Home
>
Panasonic
>
Projector
>
Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions
Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions
Have a look at the manual Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 6 Appendix — Technical information ENGLISH - 181 3D compatible signal Resolution (Dots) Scanning freq. Dot clock freq. (MHz) HDMI DVI - DHorizontal (kHz)Vertical(Hz) FPSBS*1TB FSSBS*1TB LBL FS 1280 x 720 1 280 x 720 37.1 49.8 60.5 ― ― ― ― l― ― ― 1 280 x 720 44.8 59.9 74.5 ― ― ― ― l― ― ― 1 280 x 720 76.3 100.0 131.8 ― ― ― l― ― ― l 1 280 x 720 92.6 120.0 161.6 ― ― ― l― ― ― l 1280 x 768 1 280 x 768 39.6 49.9 65.3 ― ― ― ― l― ― ― 1 280 x 768 47.8 59.9 79.5 ― ― ― ― l― ― ― 1 280 x 768 *247.4 60.0 68.3 ― ― ― ― l― ― ― 1280 x 800 1 280 x 800 41.3 50.0 68.0 ― ― ― ― l― ― ― 1 280 x 800 49.7 59.8 83.5 ― ― ― ― l― ― ― 1 280 x 800 *249.3 59.9 71.0 ― ― ― ― l― ― ― MSXGA 1 280 x 960 60.0 60.0 108.0 ― ― ― ― l― ― ― SXGA 1 280 x 1 024 52.4 50.0 88.0 ― ― ― ― l― ― ― 1 280 x 1 024 64.0 60.0 108.0 ― ― ― ― l― ― ― 1366 x 768 1 366 x 768 47.7 59.8 85.5 ― ― ― ― l― ― ― 1 366 x 768 39.6 49.9 69.0 ― ― ― ― l― ― ― SXGA+ 1 400 x 1 050 54.1 50.0 99.9― ― ― ― l― ― ― 1 400 x 1 050 64.0 60.0 108.0 ― ― ― ― l― ― ― 1 400 x 1 050 65.2 60.0 122.6 ― ― ― ― l― ― ― 1 400 x 1 050 65.3 60.0 121.8 ― ― ― ― l― ― ― WXGA+ 1 440 x 900 55.9 59.9 106.5 ― ― ― ― l― ― ― 1 440 x 900 46.3 49.9 86.8 ― ― ― ― l― ― ― UXGA60 1 600 x 1 200 75.0 60.0 162.0 ― ― ― ― l― ― ― WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 ― ― ― ― l― ― ― 1 680 x 1 050 54.1 50.0 119.5 ― ― ― ― l― ― ― 1920 x 1080 1 920 x 1 080 55.6 49.9 141.5 ― ― ― ― l― ― ― 1 920 x 1 080 *266.6 59.9 138.5 ― ― ― ― l― ― ― WUXGA 1 920 x 1 200 61.8 49.9 158.3 ― ― ― ― l― ― ― 1 920 x 1 200 *274.0 60.0 154.0 ― ― ― ― l― l― *1 Supports half. *2 VESA CVT RB (Reduced Blanking)-compliant
Chapter 6 Appendix — Technical information 182 - ENGLISH 3D compatible signal Resolution (Dots) Scanning freq. Dot clock freq. (MHz) RGB1/RGB2 SDI*1 H-DR1-2Horizontal (kHz)Vertical(Hz)SBS*2TBLBLFSSBS*2TBLBL3G 750 (720)/60p 1 280 x 720 45.0 60.0 74.3 l l l― l l l l l l 750 (720)/50p 1 280 x 720 37.5 50.0 74.3 l l l― l l l l l l 1080/60i 1 920 x 1 080i 33.8 60.0 74.3 l l― ― l l― l l l 1080/50i 1 920 x 1 080i 28.1 50.0 74.3 l l― ― l l― l l l 1080/24p 1 920 x 1 080 27.0 24.0 74.3 l l― ― l l― l l l 1080/24sF 1 920 x 1 080i 27.0 48.0 74.3 l l― ― l l― l l l 1080/25p 1 920 x 1 080 28.1 25.0 74.3 l l― ― l l― l l l 1080/30p 1 920 x 1 080 33.8 30.0 74.3 l l― ― l l― l l l 1080/60p 1 920 x 1 080 67.5 60.0 148.5 l l― ― l l― ― l l 1080/50p 1 920 x 1 080 56.3 50.0 148.5 l l― ― l l― ― l l VGA480 640 x 