Panasonic DLP Projector PT-DZ21KU PT-DS20KU PT-DW17KU Operating Instructions

[PICTURE] menu
ENGLISH - 71
Settings
▶■When using  terminal, 
 terminal (PT
-DZ21KU 
and PT-DS20KU only)
▶z Single link
During SDI1 input, select [AUTO], [480i YCBCR], [576i 
YC
BCR], [720/50p YPBPR], [720/60p YPBPR], [1035/60i 
YP
BPR], [1080/24p YPBPR], [1080/24sF YPBPR], 
[1080/25p YP
BPR], [1080/30p YPBPR], [1080/50i 
YP
BPR], [1080/60i YPBPR], [1080/50p YPBPR], 
[1080/60p YP
BPR], [1080/24p RGB], [1080/24sF 
RGB], [1080/25p RGB], [1080/30p RGB], [1080/50i 
RGB], or [1080/60i RGB].
During SDI2 input,...

[POSITION] menu
72 - ENGLISH
Settings
Select [POSITION] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 61) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[SHIFT]
You can move the image position vertically or 
horizontally if the image position projected on the 
screen is shifted even when the relative position of the 
projector and the screen is installed correctly.
1) Press 
▲▼ to select [SHIFT].
2)...

[POSITION] menu
ENGLISH - 73
Settings
▶■[16:9]
When standard signals*1 are input, the pictures are 
displayed with the aspect ratio converted to 16:9. 
When wide-screen signals
*2 are input, the pictures are 
displayed without changing the aspect ratio.
▶■ [4:3]
When standard signals*1 are input, the pictures are 
displayed without changing the aspect ratio. When 
wide-screen signals
*2 are input and [4:3] is selected in 
[SCREEN FORMAT], the pictures are displayed with 
the aspect ratio changed to 4:3....

[POSITION] menu
74 - ENGLISH
Settings
[CLOCK PHASE]
You can adjust to achieve an optimal image when 
there is a flickering image or smeared outlines.
1) Press ▲▼ to select [CLOCK PHASE].
2)  
Press  ◀▶ or the  button.
▶z
The  [CLOCK PHASE] individual adjustment 
screen is displayed.
3) Press  ◀▶ to adjust the level.
▶z
Adjustment value will change between [0] and 
[
31]. Adjust so that the amount of interference is 
at a minimum.
Note
 z Certain signals may not be adjustable.
 zOptimal value may not be...

[POSITION] menu
ENGLISH - 75
Settings
▶z[HORIZONT AL KEYSTONE]
▶z
[VERTICAL  BALANCE]
Adjust the setting according to the lens shift range 
in vertical direction.
▶z
[HORIZONT AL BALANCE]
Adjust the setting according to the lens shift range 
in horizontal direction.
▶■[CUR VED]
▶z
[LENS THROW RA TIO]
Set the throw ratio for the lens used.
▶z
[VERTICAL  KEYSTONE]
▶z
[HORIZONT AL KEYSTONE]
▶z
[VERTICAL  ARC]
▶z
[HORIZONT AL ARC]
▶z
[VERTICAL  BALANCE]
▶z
[HORIZONT AL BALANCE]
Note
 z
The menu or logo may...

[POSITION] menu
76 - ENGLISH
Settings
[KEYSTONE] (PT-DW17KU only)
You can correct the trapezoidal distortion that occurs 
when the projector is installed tilted or when the 
screen is tilted.
1) Press ▲▼ to select [KEYST
ONE].
2)  
Press the  button.
3)

 
Press  ▲▼ to select the item to adjust.
4)

 
Press  ◀▶ to adjust the level.
▶■[KEYST ONE]
▶■[SUB KEYST ONE]
▶■[LINEARITY]
Note
 z
The menu or logo may run of

f the screen 
when various adjustments are performed with 
[KEYSTONE].
 z V

arious...

[ADVANCED MENU]
ENGLISH - 77
Settings
Select [ADVANCED MENU] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 61) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance 
the picture quality by performing the cinema 
processing when the PAL (or the SECAM) 576i signal, 
the NTSC 480i, 1080/50i, and 1080/60i signals are 
input.
1) Press...

[ADVANCED MENU]
78 - ENGLISH
Settings
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when 
there is a flickering image or smeared outlines.
1) Press ▲▼ to select [INPUT 
RESOLUTION].
2)
 
Press the  button.
▶z The  [INPUT RESOLUTION]
 screen is 
displayed.
3) Press  ▲▼ to select [T
OTAL DOTS], 
[DISPLAY DOTS], [TOTAL LINES], or 
[DISPLAY LINES], and press  ◀▶ to 
adjust it.
▶z Values corresponding to the input signal are 
displayed automatically for each item. Change 
the displayed values...

[ADVANCED MENU]
ENGLISH - 79
Settings
▶■To display the adjustment marker
7) Press 
▲▼ to select [MARKER].
8)  
Press  ◀▶ to switch [ON].
▶z
A marker for image position adjustment is 
displayed. The position where the red and 
green lines overlap for the sets to join will be 
the optimal point.
Make sure to set the correction width for the 
sets to join as the same value. Optimal joining 
is not possible with the sets with different 
correction widths.
The optimal point \Ris the point where\R this line...

[ADVANCED MENU]
80 - ENGLISH
Settings
[FRAME RESPONSE]
Image processing is simplified when 1080/60i, 
1080/50i, and 1080/24sF signals are input to reduce 
image frame delay.
1) Press ▲▼ to select [FRAME 
RESPONSE].
2)
 
Press  ◀▶ to switch [FRAME 
RESPONSE].
▶z The setting will change as follows each time 
you press the button.
[NORMAL][FAST]
[NORMAL]
Standard setting.
[FAST] Set when the picture is displayed 
later than sound.
Note
 z When [FRAME RESPONSE] is set to [F

AST], 
picture quality...