Panasonic DLP Projector PT-DZ870U PT-DW830U PT-DX100U Operating Instructions

							Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[DISABLE] Disables the No signal shut-off function.
[10MIN.] - [90MIN.] Allows you to set in ten minutes intervals.
[REMOTE2 MODE]
You can set the  terminal.
1) Press as to select [REMOTE2 MODE].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[DEFAULT] The pin assignment of the  terminal is used by the factory default setting of the 
projector.
[USER] Used to change the setting of the  terminal.
[L6500 SERIES] The setting of  terminal is used for the L6500 series compatibility .
 fWhen [USER] is selected, proceed to Step  3)

.
3) Press the  button.
4)  
Press 
 as to select one from [PIN2] to [PIN8], and press  qw to switch the setting.
[FUNCTION BUTTON]
Set the functions of the  button on the remote control.
1) Press as to select [FUNCTION BUTTON].
2)  
Press the  button.
 f The  [FUNCTION BUTTON] screen is displayed.
3) Press  as to select a function.
[DISABLE] Disables the  button.
[P IN P] Switches the [P IN P] setting to [OFF], [USER1], [USER2], or [USER3]. ( x
  page   124)
[SUB MEMORY] Displays the sub memory list. ( x
  page   129)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (x
  page   76)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. ( x
  page   74)
[FREEZE] Temporarily pauses the image. ( x
  page   105)
[WAVEFORM MONITOR] Displays the waveform of the input signal. ( x
  page   105)
[LEFT/RIGHT SWAP] Switches the flip horizontal settings. ( x
  page   92)
[ASPECT] Switches the aspect setting. (x
  page   78)
4) Press the  button.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector .
Setting the time zone
1) Press as to select [DATE AND TIME].
2)  
Press the  button.
 f The  [DATE AND TIME] screen is displayed.
3) Press  as to select [TIME ZONE].
4)  
Press 
 qw to switch [TIME ZONE].   
						

							Chapter 4 Settings — [PROJECTOR SETUP] menu
122 - ENGLISH
Setting the date and time manually
1) Press as to select [DATE AND TIME].
2)  
Press the  button.
 f The  [DATE AND TIME] screen is displayed.
3) Press  as to select [ADJUST CLOCK].
4)  
Press the  button.
 f The  [ADJUST CLOCK] screen is displayed.
5) Press  as to select an item, and press qw to set the local date and time.
6)  
Press 
 as to select [APPLY], and press the  button.
 fThe setting of the date and time will be completed.
Setting the date and time automatically
1) Press  as to select [DATE AND TIME].
2)  
Press the  button.
 f The  [DATE AND TIME] screen is displayed.
3) Press  as to select [ADJUST CLOCK].
4)  
Press the  button.
 f The  [ADJUST CLOCK] screen is displayed.
5) Press  as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6)  
Press 
 as to select [APPLY], and press the  button.
 fThe setting of the date and time will be completed.
Note
 fTo set the date and time automatically, the projector must be connected to the network. fIf synchronization with the NTP
 server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned 
[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
 f Access the projector via a web browser to set the NTP

 server. Refer to “[Adjust clock] page” (x   page   146) for details.
[LENS CALIBRATION]
Automatically set the lens shift limit values and home position for the projector.
1) Press as to select [LENS CALIBRATION].
2)  
Press the  button.
 f The confirmation screen is displayed.
3) Press  qw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
 fThe lens moves up, down, left, and right to automatically set the lens shift limit values and home position.
 fThe lens stops to complete the calibration.
Note
 f[PROGRESS] is displayed on the menu during lens calibration. Cannot cancel mid-operation. fWhen lens calibration executes correctly
, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly .
[SAVE ALL USER DATA]
Save the various setting values as a backup in the built-in memory of the projector.
1) Press as to select [SAVE ALL USER DATA].
2)  
Press the  button.
 f The  [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the  button.   
						

							Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 123
4) When the confirmation screen is displayed, press qw  to select [OK], and press the  button.
 f[PROGRESS] is displayed while saving data.
Note
 fData set from the computer application is not included in [ALL  USER DATA].
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory of the projector .
1) Press as to select [LOAD ALL USER DATA].
2)  
Press the  button.
 f The  [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the  button.
4)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f The projector will go into the standby status to reflect the setting values when [LOAD  ALL  USER DATA] is executed. fData registered from a computer is not included in [ALL
 USER DATA].
[INITIALIZE]
Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE].
2)  
Press the  button.
 f The  [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the  button.
 fThe  [INITIALIZE]  screen is displayed.
4) Press as to select an item to initialize.
[ALL USER DATA] Returns all setting items including [REGISTERED SIGNAL], [NETWORK SETUP], [E-mail set up], 
and [USER LOGO] to the factory default settings.
The projector will go into the standby status to reflect the setting values.
[REGISTERED SIGNAL] Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the 
registered signal” (
x
  page   127).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
5) Press the  button.
6)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
[SERVICE PASSWORD]
This function is used by a service person.   
						

							Chapter 4 Settings — [P IN P] menu
124 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously .
1) Press as to select [P IN P MODE].
2)  
Press the  button.
 f The  [P IN P MODE] screen is displayed.
3) Press  as to select a function.
[OFF] P IN P function is not used.
[USER1]
The items set in “Setting P IN P function” (x
  page   124) are used in P IN P function.
[USER2]
[USER3]
4) Press the  button.
Setting P IN P function
P IN P function settings can be saved to [USER1], [USER2], and [USER3].
1) Press 
as to select [P IN P MODE].
2)  
Press the  button.
 f The  [P IN P MODE] screen is displayed.
3) Press  as to select the desired mode from [USER1], [USER2], and [USER3], and pres\
s the  
button.
4)
 
Press 
 as to select [MAIN WINDOW] or [SUB WINDOW], and press the  button.
5)
 
Press 
 as to select the input terminal to be displayed in the window, and press the  button.
6)
 
Press 
 as to select an item.
[SIZE] Set the window display size between 10   % and 100   %.
[POSITION] Set the display position of the window within the screen.
[CLOCK PHASE] When the sub window is input from the  terminal or the  terminal and a 
flickering image or smeared outline appears, set between 0 and +31.
7) If [SIZE] is selected in Step 6), press the  button.
 f
The sub-menu is displayed.
8) Press  as to select an item.
9)  
Press 
 qw to make adjustment, and press the  button.
10)
 
If [POSITION] is selected in Step 6), press the  button.
1

1)  
Press 
 asqw to adjust the position, and press the  button.
12)
 
If [CLOCK PHASE] is selected in Step 6), press  qw

 to make adjustment.
13)
 
Press 
 as to select [FRAME LOCK].   
						

							Chapter 4 Settings — [P IN P] menu
ENGLISH - 125
14) Press qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
15) Press as to select [TYPE].
16)  
Press 
 qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority.
Note
 fThe P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display 
combination list” ( x
  page   177) for details.
 fThe main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA], and [COLOR 
TEMPERA

TURE].
 fOn the main screen (when no menu is displayed), press  qw

 to switch the sizes and positions of the main window and sub window while P  
IN P is operating.
 f When [FRAME RESPONSE] is set to other than [NORMAL], [P

 IN P] cannot be set.
 f3D images cannot be displayed in P

 IN P.
 fThe P

 IN P state continues while the P IN P function is used, even if 3D images of the simultaneous system are displayed.
 fThe combination of DIGIT

AL LINK and other input cannot be displayed in P IN P.   
						