480 31.5 59.9 25.2 l― ― ― ― ― ― ― ― ― SVGA 800 x 600 37.9 60.3 40.0 l― ― ― ― ― ― ― ― ― XGA 1 024 x 768 39.6 50.0 51.9 l― ― ― ― ― ― ― l l 1 024 x 768 48.4 60.0 65.0 l― ― ― ― ― ― ― l l 1 024 x 768 81.4 100.0 113.3 ― ― ― l― ― ― ― ― ― 1 024 x 768 98.8 120.0 139.1 ― ― ― l― ― ― ― ― ― MXGA 1 152 x 864 53.7 60.0 81.6 l― ― ― ― ― ― ― ― ― 1280 x 720 1 280 x 720 37.1 49.8 60.5 l― ― ― ― ― ― ― ― ― 1 280 x 720 44.8 59.9 74.5 l― ― ― ― ― ― ― ― ― 1 280 x 720 76.3 100.0 131.8 ― ― ― l― ― ― ― ― ― 1 280 x 720 92.6 120.0 161.6 ― ― ― l― ― ― ― ― ― 1280 x 768 1 280 x 768 39.6 49.9 65.3 l― ― ― ― ― ― ― ― ― 1 280 x 768 47.8 59.9 79.5 l― ― ― ― ― ― ― ― ― 1 280 x 768 *347.4 60.0 68.3 l― ― ― ― ― ― ― ― ― 1280 x 800 1 280 x 800 41.3 50.0 68.0 l― ― ― ― ― ― ― l l 1 280 x 800 49.7 59.8 83.5 l― ― ― ― ― ― ― l l 1 280 x 800 *349.3 59.9 71.0 l― ― ― ― ― ― ― l l MSXGA 1 280 x 960 60.0 60.0 108.0 l― ― ― ― ― ― ― ― ― SXGA 1 280 x 1 024 52.4 50.0 88.0 l― ― ― ― ― ― ― ― ― 1 280 x 1 024 64.0 60.0 108.0 l― ― ― ― ― ― ― ― ― 1366 x 768 1 366 x 768 47.7 59.8 85.5 l― ― ― ― ― ― ― ― ― 1 366 x 768 39.6 49.9 69.0 l― ― ― ― ― ― ― ― ― SXGA+ 1 400 x 1 050 54.1 50.0 99.9 l― ― ― ― ― ― ― ― ― 1 400 x 1 050 64.0 60.0 108.0 l― ― ― ― ― ― ― ― ― 1 400 x 1 050 65.2 60.0 122.6 l― ― ― ― ― ― ― ― ― 1 400 x 1 050 65.3 60.0 121.8 l― ― ― ― ― ― ― ― ― WXGA+ 1 440 x 900 55.9 59.9 106.5 l― ― ― ― ― ― ― ― ― 1 440 x 900 46.3 49.9 86.8 l― ― ― ― ― ― ― ― ― UXGA60 1 600 x 1 200 75.0 60.0 162.0 l― ― ― ― ― ― ― ― ― WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 l― ― ― ― ― ― ― ― ― 1 680 x 1 050 54.1 50.0 119.5 l― ― ― ― ― ― ― ― ― 1920 x 1080 1 920 x 1 080 55.6 49.9 141.5 l― ― ― ― ― ― ― ― ― 1 920 x 1 080 *366.6 59.9 138.5 l― ― ― ― ― ― ― ― ― WUXGA 1 920 x 1 200 61.8 49.9 158.3 l― ― ― ― ― ― ― l l 1 920 x 1 200 *374.0 60.0 154.0 l― l― ― ― ― ― l l *1 Only for PT-DZ870U *2 Supports half. *3 VESA CVT RB (Reduced Blanking)-compliant Note fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
Chapter 6 Appendix — Specifications ENGLISH - 183 Specifications The specifications of the projector are as follows. Power supplyAC 120 V - 240 V, 50 Hz/60 Hz Power consumption 1 030 W (10 A - 5.2 A) 0.3 W when [STANDBY MODE] is set to [ECO] 3 W when [STANDBY MODE] is set to [NORMAL] DLP chip Size PT - DZ870U17 mm (0.67") (aspect ratio 16:10) PT - DW830U16.5 mm (0.65") (aspect ratio 16:10) PT - DX100U17.8 mm (0.7") (aspect ratio 4:3) Display system 1-unit DLP chip, DLP type Number of pixels PT - DZ870U2 304 000 pixels (1 920 x 1 200 dots) PT - DW830U1 024 000 pixels (1 280 x 800 dots) PT - DX100U786 432 pixels (1 024 x 768 dots) Lens *1Electric zoom PT- DZ870U 1.7 - 2.4:1 