Panasonic Dmc Fx48 Operating Instructions Manual

							81VQT1X57
Advanced (Playback)
∫Operations performed during slide show
The cursor displayed during playback is the same as  3/4/2/1.
•The menu screen is restored when [ ‚] is pressed.
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting 
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when 
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
•[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures 
are played back with the recommended effects in each category.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.•[AUDIO] will be displayed only when the [EFFECT] is set to [OFF]. Audio will be played along 
with the still picture with audio by setting the [AUDIO] to [ON].
Note
•It is not possible to add new music effects.
Press  3 to select [START] and then press [MENU/
SET].
Press  4 to finish the slide show.
•Normal playback resumes after the slide show finishes.
A Play/Pause
B St op
C Back to previous picture
¢
DAhead to next picture¢
¢ These operations can be performed only in the Pause mode.
E Reduce volume level
F Increase volume level
ItemSettings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] ON/OFF
[MUSIC]/[AUDIO] ON/OFF
DMC-FX48P_PC~VQT1X57_eng.book  81 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							VQT1X5782
Advanced (Playback)
[PLAYBACK] mode: ¸
Selecting Pictures and Playing them Back 
( [ C AT E G O R Y  P L AY ] / [ FAV O R I T E  P L AY ] )
This mode allows you to search images by Scene mode or other categories (such as 
[PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the 
categories. You can then play back the pictures in each category.
Perform steps 1 and  2 on page 80.
Press  3/4 to select [CATEGORY PLAY], and then press [MENU/SET].
.
¢ 1 Press 3/ 4/2/1  to select the person to playback and then press [MENU/SET].
Face Recognition may not be possible or may not recognize faces correctly 
even for registered faces, depending on the facial expression and environment.
¢  2 The travel dates of images in the clipboard folder are not categorized.
[CATEGORY PLAY]
Press  3/4/ 2/1 to select the category and then 
press [MENU/SET] to set.
•If a picture is found in a category, the category icon turns blue.•It may take time to search the picture files if there are a lot on the 
card or the built-in memory.
•If you press [ ‚] while searching, the searching will stop halfway.•Pictures are sorted into the categories shown below.
[CATEGORY]Recording information 
e.g. Scene modes[CATEGORY]Recording information e.g. Scene modes
[FACE RECOG.]
¢ 1[SPORTS], [PARTY], 
[CANDLE LIGHT], 
[FIREWORKS], [BEACH], 
[SNOW], 
[AERIAL PHOTO]
*  [PORTRAIT], 
[i-PORTRAIT], 
[SOFT SKIN], 
[TRANSFORM],  
[SELF PORTRAIT], 
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[BABY1]/[BABY2],
[i-BABY]
, 
[SCENERY], 
[i-SCENERY], [SUNSET], 
[AERIAL PHOTO]Î 
[BABY1]/[BABY2], 
[i-BABY]
í 
[PET]
.  [NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[NIGHT SCENERY], 
[i-NIGHT SCENERY], 
[STARRY SKY]
1 
[FOOD]
< [UNDERWATER]
[TRAVEL DATE]¢2
Í  [MOTION PICTURE]
DMC-FX48P_PC~VQT1X57_eng.book  82 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							83VQT1X57
Advanced (Playback)
You can play back the pictures you have set as [FAVORITE] (P92) (Only when 
[FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]).
Perform steps 1 and  2 on page 80.
Press  3/4 to select [FAVORITE PLAY], and then press [MENU/SET].
Note
•You can use only [ROTATE DISP.], [PRINT SET], [PROTECT] or  [AUDIO DUB.] in the 
[PLAYBACK] menu.
[FAVORITE PLAY]
DMC-FX48P_PC~VQT1X57_eng.book  83 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							VQT1X5784
Advanced (Playback)
[PLAYBACK] mode: ¸
Playing Back Motion Pictures/Pictures with Audio
Press 2/1 to select a picture with a motion picture 
icon (such as [ ]), and then press  3 to play back.
AThe motion picture recording time
B Motion picture icon
C Motion picture playback icon
•After playback starts, the elapsed playback time is displayed on the 
upper right of the screen.
For example, 8 minutes and 30 seconds is displayed as [8m30s].
∫Operations performed during motion picture playback
The cursor displayed during playback is the same as  3/4/ 2/1.
A Play/Pause
B St op
C Fast rewind, Frame-by-frame rewind
¢
DFast forward, Frame-by-frame forward¢
¢ These operations can be performed only in the Pause mode.
E Reduce volume level
F Increase volume level
Note
•Sound can be heard through the speaker. Refer to [VOLUME] (P22) for information about how 
to adjust the volume in the [SETUP] menu.
•The file format that can be played back with this camera is QuickTime Motion JPEG.•Please note that the bundled software includes QuickTime to play back motion picture files 
created with the camera on the PC.
•Some QuickTime Motion JPEG files recorded by a PC or other equipment may not play back 
on the camera.
•If you play back motion pictures that have been recorded with other equipment, the picture 
quality may deteriorate or the pictures may not play back.
•Pictures with audio recorded with other equipment may not playback on this unit.•When using a high capacity card, it is possible that fast rewinding may be slower than usual.
Motion pictures
Pictures with audio
Press  2/1  to select a picture with the audio icon [ ] 
and then press 3 to play back.
A Audio icon•Refer to [AUDIO REC.] (P76) and [AUDIO DUB.] (P95) for 
information about how to create still pictures with audio.
