Panasonic DLP Projector PT-DZ21KU PT-DS20KU PT-DW17KU Operating Instructions

[DISPLAY OPTION] menu
ENGLISH - 91
Settings
[AUTO SETUP]
You can set when adjusting a special signal or 
horizontally long (16:9, etc.) signal.
1) Press ▲▼ to select [AUT
O SETUP].
2)  
Press the  button.
▶z The  [AUTO SETUP] screen is displayed.
3) Press 
▲▼ to select an item.
▶■To set [MODE]
4) Select [MODE] in Step 3).
5)  
Press  ◀▶ to switch [MODE].
▶z
The setting will change as follows each time 
you press the button.
[DEFAULT][WIDE][USER]
[DEFAULT]
Standard setting.
[WIDE] Select when an image...

[DISPLAY OPTION] menu
92 - ENGLISH
Settings
[RGB IN] (supported during RGB 
signal input only)
Set to match the signal to input to the  
terminal.
1) Press  ▲▼ to select [RGB IN].
2)  
Press the  button.
▶z The  [RGB IN] screen is displayed.
3) Press 
▲▼ to select an item.
▶■To set [RGB1 INPUT SETTING]
4) Select [RGB1 INPUT SETTING] in Step 3).
5) Press 
◀▶ to switch [RGB1 INPUT 
SETTING].
▶z The setting will change as follows each time 
you press the button.
[RGB/YPBPR][Y/C]
[RGB/YPBPR] Select when...

[DISPLAY OPTION] menu
ENGLISH - 93
Settings
[HDMI IN]
Switch the setting when the projector is connected to 
an external device via an HDMI cable and the image 
is not projected correctly.
1) Press ▲▼ to select [HDMI IN].
2)  
Press the  button.
▶z The  [HDMI IN] screen is displayed.
3) Press 
◀▶ to switch [HDMI SIGNAL
 
LEVEL].
▶z The setting will change as follows each time 
you press the button.
[0-1023][64-940]
[0-1023] Select when the DVI-D terminal 
output of an external device (such 
as a...

[DISPLAY OPTION] menu
94 - ENGLISH
Settings
▶■To set [BIT DEPTH]
4) Select [BIT DEPTH] in Step 3).
5)  
Press  ◀▶ to switch [BIT DEPTH].
▶z
The setting will change as follows each time 
you press the button.
[AUTO][12-bit][10-bit]
[AUTO] Automatically select 12 bits or 10 
bits.
[12-bit] Fix to 12 bits.
[10-bit] Fix to 10 bits.
▶■To set [3G-SDI MAPPING]
4) Select [3G-SDI MAPPING] in Step 3).
5)  
Press  ◀▶ to switch [3G-SDI 
MAPPING].
▶z The setting will change as follows each time 
you press the...

[DISPLAY OPTION] menu
ENGLISH - 95
Settings
▶■[INPUT GUIDE]
Set display of the input terminal name, signal name 
and memory number currently selected in the position 
set by the [OSD POSITION].
 z
The setting will change as follows each time you 
press the button.
[ON][OFF]
▶■ [W ARNING MESSAGE]
You can set the display/hide of the warning message.
 z
The setting will change as follows each time you 
press the button.
[ON][OFF]
[BACK COLOR]
Set the color of the projected image when there is no 
signal...

[DISPLAY OPTION] menu
96 - ENGLISH
Settings
▶■To set [PC CORRECTION]
To use the [PC CORRECTION] function, an optional 
upgrade kit (Model No.: ET-UK20) is required. To 
purchase the product, consult your dealer.
4) Select [PC CORRECTION] in Step 3).
5)  
Press  ◀▶ to switch.
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
[ON]*1Use a computer to correct the 
brightness and color unevenness of 
the entire screen.
[OFF] A computer cannot be used to 
correct.
*1: Advanced...

[DISPLAY OPTION] menu
ENGLISH - 97
Settings
2) Press ◀▶ to switch [W
AVEFORM 
MONITOR].
▶z The setting will change as follows each time 
you press the button.
[OFF][ON]
3) Press the  button two times to 
clear
.
4)
 
Press  ▲▼ to select any horizontal 
line.
▶z Items switch as in the following diagram 
each time the  is pressed while the 
waveform monitor is displayed.
“Select line (luminance)”“Select line (red)”
“Select line (blue)”“Select line (green)”
Note
 z T

he [FUNCTION BUTTON] (
 page 110) can...

[DISPLAY OPTION] menu
98 - ENGLISH
Settings
[CUT OFF]
Each red, green and blue color component can be 
removed.
1) Press ▲▼ to select [CUT OFF].
2)  
Press the  button.
▶z The  [CUT OFF] screen is displayed.
3) Press 
▲▼ to select [RED], [GREEN], 
or [BLUE].
4)
 
Press  ◀▶ to switch.
▶z
The setting will change as follows each time 
you press the button.
[OFF][ON]
[OFF]
Disables cutoff.
[ON] Enables cutoff.
Note
 z When input is switched or a signal is switched, the 
cutof

f setting returns to its...

[PROJECTOR SETUP] menu
ENGLISH - 99
Settings
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 61) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[PROJECTOR ID]
The projector has an ID number setting function that 
can be used when multiple projectors are used side 
by side to enable simultaneous control or individual 
control via one remote control.
1) Press...

[PROJECTOR SETUP] menu
100 - ENGLISH
Settings
[COOLING CONDITION]
Change the fan control depending on the direction of 
projection.
Set [COOLING CONDITION] correctly in accordance with 
the direction of projection referencing the following figure. It 
may shorten the life of the lamp if used in incorrect setting.
1) Press ▲▼ to select [COOLING 
CONDITION].
2)
 
Press the  button.
▶zThe  [COOLING CONDITION]  screen is displayed.
3) Press ▲▼ to select a cooling condition.

[VERTICAL UP 
SETTING]
[FLOOR...