Panasonic Dmc Ft1 Operating Instructions Manual

							- 131 -
Advanced (Playback)
[PLAYBACK] mode: ¸
Using the [PLAYBACK] mode menu
You can use various functions in playback mode to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [TRIMMING] or [LEVELING], a new edited picture is created. A 
new picture cannot be created if there is no free space on the built-in memory or the card so we 
recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as the 1st January, 2009.•If you take pictures after setting the travel destination in [WORLD TIME], the pictures are 
displayed by the dates at the travel destination in calendar playback.
[CALENDAR]
Select [CALENDAR] on the [PLAYBACK] mode menu.  (P27)
•You can also slide the zoom lever several times towards [L] (W) to display the 
calendar screen.  (P50)
Press 3/4/2/ 1 to select the date to be played 
back.
3 /4 : Select the month
2 /1 : Select the date
•
If there were no pictures recorded during a month, the month is 
not displayed.
Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ‚] to return to the calendar screen.
Press  3/4/2/ 1 to select a picture and then press [MENU/SET].
•The picture that was selected will appear. 
						

							Advanced (Playback)
- 132 -
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P134). (Only alphabetic characters and symbols can be 
entered.)
Names set in [BABY1]/[BABY2] and [PET] in scene mode or [LOCATION] in travel date 
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] mode menu.  (P27)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/2/ 1 to select text and then press 
[MENU/SET] to register.
•Press [DISPLAY] to switch text between [A] (capitals), [a] (small 
case) and [&/1] (special characters and numbers).
•The entry position cursor can be moved left and right with the 
zoom lever.
•To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
•To stop editing at any time during text entry, press [ ‚].•A maximum of 30 characters can be entered.(Maximum of 9 characters when setting 
names in [FACE RECOG.])
Press  3/4/2/ 1 to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
[TITLE EDIT]
Select the picture, and then press 
[MENU/SET] to set.
•[ ’] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures.
•
The setting is cancelled when [DISPLAY] is pressed again. 
						

							- 133 -
Advanced (Playback)
∫Delete the title 
[SINGLE] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2Press [ ‚].3Press [MENU/SET] to close the menu.
[MULTI] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].2Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.•The name setting of [FACE RECOG.] or [BAB Y1]/[BABY2] and [PET] in scene mode or 
[LOCATION] in travel date can also be registered by using the operation in steps 4 and 
following.
•The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and 
[TITLE EDIT] cannot be registered at the same time.
•You can print out texts (comments) using the “PHOTOfunSTUDIO 3.0 HD Edition” bundled 
software on the CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use title edit for the following pictures.–Motion pictures–Protected pictures–Pictures recorded with other equipment 
						

							Advanced (Playback)
- 134 -
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu.  (P27)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/2/ 1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE]  (P73)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for pictures that have already been recorded 
with text in [FACE RECOG.] or [BABY1]/[BABY2] and [PET] name settings in scene 
mode, [LOCATION] in travel date or [TITLE EDIT].
[TEXT STAMP]
Select the picture, and then press 
[MENU/SET] to set.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set.
•
The setting is cancelled when [DISPLAY] 
is pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures.
[W/OTIME] : Stamp the year, month and date.
[WITHTIME] : Stamp the year, month, day, hour and minutes. 
						

							- 135 -
Advanced (Playback)
Press [MENU/SET].
•If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture 
size will become smaller as shown below.
•The picture becomes slightly rougher.
Press 3 to select [YES] and then press [MENU/
SET].
•The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [ ] or less.
Press [ ‚] to return to the menu screen.¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the [ ] pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures with audio–Pictures recorded without setting the clock and title–Pictures that were previously stamped with [TEXT STAMP]–Pictures recorded with other equipment
Aspect ratio settingPicture size
X
 //> 
Y // > 
W // >  
						

							Advanced (Playback)
- 136 -
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a 
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be 
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu. (P27)
Press  3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is 
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
resized.
 [RESIZE] Reducing the picture size (number of pixels)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting
1Press  2/1  to select the picture, and 
then press [MENU/SET].
2Press  2/1  to select the size¢, and then 
press [MENU/SET].
¢ Only the sizes to which the pictures can be 
resized is displayed.
[SINGLE]
[MULTI] setting
1Press  3/4  to select the size, and then 
press [MENU/SET].
•
When [DISPLAY] is pressed, an explanation 
of resizing is displayed.
2Press  3/4 /2 /1 to select the picture, 
and then press [DISPLAY].
•
Repeat this step for each picture, and press 
[MENU/SET] to set.
[MULTI] 
						

							- 137 -
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu. (P27)
Press [MENU/SET].
Press  3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of  the trimmed picture may become smaller than 
that of the original picture.
•The picture quality of the trimmed picture will deteriorate.•It may not be possible to trim pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
trimmed.
[TRIMMING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Use the zoom lever and press 
3/ 4/2/1 to select the parts 
to be trimmed.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2 /1: Move Reduction Enlargement
()
Move the position
() 
						

							Advanced (Playback)
- 138 -
Minute tilting of the image can be adjusted. 
Select [LEVELING] on the [PLAYBACK] mode menu. (P27)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Quality of image may become coarse when levelling is performed. •Recorded pixels may decrease compared to or iginal image when levelling is performed.•Levelling may not be performed on images recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT STAMP] cannot be 
levelled.
[LEVELING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Press  2/1 to adjust the tilting, and press [MENU/
SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.
Press  3 to select [YES] and then press [MENU/
SET]. 
						

							- 139 -
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] mode menu.  (P27)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif  is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•The display is not rotated during multi playback  (P50) or [CALENDAR]  (P131).•Pictures recorded with the camera upside down will not be displayed rotated.
[ROTATE DISP.]
Press  4 to select [ON] and then press [MENU/SET].
•The pictures are displayed without being rotated when you select 
[OFF].
•Refer to  P49 for information about how to play back pictures.
Press [MENU/SET] to close the menu. 
						

							Advanced (Playback)
- 140 -
You can do the following if a mark has been added to pictures and they have been set as 
favourites.
•
Play back only the pictures set as favourites. ([FAVORITE PLAY])•Play back the pictures set as favourites only as a slide show.•Delete all the pictures not set as favourites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] mode menu.  (P27)
∫Cancelling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set as a favourite.
Note
•You can set up to 999 pictures as favourites.•When printing pictures at a photo printing store, [ALL DELETE EXCEPT Ü] (P53)  is useful so 
only the pictures you want to be printed remain on the card.
•You may not be able to set pictures taken with other equipment as favourites.•You can perform, check and cancel the settings of images as favourites using the “PHOTOfunSTUDIO 3.0 HD Edition” bundled software on the CD-ROM (supplied).
[FAVORITE]
Press  4 to select [ON] and then press [MENU/SET].
•You cannot set pictures as favourites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to [OFF] 
even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press  2/1 to select the picture and then press  4.
•Repeat the above procedure.•If 4  is pressed again, the favourite setting is cancelled.