							Chapter 4 Settings — [TEST PATTERN] menu
126 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fPress 

qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various 
adjustments.
1) Press  qw to switch the [TEST PATTERN] item.
 fThe items will switch each time you press the button.
Menu screen + All white
Displays test patterns with the menu screen. Select a test pattern so that it is easy to make various 
adjustments.
Menu screen + All black
Menu screen + Window
Menu screen + Window  (inversion)
Menu screen + Color bar  (vertical)
Menu screen + Color bar  (horizontal)
Menu screen + 16:9/4:3  aspect frame
Menu screen + Focus
Menu screen + Entry screen Displays the menu screen and input signal.
Built-in test patterns are not displayed.
Note
 f
Press the  button on the remote control while the test pattern is displayed to hide the menu screen.
Changing color or a focus test pattern
When the “Menu Screen + Focus” test pattern is displayed, the color can be changed.
1) Press  qw to select the “Menu Screen + Focus” test pattern.
2)  
Press the  button.
 f The  [TEST PATTERN COLOR] screen is displayed.
3) Press  as to select a color, and press the  button.
 fThe test pattern color changed to the color selected.
Note
 fThe test pattern color settings return to [WHITE] when the projector is switched of f. fColors of the test patterns other than focus test patterns cannot be changed.   
						

							Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 127
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   129).
Registering new signals
After a new signal is input and the  button on the remote control or the control panel is pressed, the registration is completed and the 
[MAIN MENU] screen is displayed.
Note
 fUp to 96 signals, including sub memories, can be registered to the projector . fThere are 12 pages (eight memories of 
A through L, with eight memories possible on each page) for memory numbers, and the signal is 
registered to the lowest number that is available. If there is no available memory number it will be overwritten from the oldest signal.
 f The names to be registered are automatically determined by the input signals and memory numbers. fIf a menu is being displayed, the new signals will be registered at the instant they are input.
Renaming the registered signal
Registered signals can be renamed.
1) Press  asqw to select the signal of which name is to be changed.
2)  
Press the  button.
 f The  [REGISTERED SIGNAL STATUS] screen is displayed.
 fThe memory number

, input terminal, input signal name, frequency, synch polarity, etc., are displayed.
 fPress the  button to return to the 

[SIGNAL LIST] screen.
3) Press the  button.
 fThe  [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press  as to select [SIGNAL NAME CHANGE].
5)  
Press the  button.
 f The  [SIGNAL NAME CHANGE] screen is displayed.
6) Press  asqw to select the text, and press the  button to enter the text.
7)  
After the name is changed, press 
 asqw to select [OK], and press the  button.
 fThe registration is completed and the  [REGISTERED SIGNAL  SETUP] screen returns.
 fWhen pressing  asqw to select [CANCEL] and pressing the  button, the changed signal name will not be registered and 
an automatically registered signal name will be used.
Deleting the registered signal
Registered signals can be deleted.
1) Press  asqw to select the signal to delete.   
						

							Chapter 4 Settings — [SIGNAL LIST] menu
128 - ENGLISH
2) Press the  button on the remote control.
 fThe  [REGISTERED SIGNAL DELETE] screen is displayed.
 fT

o cancel the deletion, press the  button to return to the  [REGISTERED SIGNAL LIST] screen.
3) Press the  button.
 fThe selected signal will be deleted.
Note
 fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to protect.
2)  
Press the  button.
 f The  [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the  button.
 fThe  [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press  as to select [LOCK].
5)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] The signal is not protected.
[ON] The signal is protected.
Note
 fWhen [LOCK] is set to [ON], signal deletion, image adjustment, and automatic setup are not available.  T o perform these operations, set 
[LOCK] to [OFF].
 f A

 signal can be registered to the sub memory even if it is protected.
 fEven a protected signal will be deleted if [INITIALIZE] is executed.
Expanding signal lock-in range
1) Press  asqw to select the signal to set.
2)  
Press the  button.
 f The  [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the  button.
 fThe  [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press  as to select [LOCK-IN RANGE].
5)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[NARROW] Select in most cases.
[WIDE] Widens the lock-in range.
Note
 fSwitch the range that determines that a signal to be input is the same signal that is already registered. fT
o prioritize the determination that it is the same signal that is already registered, set to the [WIDE] setting.
 f Use in cases such as when the synchronizing frequency of a signal to be input has changed slightly , or multiple signal lists are registered. fCan only be used when a signal is input from the  terminal,  terminal,  terminal,  terminal, or 
 terminal.
 fWhen [WIDE] is set, the image may appear distorted because a signal is determined to be the same signal even if a synchronizing 
frequency changes slightly

