Panasonic DLP Projector PT-DZ680U PT-DZ680UL Operating Instructions
Here you can view all the pages of manual Panasonic DLP Projector PT-DZ680U PT-DZ680UL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
ENGLISH - 71
Chapter 4 Settings — [DISPLAY OPTION] menu
Note
r
f The startup logo will disappear in approximately 15 seconds.
r
f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[SHUTTER SETTING]
Set the opening and closing status of the shutter for when projection begins by switching on the projector
, and for when the projector is
switched off.
To set [STARTUP]
1) Press as to select [SHUTTER SETTING].
2) Press the button.
r
f The
[SHUTTER...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-70.png "Page 71
ENGLISH - 71
Chapter 4 Settings — [DISPLAY OPTION] menu
Note
r
f The startup logo will disappear in approximately 15 seconds.
r
f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[SHUTTER SETTING]
Set the opening and closing status of the shutter for when projection begins by switching on the projector
, and for when the projector is
switched off.
To set [STARTUP]
1) Press as to select [SHUTTER SETTING].
2) Press the button.
r
f The
[SHUTTER...")
ENGLISH - 71 Chapter 4 Settings — [DISPLAY OPTION] menu Note r f The startup logo will disappear in approximately 15 seconds. r f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required. [SHUTTER SETTING] Set the opening and closing status of the shutter for when projection begins by switching on the projector , and for when the projector is switched off. To set [STARTUP] 1) Press as to select [SHUTTER SETTING]. 2) Press the button. r f The [SHUTTER...
Page 72
![Page 72
72 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
r
r Setting the two window display
[VIDEO]
Displays images of [VIDEO] input on the right screen (Input B).
[S-VIDEO] Displays images of [S-VIDEO] input on the right screen (Input B).
[RGB1] Displays images of [RGB1] input on the right screen (Input B).
[RGB2] Displays images of [RGB2] input on the right screen (Input B).
[DVI-D] Displays images of [DVI-D] input on the right screen (Input B).
[HDMI] Displays images of [HDMI] input on the right screen...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-71.png "Page 72
72 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
r
r Setting the two window display
[VIDEO]
Displays images of [VIDEO] input on the right screen (Input B).
[S-VIDEO] Displays images of [S-VIDEO] input on the right screen (Input B).
[RGB1] Displays images of [RGB1] input on the right screen (Input B).
[RGB2] Displays images of [RGB2] input on the right screen (Input B).
[DVI-D] Displays images of [DVI-D] input on the right screen (Input B).
[HDMI] Displays images of [HDMI] input on the right screen...")
72 - ENGLISH Chapter 4 Settings — [DISPLAY OPTION] menu r r Setting the two window display [VIDEO] Displays images of [VIDEO] input on the right screen (Input B). [S-VIDEO] Displays images of [S-VIDEO] input on the right screen (Input B). [RGB1] Displays images of [RGB1] input on the right screen (Input B). [RGB2] Displays images of [RGB2] input on the right screen (Input B). [DVI-D] Displays images of [DVI-D] input on the right screen (Input B). [HDMI] Displays images of [HDMI] input on the right screen...
Page 73
![Page 73
ENGLISH - 73
Chapter 4 Settings — [PROJECTOR SETUP] menu
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x page 49) for the operation of the menu screen.
r
f After selecting the item, press
asqw to set.
[PROJECTOR ID]
The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous
control or individual control via one remote control....](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-72.png "Page 73
ENGLISH - 73
Chapter 4 Settings — [PROJECTOR SETUP] menu
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x page 49) for the operation of the menu screen.
r
f After selecting the item, press
asqw to set.
[PROJECTOR ID]
The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous
control or individual control via one remote control....")
ENGLISH - 73 Chapter 4 Settings — [PROJECTOR SETUP] menu [PROJECTOR SETUP] menu Select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 49) for the operation of the menu screen. r f After selecting the item, press asqw to set. [PROJECTOR ID] The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via one remote control....
Page 74
![Page 74
74 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[COOLING CONDITION]
Change the fan control depending on the direction of projection.
Set [COOLING CONDITION] correctly in accordance with the direction of projection referring to the following figure. It may shorten the life of
the lamp if used in incorrect setting.
30°
30° 30°
30°
[
VER
TICAL UP SETTING]
[FLOOR SETTING] [CEILING SETTING]
[VERTICAL DOWN SETTIN G]
Projection direction
1) Press as to select [COOLING CONDITION].
2) Press the...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-73.png "Page 74
74 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[COOLING CONDITION]
Change the fan control depending on the direction of projection.
