Panasonic Dmc Ft1 Operating Instructions Manual
Have a look at the manual Panasonic Dmc Ft1 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 136
Advanced (Playback)
- 136 -
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu. (P27)
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-135.png "Page 136
Advanced (Playback)
- 136 -
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu. (P27)
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to...")
![Page 137
- 137 -
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu. (P27)
Press [MENU/SET].
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of the trimmed picture may become smaller than
that of the original picture.
•The picture quality of the trimmed picture will deteriorate.•It may not be...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-136.png "Page 137
- 137 -
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu. (P27)
Press [MENU/SET].
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of the trimmed picture may become smaller than
that of the original picture.
•The picture quality of the trimmed picture will deteriorate.•It may not be...")
![Page 138
Advanced (Playback)
- 138 -
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] mode menu. (P27)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Quality of image may become coarse when levelling is performed. •Recorded pixels may decrease compared to or iginal image when levelling is performed.•Levelling may not be performed on images recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-137.png "Page 138
Advanced (Playback)
- 138 -
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] mode menu. (P27)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Quality of image may become coarse when levelling is performed. •Recorded pixels may decrease compared to or iginal image when levelling is performed.•Levelling may not be performed on images recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT...")
![Page 139
- 139 -
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P27)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-138.png "Page 139
- 139 -
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P27)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and...")
![Page 140
Advanced (Playback)
- 140 -
You can do the following if a mark has been added to pictures and they have been set as
favourites.
•
Play back only the pictures set as favourites. ([FAVORITE PLAY])•Play back the pictures set as favourites only as a slide show.•Delete all the pictures not set as favourites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] mode menu. (P27)
∫Cancelling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-139.png "Page 140
Advanced (Playback)
- 140 -
You can do the following if a mark has been added to pictures and they have been set as
favourites.
•
Play back only the pictures set as favourites. ([FAVORITE PLAY])•Play back the pictures set as favourites only as a slide show.•Delete all the pictures not set as favourites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] mode menu. (P27)
∫Cancelling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to...")
![Page 142
Advanced (Playback)
- 142 -
∫Cancelling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-141.png "Page 142
Advanced (Playback)
- 142 -
∫Cancelling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to...")
![Page 143
- 143 -
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P27)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫ Cancelling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while cancelling pr otection, the cancelling...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-142.png "Page 143
- 143 -
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P27)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫ Cancelling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while cancelling pr otection, the cancelling...")
![Page 144
Advanced (Playback)
- 144 -
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P27)
Note
•Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
[AUDIO...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-143.png "Page 144
Advanced (Playback)
- 144 -
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P27)
Note
•Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
[AUDIO...")
![Page 145
- 145 -
Advanced (Playback)
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P27)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for
[CATEGORY PLAY].
•Clearing of [FACE RECOG .] cannot be done of the protected image.
You can copy data of pictures you have shot from the built-in memory onto a card, from a
card into...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-144.png "Page 145
- 145 -
Advanced (Playback)
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P27)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for
[CATEGORY PLAY].
•Clearing of [FACE RECOG .] cannot be done of the protected image.
You can copy data of pictures you have shot from the built-in memory onto a card, from a
card into...")
![Page 146
Advanced (Playback)
- 146 -
Press 3 to select [YES], and then press [MENU/
SET].
•If you press [MENU/SET] while copying pictures from the built-in
memory to the card, the copying will stop halfway.
•Do not turn the camera off at any point during the copying
process.
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the
screen automatically returns to the playback screen.
Note
•If you copy...](http://img.usermanuals.tech/thumb/58/65805/w64_dmc-ft1_en_adv_om_d-145.png "Page 146
Advanced (Playback)
- 146 -
Press 3 to select [YES], and then press [MENU/
SET].
•If you press [MENU/SET] while copying pictures from the built-in
memory to the card, the copying will stop halfway.
•Do not turn the camera off at any point during the copying
process.
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the
screen automatically returns to the playback screen.
Note
•If you copy...")
