Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

ENGLISH - 61
Chapter 4 Settings — [POSITION] menu
r
r [ASPECT]
[DEFAULT]
Pictures are displayed without changing the aspect ratio of the input si\
gnals.
[VID AUTO] The projector identifies the video ID (VID) embedded in the image signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 
VIDEO/S-VIDEO 
(NTSC)
 signals.
[S1 AUTO] The projector identifies the S1 signal, and displays the image by automatically switching the screen sizes...

62 - ENGLISH
Chapter 4 Settings — [POSITION] menu
Note
r
f When [ASPECT] is set to [THROUGH], [ZOOM] is not displayed.
When [ASPECT] is set to [DEFAULT]
1) Press as to select [ZOOM].
2) Press the  button.
r
f The 
[ZOOM]  screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch [MODE].
5) Press as to select [INTERLOCKED].
6) Press qw to switch [INTERLOCKED].
7) Press as to select [VERTICAL] or 
[HORIZONTAL].
r
f Select 
[BOTH]  when [ON] is selected.
8) Press qw to adjust.
r
r [MODE]...

ENGLISH - 63
Chapter 4 Settings — [POSITION] menu
[KEYSTONE]
You can correct the trapezoidal distortion that occurs when the projector\
 is installed tilted or when the screen is tilted.
1) Press as to select [KEYSTONE].
2) Press the  button.
r
f The 
[KEYSTONE]  screen is displayed.
3) Press as to select the item to adjust.
4) Press qw to adjust.
r
r Adjustment details
[KEYSTONE]
[SUB KEYSTONE]
[LINEARITY]
Note
r
f The menu or logo may run off the screen when various adjustments are performed with...

64 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
[ADVANCED MENU] menu
Select [ADVANCED MENU] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to adjust.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the picture quality by performing the cinema processing when the PAL (or the SECAM) 
576i signal, the NTSC 480i, 1080/50i, and...

ENGLISH - 65
Chapter 4 Settings — [ADVANCED MENU] menu
Blanking correction ItemOperation Adjustment Range
Left side of the screen [LEFT]Press 
w. The blanking zone 
moves to the right.
PT-DW740E: 0 to 639
PT-DX810E: 0 to 511
Press 
q. The blanking zone 
moves to the left.
Right side of the  screen [RIGHT]Press 
q. The blanking zone 
moves to the right.
Press 
w. The blanking zone 
moves to the left.
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when there is a flickering image or smeared...

66 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
7) Press qw to switch [ON].
r
f A marker for image position adjustment is displayed.
8) Press as to select [START] or [WIDTH], 
then press qw to adjust starting point and 
correction width.
r
f The green line is the starting point of edge blending adjusted 
with [START]. The red line is the ending point of edge blending 
adjusted with [WIDTH]. The position where the red and green 
lines overlap for the sets to join will be the optimal point.
Make...

ENGLISH - 67
Chapter 4 Settings — [DISPLAY LANGUAGE] menu
[DISPLAY LANGUAGE] menu
Select [DISPLAY LANGUAGE] from the main menu, and display the sub-menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f Press 
as to select a language, and press the  button to set.
Changing the display language
You can select the language of the on-screen display.
Ô
ÔŠ 
DISPLA Y LANGUAGE
r
f Various menus, settings, adjustment screens, control button names, etc., are...

68 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
[DISPLAY OPTION] menu
Select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to set.
[COLOR MATCHING]
You can correct the color difference between the sets when multiple sets are to be used simultaneousl\
y.
To adjust the color matching as desired
1) Press as to select [COLOR MATCHING].
2)...

ENGLISH - 69
Chapter 4 Settings — [DISPLAY OPTION] menu
5) Press the  button.
r
f The 
[MEASURED DATA]  screen is displayed.
6) Measure the current luminance (Y) and the 
chromaticity coordinates (x, y) using the 
colorimeter.
7) Press as to select a color, then press qw to 
adjust the value.
8) Once all the input is completed, press the 
 button.
r
f The 
[MEASURED MODE]  screen is displayed.
9) Press as to select [TARGET DATA].
10) Press the  button.
r
f The 
[TARGET DATA]  screen is displayed.
11)...

70 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
[AUTO SIGNAL]
Set automatic execution of auto setup.
The screen display position or signal level can be adjusted automatically without pressing the  button on the remote control on 
each occasion if you input unregistered signals frequently at meetings, \
etc.
1) Press as to select [AUTO SIGNAL].2) Press qw to switch [AUTO SIGNAL].
r
f The setting will change between [OFF] and [ON] each time you 
press the button.
r
r [AUTO SIGNAL]
[OFF]
Set input...