Set [COOLING CONDITION] correctly in accordance with the direction of projection referring to the following figure. It may shorten the life of
the lamp if used in incorrect setting.
30°
30° 30°
30°
[
VER
TICAL UP SETTING]
[FLOOR SETTING] [CEILING SETTING]
[VERTICAL DOWN SETTIN G]
Projection direction
1) Press as to select [COOLING CONDITION].
2) Press the...")
74 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [COOLING CONDITION] Change the fan control depending on the direction of projection. Set [COOLING CONDITION] correctly in accordance with the direction of projection referring to the following figure. It may shorten the life of the lamp if used in incorrect setting. 30° 30° 30° 30° [ VER TICAL UP SETTING] [FLOOR SETTING] [CEILING SETTING] [VERTICAL DOWN SETTIN G] Projection direction 1) Press as to select [COOLING CONDITION]. 2) Press the...
Page 75
![Page 75
ENGLISH - 75
Chapter 4 Settings — [PROJECTOR SETUP] menu
operating time of either of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]), only the other lamp will light. However , if
both lamps do not light, or the cumulative operating time of both of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]),
the projector will go into standby.
r
f The font colors of the items indicate the status.
Green
→ Current setting
Yellow → Current setting (when there is a lamp that cannot...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-74.png "Page 75
ENGLISH - 75
Chapter 4 Settings — [PROJECTOR SETUP] menu
operating time of either of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]), only the other lamp will light. However , if
both lamps do not light, or the cumulative operating time of both of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]),
the projector will go into standby.
r
f The font colors of the items indicate the status.
Green
→ Current setting
Yellow → Current setting (when there is a lamp that cannot...")
ENGLISH - 75 Chapter 4 Settings — [PROJECTOR SETUP] menu operating time of either of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]), only the other lamp will light. However , if both lamps do not light, or the cumulative operating time of both of them exceeds 2 500 hours (when [LAMP POWER] is set to [NORMAL]), the projector will go into standby. r f The font colors of the items indicate the status. Green → Current setting Yellow → Current setting (when there is a lamp that cannot...
Page 76
![Page 76
76 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[ECO] Set when high luminance is not required.
Note
r
f When [ECO] is set, the power consumption and operation sound can be reduced while the lamp life can be increased.
[STANDBY MODE]
Set the power consumption during the standby.
1) Press as to select [STANDBY MODE].2) Press qw to switch [STANDBY MODE].
r
f The setting will change between [NORMAL] and [ECO] each
time you press the button.
r
r [STANDBY MODE]
[NORMAL]
Normally use this setting....](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-75.png "Page 76
76 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[ECO] Set when high luminance is not required.
Note
r
f When [ECO] is set, the power consumption and operation sound can be reduced while the lamp life can be increased.
[STANDBY MODE]
Set the power consumption during the standby.
1) Press as to select [STANDBY MODE].2) Press qw to switch [STANDBY MODE].
r
f The setting will change between [NORMAL] and [ECO] each
time you press the button.
r
r [STANDBY MODE]
[NORMAL]
Normally use this setting....")
76 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [ECO] Set when high luminance is not required. Note r f When [ECO] is set, the power consumption and operation sound can be reduced while the lamp life can be increased. [STANDBY MODE] Set the power consumption during the standby. 1) Press as to select [STANDBY MODE].2) Press qw to switch [STANDBY MODE]. r f The setting will change between [NORMAL] and [ECO] each time you press the button. r r [STANDBY MODE] [NORMAL] Normally use this setting....
Page 77
![Page 77
ENGLISH - 77
Chapter 4 Settings — [PROJECTOR SETUP] menu
7) Press qw to select hour and minute, and press
as or the number ( to ) buttons to set
a time, and press the button.
8) Press as to select [COMMAND].
9) Press qw to switch [COMMAND].
r
f The setting will change among [POWER ON], [STANDBY],
[SHUTTER]*, [INPUT]*, [LAMP SELECT]*, [LAMP POWER]* and
[SIDE BY SIDE]* each time you press the button.
* The details set in step 11 ) are displayed.
10) Press the button.
r
f The
[COMMAND] detailed...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-76.png "Page 77
ENGLISH - 77
Chapter 4 Settings — [PROJECTOR SETUP] menu
7) Press qw to select hour and minute, and press
as or the number ( to ) buttons to set
a time, and press the button.
8) Press as to select [COMMAND].