ABC
A
DMC-FX48P_PC~VQT1X57_eng.book  84 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							85VQT1X57
Advanced (Playback)
[PLAYBACK] mode: ¸
Using the [PLAYBACK] mode menu
You can use various functions in Playback mode to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [TRIMMING] or [LEVELING], a new edited picture is created. A 
new picture cannot be created if there is no free space on the built-in memory or the card so we 
recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2009.•If you take pictures after setting the travel destination in [WORLD TIME], the pictures are 
displayed by the dates at the travel destination in calendar playback.
 [CALENDAR]
Select [CALENDAR] on the [PLAYBACK] mode menu. (P20)
•You can also rotate the zoom lever several times towards [ L] (W) to display the 
calendar screen. (P36)
Press  3/4/2/1 to select the date to be played 
back.
3 /4: Select the month
2 /1: Select the date
•
If there were no pictures recorded during a month, the month is 
not displayed.
Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ‚] to return to the calendar screen.
Press  3/4/2/1 to select a picture and then press [MENU/SET].
•The picture that was selected will appear.
CAL
DMC-FX48P_PC~VQT1X57_eng.book  85 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							VQT1X5786
Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P87). (Only alphabetical characters and symbols can be 
entered.)
Names set in [BABY1]/[BABY2] and [PET] in scene mode or [LOCATION] in travel date 
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P20)
Press 3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/ 2/1 to select text and then press 
[MENU/SET] to register.
•Press [DISPLAY] to switch text between [A] (capitals), [a] (lower 
case) and [&/1] (special characters and numbers).
•The entry position cursor can be moved left and right with the 
zoom lever.
•To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
•To stop editing at any time during text entry, press [ ‚].•A maximum of 30 characters can be entered. (Maximum of 9 characters when setting 
names in [FACE RECOG.]) 
Press  3/4/ 2/1 to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
 [TITLE EDIT]
Select the picture, and then press 
[MENU/SET] to set.
•[ ’ ] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1 to 
select the picture. Press 
3/4/ 2/1 to 
select the pictures.
•
The setting is canceled when [DISPLAY] is pressed again.
DMC-FX48P_PC~VQT1X57_eng.book  86 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							87VQT1X57
Advanced (Playback)
∫Delete the title 
[SINGLE] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2Press [ ‚].3Press [MENU/SET] to close the menu.
[MULTI] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.•The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene mode or 
[LOCATION] in travel date can also be registered by using the operation in steps 4 and 
following.
•The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and 
[TITLE EDIT] cannot be registered at the same time.
•You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the 
CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use title edit for the following pictures.–Motion pictures–Protected pictures–Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P20)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
  [TEXT STAMP]
Select the picture, and then press 
[MENU/SET] to set.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set.
•
The setting is canceled when [DISPLAY] 
is pressed again.
[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4/2/1 to 
select the pictures.
DMC-FX48P_PC~VQT1X57_eng.book  87 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							VQT1X5788
Advanced (Playback)
Press 3/4/2 /1  to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P53)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for pictures that have already been recorded 
with text in [FACE RECOG.] or [BABY1]/[BABY2] and [PET] name settings in Scene 
mode, [LOCATION] in travel date or [TITLE EDIT].
Press [MENU/SET].
•If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture 
size will become smaller as shown below.
•The picture becomes slightly rougher.
Press  3 to select [YES] and then press [MENU/
SET].
•The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [ ] or less.
Press [ ‚] to return to the menu screen.¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the [ ] pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures with audio–Pictures recorded without setting the clock and title–Pictures that were previously stamped with [TEXT STAMP]–Pictures recorded with other equipment
[W/OTIME] : Stamp the year, month and date.
[WITHTIME] : Stamp the year, month, day, hour and minutes.
Aspect ratio settingPicture size
X
 //> 
Y // > 
W // > 
DMC-FX48P_PC~VQT1X57_eng.book  88 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							89VQT1X57
Advanced (Playback)
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a 
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be 
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu. (P20)
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is 
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT STAMP] cannot be 
resized.
Q  [RESIZE] Reducing the picture size (number of pixels)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting1Press  2/1 to select the picture, 
and then press [MENU/SET].
2Press  2/1 to select the size¢, and 
then press [MENU/SET].
¢ Only the sizes to which the pictures can 
be resized is displayed.
[SINGLE]
[MULTI] setting
1Press  3/4 to select the size, and 
then press [MENU/SET].
•
When [DISPLAY] is pressed, an 
explanation of resizing is displayed.
2Press  3/4/ 2/1 to select the 
picture, and then press [DISPLAY].
•
Repeat this step for each picture, and 
press [MENU/SET] to set.
[MULTI]
DMC-FX48P_PC~VQT1X57_eng.book  89 ページ  ２００８年１２月２６日　金曜日　午後６時２５分 
						

							VQT1X5790
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu. (P20)
Press [MENU/SET].
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of the trimmed picture may become smaller than 
that of the original picture.
•The picture quality of the trimmed picture will deteriorate.•It may not be possible to trim pictures recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT STAMP] cannot be 
trimmed.
  [TRIMMING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Use the zoom lever and press 
3/ 4/2/1  to select the parts 
to be trimmed.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3/ 4/2/ 1: Move Reduction Enlargement
()
Move the position
()
DMC-FX48P_PC~VQT1X57_eng.book  90 ページ  ２００８年１２月２６日　金曜日　午後６時２５分