- 141 - Advanced (Playback) DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card (P145) and then set the print setting. Select [PRINT SET] on the [PLAYBACK] mode menu. (P27) Press 3/4 to set the number of prints, and then press [MENU/SET] to set. •When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not possible to use the same setting for a multiple number of pictures.) Press [ ‚] to return to the menu screen. •Press [MENU/SET] to close the menu. [PRINT SET] Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET]. [SINGLE] [MULTI] Press 2/1 to select the picture. Press 3/4 /2 /1 to select the pictures.
Advanced (Playback) - 142 - ∫Cancelling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET]. 3Press [MENU/SET] to close the menu. •You cannot select [CANCEL] if not even one picture has been set for printing. ∫ To print the date After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY]. • When you go to a photo printing store for digital printing, be sure to order the printing of the date additionally if required. •Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer. •The date cannot be printed on pictures stamped with text. Note •The number of prints can be set from 0 to 999.•With a printer supporting PictBridge, the date print settings of the printer may take precedence so check if this is the case. •It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings. •If the file is not based on the DCF standard, the print setting cannot be set.
- 143 - Advanced (Playback) You can set protection for pictures you do not want to be deleted by mistake. Select [PROTECT] on the [PLAYBACK] mode menu. (P27) Press [ ‚] to return to the menu screen. •Press [MENU/SET] to close the menu. ∫ Cancelling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET]. 3Press [MENU/SET] to close the menu. •If you press [MENU/SET] while cancelling pr otection, the cancelling will stop halfway. Note •The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in memory or the card is formatted. •Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK]. [PROTECT] Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET]. When [MULTI] has been selected •Repeat these steps for each picture.•The settings are cancelled when [MENU/ SET] is pressed again. [SINGLE] [MULTI] Press 2/1 to select the picture. Press 3/4 /2 /1 to select the pictures.
Advanced (Playback) - 144 - You can add the audio after taking a picture. Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P27) Note •Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures with audio recorded by this camera cannot be played back by older models of Panasonic digital camera (LUMIX) launched before July 2008. [AUDIO DUB.] Press 2/1 to select the picture and then press [MENU/SET] to start audio recording. •The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Press 3 to select [YES] and then press [MENU/SET] to start audio recording. (The original audio is overwritten.) •Audio is recorded from the built-in microphone on the camera.•If you press [ ‚], the audio dubbing is cancelled. Press [MENU/SET] to stop recording. •It will automatically stop after recording about 10 seconds without pressing [MENU/SET]. Press [ ‚] to return to the menu screen. •Press [MENU/SET] to close the menu.
- 145 - Advanced (Playback) All the information regarding the [FACE RECOG.] of the selected image will be cleared. Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P27) Note •Cleared information regarding the [FACE RECOG.] cannot be restored.•Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for [CATEGORY PLAY]. •Clearing of [FACE RECOG .] cannot be done of the protected image. You can copy data of pictures you have shot from the built-in memory onto a card, from a card into the built-in memory or from a card into the dedicated clipboard folder. Select [COPY] on the [PLAYBACK] mode menu. (P27) Press 3/4 to select the copy destination and then press [MENU/SET]. Press 2/1 to select the picture and then press [MENU/SET]. [FACE RECOG.] Press 2/1 to select the picture and then press [MENU/SET]. Press 3 to select [YES] and then press [MENU/SET]. Press [ ‚] to return to the menu screen. •Press [MENU/SET] to close the menu. [COPY] : All the picture data in the built-in memory are copied onto the card at one time. > step 4. : One picture at a time is copied from the card to the built-in memory. > step 3. : The images are copied from the card to the dedicated clipboard folder (built-in memory) one at a time. (Motion pictures cannot be copied.) > Step 3. –When copying clipboard pictures onto a card, select [COPY] on the clipboard playback menu. (P121)
Advanced (Playback) - 146 - Press 3 to select [YES], and then press [MENU/ SET]. •If you press [MENU/SET] while copying pictures from the built-in memory to the card, the copying will stop halfway. •Do not turn the camera off at any point during the copying process. Press [ ‚] to return to the menu screen. •Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the screen automatically returns to the playback screen. Note •If you copy picture data from the built-in memory to a card which does not have sufficient free space, the picture data will only be copied halfway. We recommend using a card which has more free space than the built-in memory (about 40 MB). •If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in the copy destination when [ ] is selected, a new folder is created and the picture is copied. If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in the copy destination when [ ] is selected, that picture is not copied. (P177) •It may take time to copy the picture data.•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied. (Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.) •Print settings on the original picture data will not be copied. Set the print settings again after copying is finished. •Motion picture recorded in [AVCHD Lite] cannot be copied.