9) Press qw to switch [COMMAND].
r
f The setting will change among [POWER ON], [STANDBY],
[SHUTTER]*, [INPUT]*, [LAMP SELECT]*, [LAMP POWER]* and
[SIDE BY SIDE]* each time you press the button.
* The details set in step 11 ) are displayed.
10) Press the button.
r
f The
[COMMAND] detailed...")
ENGLISH - 77 Chapter 4 Settings — [PROJECTOR SETUP] menu 7) Press qw to select hour and minute, and press as or the number ( to ) buttons to set a time, and press the button. 8) Press as to select [COMMAND]. 9) Press qw to switch [COMMAND]. r f The setting will change among [POWER ON], [STANDBY], [SHUTTER]*, [INPUT]*, [LAMP SELECT]*, [LAMP POWER]* and [SIDE BY SIDE]* each time you press the button. * The details set in step 11 ) are displayed. 10) Press the button. r f The [COMMAND] detailed...
Page 78
![Page 78
78 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[DVI-D] Sets the input to be projected when the projector is switched on to DVI-D.
[HDMI] Sets the input to be projected when the projector is switched on to HDMI.
[RS-232C]
Set the communication conditions of the / terminal.
To set the communication condition of the terminal
1) Press as to select [RS-232C].
2) Press the button.
r
f The
[RS-232C] screen is displayed.
3) Press as to select [(IN) BAUDRATE].
4) Press qw to switch [(IN) BAUDRATE]....](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-77.png "Page 78
78 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[DVI-D] Sets the input to be projected when the projector is switched on to DVI-D.
[HDMI] Sets the input to be projected when the projector is switched on to HDMI.
[RS-232C]
Set the communication conditions of the / terminal.
To set the communication condition of the terminal
1) Press as to select [RS-232C].
2) Press the button.
r
f The
[RS-232C] screen is displayed.
3) Press as to select [(IN) BAUDRATE].
4) Press qw to switch [(IN) BAUDRATE]....")
78 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [DVI-D] Sets the input to be projected when the projector is switched on to DVI-D. [HDMI] Sets the input to be projected when the projector is switched on to HDMI. [RS-232C] Set the communication conditions of the / terminal. To set the communication condition of the terminal 1) Press as to select [RS-232C]. 2) Press the button. r f The [RS-232C] screen is displayed. 3) Press as to select [(IN) BAUDRATE]. 4) Press qw to switch [(IN) BAUDRATE]....
Page 79
![Page 79
ENGLISH - 79
Chapter 4 Settings — [PROJECTOR SETUP] menu
6) Press qw to switch [GROUP].
r
f The setting will change among [A] to [Z] each time you press
the button.
7) Press as to select [RESPONSE(ID GROUP)].
8) Press qw to switch [RESPONSE(ID GROUP)].
r
f The setting will change between [ON] and [OFF] each time you
press the button.
r
r [RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
r
r [GROUP]
[A] - [Z] Controls...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-78.png "Page 79
ENGLISH - 79
Chapter 4 Settings — [PROJECTOR SETUP] menu
6) Press qw to switch [GROUP].
r
f The setting will change among [A] to [Z] each time you press
the button.
7) Press as to select [RESPONSE(ID GROUP)].
8) Press qw to switch [RESPONSE(ID GROUP)].
r
f The setting will change between [ON] and [OFF] each time you
press the button.
r
r [RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
r
r [GROUP]
[A] - [Z] Controls...")
ENGLISH - 79 Chapter 4 Settings — [PROJECTOR SETUP] menu 6) Press qw to switch [GROUP]. r f The setting will change among [A] to [Z] each time you press the button. 7) Press as to select [RESPONSE(ID GROUP)]. 8) Press qw to switch [RESPONSE(ID GROUP)]. r f The setting will change between [ON] and [OFF] each time you press the button. r r [RESPONSE(ID ALL)] [ON] Returns the response when the ID setting is ALL. [OFF] Does not return the response when the ID setting is ALL. r r [GROUP] [A] - [Z] Controls...
Page 80
![Page 80
80 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the firmware of the projector.
[SUB VERSION] Displays the sub version of the firmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] Displays the number...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-79.png "Page 80
80 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the firmware of the projector.
[SUB VERSION] Displays the sub version of the firmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] Displays the number...")
80 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1. [LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2. [MAIN VERSION] Displays the main version of the firmware of the projector. [SUB VERSION] Displays the sub version of the firmware of the projector. [NETWORK VERSION] Displays the network version of the projector. [ON COUNT] [POWER ON TIMES] Displays the number of times the power is turned on. [LAMP1 ON] Displays the number...