.
 fWhen a signal to be input corresponds to multiple signals set in [WIDE], a registered signal with a high memory number receives priority . 
Example: a signal to be input that corresponds to memory numbers  A2, 

A4, and B1 will be determined to be B1.
 fWhen a registration signal is deleted, the settings are also deleted. fIn an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when the 
setting is set to [WIDE].   
						

							Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 129
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by 
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same 
synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such as the screen aspect ratio and 
data adjusted in the [PICTURE] item ([CONTRAST], [BRIGHTNESS], etc.).
Registering to the sub memory
1) Press qw on the normal screen (when the menu is not displayed).
 fThe sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step  3) .
 fA

 list of sub memories registered to the signal currently input is displayed.
 fBy selecting [SUB MEMOR

Y] in the [PROJECTOR SETUP] menu → [FUNCTION BUTTON], the  button on the remote 
control can be used instead of  qw.
2) Press asqw to select the sub memory number to register in [SUB MEMORY LIST].
3)  
Press the  button.
 f The  [SIGNAL NAME CHANGE] screen is displayed.
4) Press  asqw to select [OK], and press the  button.
 fTo rename the registered signal, follow the procedure in Steps  6) and 7) in “Renaming the registered signal” (x   page   127).
Switching to the sub memory
1) Press qw on the normal screen (when the menu is not displayed).
 fA list of sub memories registered to the signal currently input is displayed.
2) Press  asqw to select the signal to switch in [SUB MEMORY LIST].
3)  
Press the  button.
 f This switches to the signal selected in Step  2) .
Deleting the sub memory
1) Press qw on the normal screen (when the menu is not displayed).
 fThe  [SUB MEMORY LIST]  screen is displayed.
2) Press asqw to select the sub memory to delete, and press the  button on the remote 
control.
 f The  [REGISTERED SIGNAL DELETE] screen is displayed.
 fT

o cancel the deletion, press the  button to return to the  [SUB MEMORY LIST] screen.
3) Press the  button.
 fThe selected sub memory will be deleted.   
						

							Chapter 4 Settings — [SECURITY] menu
130 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset password and 
then continue operations of the [SECURITY] menu.
 fWhen the password has been changed previously

, enter the changed password, and press the  button.
Note
 fThe entered password is displayed with*marks on the screen. fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be 
restricted to the power standby < v> button, the  button, and the  (, , and ) buttons.
1) Press as to select [SECURITY PASSWORD].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Disables the security password entry.
[ON] Enables the security password entry.
Note
 fIn the factory default setting of after [ALL  USER DATA] in [INITIALIZE] (x   page   123) is executed, the [SECURITY PASSWORD] setting is 
set to [OFF].
 f Change the password periodically that is hard to guess. fThe security password is enabled after setting [SECURITY

 PASSWORD] to [ON] and turning the  switch to .
[SECURITY PASSWORD CHANGE]
Change the security password.
1) Press as to select [SECURITY PASSWORD CHANGE].
2)  
Press the  button.
 f The  [SECURITY PASSWORD CHANGE] screen is displayed.
3) Press  asqw and the number ( - ) buttons to set the password.
 fUp to eight button operations can be set.
4) Press the  button.
5)  
Re-enter the password for the confirmation.
6)

 
Press the  button.
Note
 f The entered password is displayed with*marks on the screen.