PT- DW830U, PT- DX100U1.8 - 2.5:1 Electric focus F = 1.7 - 1.9 f = 25.6 mm - 35.7 mm Luminous lamp 420 W UHM lamp x 2 Light output *2*3PT- DZ870U, PT- DW830U 8 500 lm(ANSI) PT - DX100U 10 000 lm(ANSI) Contrast ratio *310 000:1 (when [DYNAMIC IRIS] is set to [3]) Color system 7 standards (NTSC/NTSC4.43/P AL/PAL - N/PAL - M/SECAM/PAL60) Projection screen size *41.27 m (50") to 15.24 m (600") Screen aspect ratio PT - DZ870U, PT - DW830U 16:10 PT - DX100U 4:3 Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR] Power cable length 3.0 m (118-1/8") Outer case Molded plastic Dimensions Width 498 mm (19-19/32") Height 200 mm (7-7/8") (with legs at shortest position) Depth PT - DZ870U, PT - DW830U, PT - DX100U 556 mm (21-7/8") (including standard zoom lens) PT - DZ870UL, PT - DW830UL, PT - DX100UL 513 mm (20-3/16") (excluding optional lens) Weight PT - DZ870U, PT - DW830U, PT - DX100U Approx. 18.3 k] (40 lbs.) *5 (including standard zoom lens) PT - DZ870UL, PT - DW830UL, PT - DX100UL Approx. 17.6 k] (38.8 lbs.) *5 (excluding optional lens) Noise level *340 dB Operating environment Operating environment temperature *60 °C (32 °F) to 45 °C (113 °F) Operating environment humidity 10 % - 80 % (No condensation) Remote control Power supply DC 3 V (AAA/R03 battery x 2) Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver) Weight 102 ] (3.6 oz.) (including batteries) Dimensions Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16") *1 For PT-DZ870UL, PT- DW830UL, and PT- DX100UL, lenses are optional accessories. *2 V alue is for the supplied standard zoom lens. The value varies depending on the lens. *3 Measurement, measuring conditions and method of notation all comply with ISO21 1 18 international standards. *4 When the ET- DLE055 lens is used, the maximum size is 5.08 m (200"). *5 A verage value. Weight varies for each product. *6 When using the projector at high altitudes (1 400 m (4 593') or higher – lower than 2 700 m (8 858') above sea level), the operating environment temperature should be between 0 °C (32 °F) - 40 °C (104 °F). If you use the Replacement lamp unit (for portrait mode), the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) when using the projector at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 35 °C (95 °F) when using the projector at high altitudes. If the [PROJECTOR SETUP] menu → [LAMP SELECT] is set to [DUAL], and [LAMP POWER] is set to [NORMAL], and the operating environment temperature reaches 40 °C (104 °F) or higher (35 °C (95 °F) or higher when [HIGH ALTITUDE MODE] is set to [ON]), the light output may drop by approx. 20 % to protect the projector.