- 147 - Advanced (Playback) [PLAYBACK] mode: ¸ Playing Back Pictures on a TV Screen Preparations: Set the [TV ASPECT]. (P34) Turn this unit and the TV off. 1 Yellow: to the video input socket 2 White: to the audio input socket 3 Red: to the audio input socket A Align the marks, and insert. B AV cable (supplied) •Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause trouble.) Connect the AV cable B (supplied) to the video input and the audio input sockets on the TV. Connect the AV cable to the [AV] socket on the camera. Turn the TV on and select external input. Turn the camera on. Note •Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or the left and right of the pictures. •Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set [VIDEO OUT] in the [SETUP] menu. •Audio will be played back in monaural. Playing back pictures using the AV cable (supplied)
Advanced (Playback) - 148 - Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory Card slot.Note • Depending on the TV model, pictures may not be displayed on the full screen.•Motion pictures recorded with [AVCHD Lite] can be played back on Panasonic TVs (VIERA) with the AVCHD logo mark. In all other cases, connect the camera to the TV using the AV cable (supplied) and playback the motion picture. •You cannot play back pictures on SDHC cards if the TV does not support these cards.•You may not be able to play back MultiMediaCards. You can enjoy high quality pictures and motion pictures on the TV by connecting the camera with the HDMI compatible high definition TV using HDMI mini cable (optional). Playing back pictures on a TV with an SD Memory Card slot Playing back on the TV with HDMI socket What is HDMI? HDMI is the interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound. If you connect this unit to a Panasonic TV compatible with VIERA Link, linked operations (VIERA Link) are possible. (P150)
- 149 - Advanced (Playback) Preparations: Check the [HDMI MODE]. (P35) Turn this unit and the TV off. 1 HDMI socket 2 TV with HDMI socket 3 HDMI mini (C type) A Align the marks, and insert. B HDMI mini cable (optional) • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) Connect the HDMI mini cable B (optional) to the HDMI input socket on the TV. Connect the HDMI mini cable to the [HDMI] socket on the camera. Turn the TV on and switch to HDMI input. Turn the camera on and then press [ (]. •When [VIERA Link] (P35) is set to [ON] and the camera is connected to a TV supporting VIERA Link, input of the TV will be switched automatically and playback screen will be displayed (P150). (Except for memo mode) HDMI IN
Advanced (Playback) - 150 - Note •Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left and right of the pictures. •Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). Part numbers: RP-CDHM15 (1.5 m), RP-CDHM30 (3.0 m) •Output from the HDMI mini cable has priority when both AV cable and HDMI mini cable are connected. •HDMI output is not possible even if you conne ct the HDMI mini cable while the unit is connected to the PC or the printer. •HDMI connection is disabled and connection with the USB connection cable will take priority when you connect the USB connection cable while the HDMI mini cable is connected (P148). •Image is not displayed on the LCD monitor when the HDMI mini cable is connected.•When pictures are displayed, they may not be displayed properly depending on the type of TV.•Read the operating instructions for the TV.•Audio will be played back in monaural. Playback using VIERA Link (HDMI) (HDAVI Control™) What is the VIERA Link? • This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.) •VIERA Link is a unique Panasonic function built on a HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with HDMI CEC compatible devices made by other companies are not guaranteed. When using devices made by other companies that are compatible with VIERA Link, refer to the operating instructions for the respective devices. •This unit is compatible with VIERA Link Ver.4. VIERA Link Ver.4 is the newest Panasonic version and is also compatible with existing Panasonic VIERA Link devices. (As of December 2008)