Panasonic DLP Projector PT-DZ680U PT-DZ680UL Operating Instructions
Here you can view all the pages of manual Panasonic DLP Projector PT-DZ680U PT-DZ680UL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
ENGLISH - 101
Chapter 4 Settings — [NETWORK] menu
Contents of mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : DZ680
Serial No : SH1234567
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPERATURE Over [ 45 degC / 113 degF ]
ERROR [ OFF ]
LAMP1...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-100.png "Page 101
ENGLISH - 101
Chapter 4 Settings — [NETWORK] menu
Contents of mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : DZ680
Serial No : SH1234567
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPERATURE Over [ 45 degC / 113 degF ]
ERROR [ OFF ]
LAMP1...")
ENGLISH - 101 Chapter 4 Settings — [NETWORK] menu Contents of mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector Type : DZ680 Serial No : SH1234567 ----- E-mail setup data ----- TEMPERATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEMPERATURE Over [ 45 degC / 113 degF ] ERROR [ OFF ] LAMP1...
Page 102
![Page 102
102 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : DZ680
Serial No : SH1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP1 REMAIN TIME [ OK ]
LAMP2 REMAIN TIME [ OK ]
LAMP1...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-101.png "Page 102
102 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : DZ680
Serial No : SH1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP1 REMAIN TIME [ OK ]
LAMP2 REMAIN TIME [ OK ]
LAMP1...")
102 - ENGLISH Chapter 4 Settings — [NETWORK] menu Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(CONFIGURE) === Projector Type : DZ680 Serial No : SH1234567 ----- check system ----- MAIN CPU BUS [ OK ] FAN [ OK ] INTAKE AIR TEMPERATURE [ OK ] OPTICS MODULE TEMPERATURE [ OK ] AROUND LAMP TEMPERATURE [ OK ] LAMP1 REMAIN TIME [ OK ] LAMP2 REMAIN TIME [ OK ] LAMP1...
Page 103
![Page 103
ENGLISH - 103
Chapter 4 Settings — [NETWORK] menu
[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7)
1 [Account]
Displays the account to change.
2 [Current][User name]
Enter the user name before the change.
3 [Current][Password]
Enter the current password.
4 [New][User name]
Enter the desired new user name. (Up to 16 characters in single
byte) 5
[New][Password]
Enter the desired new password. (Up to 16 characters in single
byte)
6 [New][Password(Retype)]
Enter the desired new password again.
7...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-102.png "Page 103
ENGLISH - 103
Chapter 4 Settings — [NETWORK] menu
[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7)
1 [Account]
Displays the account to change.
2 [Current][User name]
Enter the user name before the change.
3 [Current][Password]
Enter the current password.
4 [New][User name]
Enter the desired new user name. (Up to 16 characters in single
byte) 5
[New][Password]
Enter the desired new password. (Up to 16 characters in single
byte)
6 [New][Password(Retype)]
Enter the desired new password again.
7...")
ENGLISH - 103 Chapter 4 Settings — [NETWORK] menu [Administrator] account (1) (2) (3) (4) (5) (6) (7) 1 [Account] Displays the account to change. 2 [Current][User name] Enter the user name before the change. 3 [Current][Password] Enter the current password. 4 [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) 5 [New][Password] Enter the desired new password. (Up to 16 characters in single byte) 6 [New][Password(Retype)] Enter the desired new password again. 7...
Page 104
![Page 104
104 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
(1)
(2)
(4) (3)
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte) 3
[Retype]
Enter the desired new password again.
4 [OK]
Determines the change of password.
Note
r
f To change the account of the administrator, you must enter the [Current] [User name] and [Password].
[CRESTRON...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-103.png "Page 104
104 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
(1)
(2)
(4) (3)
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte) 3
[Retype]
Enter the desired new password again.
4 [OK]
Determines the change of password.
Note
r
f To change the account of the administrator, you must enter the [Current] [User name] and [Password].
[CRESTRON...")