Chapter 6 Appendix — Specifications 184 - ENGLISH rApplicable scanning frequency Refer to “List of compatible signals” ( x page 178) for the types of video signals that can be used with the projector . For video signal (including Y/C signal)Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz For RGB signal Horizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 Hz PIAS (Panasonic Intelligent Auto Scanning) system f Dot clock frequency: 162 MHz or less For YC BCR/YPBPR signal f 525i (480i) Horizontal: 15.75 kHz, Vertical: 60 Hz f 525p (480p) Horizontal: 31.5 kHz, Vertical: 60 Hz f 750 (720)/60p Horizontal: 45 kHz, Vertical: 60 Hz f 1 125 (1035)/60i Horizontal: 33.75 kHz, Vertical: 60 Hz f 1 125 (1080)/50i Horizontal: 28.13 kHz, Vertical: 50 Hz f1 125 (1080)/24sF Horizontal: 27 kHz, Vertical: 48 Hz f1 125 (1080)/30p Horizontal: 33.75 kHz, Vertical: 30 Hz f1 125 (1080)/50p Horizontal: 56.25 kHz, Vertical: 50 Hz f625i (576i) Horizontal: 15.63 kHz, Vertical: 50 Hz f 625p (576p) Horizontal: 31.25 kHz, Vertical: 50 Hz f 750 (720)/50p Horizontal: 37.5 kHz, Vertical: 50 Hz f 1 125 (1080)/60i Horizontal: 33.75 kHz, Vertical: 60 Hz f 1 125 (1080)/24p Horizontal: 27 kHz, Vertical: 24 Hz f1 125 (1080)/25p Horizontal: 28.13 kHz, Vertical: 25 Hz f1 125 (1080)/60p Horizontal: 67.5 kHz, Vertical: 60 Hz fThe SYNC/HD and VD terminals do not support 3 value SYNC. For DVI - D signal 525i (480i) *1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p f Displayable resolution: VGA to WUXGA (non-interlaced) fDot clock frequency: 25 MHz to 162 MHz For HDMI signal 525i (480i) *1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p f Displayable resolution: VGA to WUXGA (non-interlaced) fDot clock frequency: 25 MHz to 162 MHz For SDI signal (Only for PT - DZ870U) SD - SDI signal SMPTE ST 259 compliant YC BCR 4:2:2 10-bit 480i, 576i Single link HD - SDI signal SMPTE ST 292 compliant YP BPR 4:2:2 10-bit 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF , 1080/30p 3G - SDI signal SMPTE ST 424 compliant YP BPR 4:2:2 10-bit 1080/50p, 1080/60p RGB 4:4:4 12 - bit/10 - bit 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p *1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only Note fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
Chapter 6 Appendix — Specifications ENGLISH - 185 rTerminal terminal 1 set (BNC x 5 (RGB/YP BPR/YCBCR/YC x 1)) RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible YP BPR signal Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω Y/C signal Y : 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω terminal 1 set, high-density D - Sub 15 p (female) RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible YP BPR signal Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω terminal 1 set, DVI - D 24 p, single link DVI 1.0 compliant, HDCP compatible terminal 1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible terminal 1 set, BNC 1.0 V [p-p] 75 Ω terminal (Only for PT - DZ870U) 1 set (BNC) SD - SDI signal SMPTE ST 259 compliant HD - SDI signal SMPTE ST 292 compliant 3G - SDI signal SMPTE ST 424 compliant terminal 1 set (BNC) During input setting TTL high impedance During output setting TTL output: Maximum 10 mA terminal 1 set (BNC) TTL output: Maximum 10 mA / terminal D - Sub 9 p, 1 set each, RS - 232C compliant, for computer control / terminal M3 stereo mini jack cable, 1 set each, for remote control (wired)/projector link control terminal 1 set, D - Sub 9 p, for external control terminal 1 set, RJ - 45 network, for DIGITAL LINK connection, PJLink compatible, 100Base - TX, Art-Net compatible Note fThe model numbers of accessories and optional components are subject to change without prior notice.
Chapter 6 Appendix — Dimensions 186 - ENGLISH Dimensions Unit: mm 513 (20-3/16) 43 (1-11/16) 115.5 (4-9/16) 95 (3-3/4) 179.5 (7-1/16) 200 (7-7/8) 20.5 (13/16) 442 (17-13/32) 432 (17) 498 (19-19/32) * The above dimensions are obtained when the standard zoom lens is attached. * Actual dimensions may dif fer depending on the product.
Chapter 6 Appendix — Precautions for Ceiling Mount Bracket ENGLISH - 187 Precautions for Ceiling Mount Bracket fWhen installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket (Model No.: ET- PKD120H (for high ceilings), ET- PKD120S (for low ceilings), ET- PKD120B (Projector Mount Bracket)). Ceiling Mount Bracket (Model No.: ET- PKD120H (for high ceilings), ET - PKD120S (for low ceilings)) is used in combination with Ceiling Mount Bracket (Model No.: ET - PKD120B (Projector Mount Bracket)). f When installing the projector , attach the drop-prevention kit included with the Ceiling Mount Bracket. When the drop-prevention kit (Service Model No.: TTRA0214) is necessary, consult your dealer. f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling. fPanasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired. fUnused products must be removed promptly by a qualified technician. fUse a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or impact screwdrivers. f Read the Installation Instructions for the Ceiling Mount Bracket for details. fThe model numbers of accessories and optional accessories are subject to change without prior notice. M6 Bottom view Model No. of Ceiling Mount Bracket: ET-PKD120H (for high ceilings)ET-PKD120S (for low ceilings) 12 mm (15/32) Torque: 4±0.5 N·m ET-PKD120B (Projector Mount Bracket)
Index 188 - ENGLISH 0 – 9[3D 24Hz IMAGE POSITION] 92 [3D 24Hz IMAGE PROJECTION] 92 [3D FRAME DELA Y] 9 3 [3D INPUT FORMAT] 9 1 [3D SAFETY PRECAUTIONS] 9 4 [3D SETTINGS] 68, 90 [3D SIMUL INPUT SETTING] 9 1 [3D SYNC SETTING] 9 0 [3D SYSTEM SETTING] 9 0 [3D TEST MODE] 9 3 [3D TEST PATTERN] 9 3 AAccessories 2 0 terminal 27, 54 Adjusting adjustable feet 4 6 [ADV ANCED MENU] 67, 84 Air filter 159 Art-Net 18, 168 [Art-Net SETUP] 136 [ASPECT] 7 8 Automatic setup function 6 3 [AUT O SETUP] 9 7 button Projector body 27, 63 Remote control 25, 63 [AUTO SIGNAL] 9 7 B[BACK COLOR] 103 [BLANKING] 8 4 [BRIGHTNESS] 7 1 [BRIGHTNESS CONTROL] 111 CCautions on use 1 9 Cautions when installing 1 6 Cautions when transporting 1 6 Ceiling Mount Bracket 187 [CLAMP POSITION] 8 5 [CLOCK PHASE] 8 0 [CLOSED CAPTION SETTING] 102 [COLOR] 7 2 [COLOR CORRECTION] 9 6 [COLOR MA TCHING] 9 5 [COLOR TEMPERATURE] 7 2 Connecting the power cord 5 4 Connecting to the projector with a cable 3 0 Connection 4 9 [CONTRAST] 7 1 [CONTROL DEVICE PASSWORD CHANGE] 133 [CONTROL DEVICE SETUP] 131 [COOLING CONDITION] 109 Crestron RoomV iew 137, 153 [CUT OFF] 106 D[DATE AND TIME] 121 button Remote control 25, 66 Deleting the registered signal 127 [DIGIT AL CINEMA REALITY] 8 4 [DIGIT AL INTERFACE BOX] 136 DIGIT AL LINK 1 8 button Projector body 27, 62 Remote control 25, 62 [DIGITAL LINK IN] 99 [DIGIT AL LINK MODE] 134 [DIGIT AL LINK SETUP] 134 [DIGIT AL LINK STATUS] 135 Dimensions 186 Display language 68, 89 [DISPLAY OPTION] 68, 95 [DISPLAY SETTING] 131 Disposal 1 8 [DLP Link] 9 0 button Projector body 27, 62 Remote control 25, 62 [DVI-D IN] 9 8 [DYNAMIC IRIS] 7 5 E[EDGE BLENDING] 8 6 button Projector body 2 7 Remote control 2 5 Expanding signal lock-in range 128 FFilter indicator 157 button Remote control 25, 58 [FRAME LOCK] 8 8 [FRAME RESPONSE] 8 7 [FREEZE] 105 Function button 6 3 button Remote control 25, 63 [FUNCTION BUTTON] 121 G[GAMMA] 7 4 [GEOMETR Y(2D)] 8 0 H button Projector body 27, 62 Remote control 25, 62 [HDMI IN] 99 [HIGH ALTITUDE MODE] 109 I button Remote control 25, 29 [INITIALIZE] 123 Initial setting 22 [INPUT RESOLUTION] 8 5 Installation mode 3 2 K[KEYSTONE] 8 3 [KEYST ONE(3D)] 8 2 LLamp indicator 157 [LAMP POWER] 111 [LAMP RELAY] 11 0 [LAMP SELECT] 109 Lamp unit cover 2 6 [LEFT/RIGHT SWAP] 92 button Projector body 2 7 [LENS CALIBRA TION] 122 List of compatible signals 178 [LOAD ALL USER DATA] 123 MMain menu 6 6 Main power switch 27, 55 Maintenance 159 button Projector body 27, 65 Remote control 25, 65 Menu item 6 7 NNavigating through the menu 6 5 [NETWORK] 70, 134 Network connections 137 [NETWORK CONTROL] 136 [NETWORK SETUP] 135 [NETWORK ST ATUS] 136 [NOISE REDUCTION] 7 5 [NO SIGNAL SHUT-OFF] 120 O button Remote control 25, 61 [ON-SCREEN DISPLAY] 101 On-screen menu 6 5 Optional accessories 2 0 P[PICTURE] 67, 71 [PICTURE MODE] 7 1 [P IN P] 69, 124 P IN P function 124 [POSITION] 67, 78 Power cord 5 4 Power indicator 5 4 Power on button Projector body 2 7 Remote control 2 5 Power standby button Projector body 2 7 Remote control 2 5 Precautions for Ceiling Mount Bracket 187 Precautions for use 1 6 Projecting 5 8 [PROJECTION METHOD] 108 Projector body 2 6 [PROJECT OR ID] 108 [PROJECT OR SETUP] 69, 108 Protecting the registered signal 128 R[RASTER POSITION] 8 8 Read this first! 2 Registering new signals 127 terminal 2 8 terminal 2 8 terminal 176 [REMOTE2 MODE] 121 Remote control 2 5 Remote control operations 6 1 Removing/attaching the projection lens 4 7 Renaming the registered signal 127 Replacing the air filter unit 162 Replacing the lamp unit 160 Replacing the unit 160 Resetting to the factory default 6 6 button Remote control 25, 62 button Projector body 27, 62 [RGB IN] 9 8 RoomV iew 153 [RS-232C] 118, 171 S[SAFETY PRECAUTIONS MESSAGE] 9 4 [SA VE ALL USER DATA] 122 [SCHEDULE] 11 6 [SCREEN SETTING] 9 6 button Projector body 27, 62 Remote control 25, 62 [SDI IN] 100 Security 1 8 [SECURITY] 69, 130 [SECURITY PASSWORD] 130 [SECURITY PASSWORD CHANGE] 130 Selecting the input signal 5 8 terminal 171 terminal 171 [SER VICE PASSWORD] 123 Setting remote control ID numbers 29 Setting up 3 2 [SHARPNESS] 7 5 [SHIFT] 7 8 button Remote control 25, 58 button Projector body 27, 61 Remote control 25, 61 [SHUTTER SETTING] 104 [SIGNAL LIST] 69, 127 Specifications 183 sRGB-compliant video 7 7 [ST ANDBY MODE] 11 6 [ST ARTUP INPUT SELECT] 11 7 [ST ARTUP LOGO] 103 [ST ATUS] 11 9 button Remote control 25, 62 [SUB CLOCK PHASE] 9 3 Sub memory 129 Switching of f the projector 5 7 Switching on the projector 5 5 Switching the input signal 6 2 [SYSTEM DA YLIGHT VIEW] 7 4 [SYSTEM SELECT OR] 7 6 TTemperature indicator 157 [TEST PATTERN] 69, 126 button Remote control 25, 63 [TEXT CHANGE] 131 [TINT] 7 2 T roubleshooting 164 T wo window 177 Index
Index ENGLISH - 189 U[UNIFORMITY] 103 Upgrade Kit 178 V button Projector body 27, 62 Remote control 25, 62 W[WAVEFORM MONITOR] 105 [WHITE GAIN] 7 4 Z[ZOOM] 7 9 button Remote control 25, 58
Panasonic System Communications Company of North America 5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490 TEL: (877) 803 - 8492 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 TEL: (905) 624 - 5010 Panasonic Corporation Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2013 W0613NS3044 -YI Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.