104 - ENGLISH Chapter 4 Settings — [NETWORK] menu [Change password] (For user rights) Only the change of password is enabled under the user rights. (1) (2) (4) (3) 1 [Old Password] Enter the current password. 2 [New Password] Enter the desired new password. (Up to 16 characters in single byte) 3 [Retype] Enter the desired new password again. 4 [OK] Determines the change of password. Note r f To change the account of the administrator, you must enter the [Current] [User name] and [Password]. [CRESTRON...
Page 105
![Page 105
ENGLISH - 105
Chapter 4 Settings — [NETWORK] menu
[Tools] page
Click [Tools] on the control page.
1
2
3
4
5
1 [Control System]
Set the information required for communicating with the
controller to be connected with the projector.
2 [User Password]
Set the user rights password for the RoomView control page.
3 [Admin Password]
Set the administrator rights password for the RoomView control
page.
4 Network Status
Displays the settings of wired LAN. [DHCP]
Displays the current setting.
[Ip Address]...](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-104.png "Page 105
ENGLISH - 105
Chapter 4 Settings — [NETWORK] menu
[Tools] page
Click [Tools] on the control page.
1
2
3
4
5
1 [Control System]
Set the information required for communicating with the
controller to be connected with the projector.
2 [User Password]
Set the user rights password for the RoomView control page.
3 [Admin Password]
Set the administrator rights password for the RoomView control
page.
4 Network Status
Displays the settings of wired LAN. [DHCP]
Displays the current setting.
[Ip Address]...")
ENGLISH - 105 Chapter 4 Settings — [NETWORK] menu [Tools] page Click [Tools] on the control page. 1 2 3 4 5 1 [Control System] Set the information required for communicating with the controller to be connected with the projector. 2 [User Password] Set the user rights password for the RoomView control page. 3 [Admin Password] Set the administrator rights password for the RoomView control page. 4 Network Status Displays the settings of wired LAN. [DHCP] Displays the current setting. [Ip Address]...
Page 106
![Page 106
106 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Help] page
Click [Help] on the control page.
The [Help Desk] window is displayed.
1
1 [Help Desk]
Messages can be sent to or received from an administrator who
uses Crestron RoomView.](http://img.usermanuals.tech/thumb/58/75775/w300_pt-dz680_en_om_d-105.png "Page 106
106 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Help] page
Click [Help] on the control page.
The [Help Desk] window is displayed.
1
1 [Help Desk]
Messages can be sent to or received from an administrator who
uses Crestron RoomView.")
106 - ENGLISH Chapter 4 Settings — [NETWORK] menu [Help] page Click [Help] on the control page. The [Help Desk] window is displayed. 1 1 [Help Desk] Messages can be sent to or received from an administrator who uses Crestron RoomView.
Page 107
ENGLISH - 107 Chapter 5 Maintenance This chapter describes inspection when there are problems, and maintenance methods.
Page 108
108 - ENGLISH Chapter 5 Maintenance — Lamp/Temperature/Filter indicators Lamp/Temperature/Filter indicators Managing the indicated problems If a problem should occur inside the projector, the lamp indicators // the temperature indicator and the filter indicator will inform you by lighting or flashing. Check the status of the indicators and manage the indicated problems as follows. Attention r f When switching off the projector to deal with problems, make sure to follow the procedure in “Switching off...
Page 109
ENGLISH - 109 Chapter 5 Maintenance — Lamp/Temperature/Filter indicators Temperature indicator Indicator status Lighting in red Flashing in red (1 time) Flashing in red (3 times) Status Warm-up status Internal temperature is high (warning)Internal temperature is high (standby warning) The cooling fan has stopped. Cause r f Did you turn on the power when the room temperature was about 0 °C (32 °F)? r f Is the air intake/exhaust port blocked? r f Is the room temperature high? r f Is the filter...
Page 110
110 - ENGLISH Chapter 5 Maintenance — Maintenance/replacement Maintenance/replacement Before maintaining/replacing the unit r f Make sure to turn off the power before maintaining or replacing the unit. ( x pages 39, 41) r f When switching off the projector, make sure to follow the procedures in “Switching off the projector” ( x page 41). Maintenance Outer case Wipe off dirt and dust with a soft, dry cloth. r f If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry...