Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

ENGLISH - 91
Chapter 4 Settings — [SECURITY] menu
3) Press as to select [CONTROL PANEL] or 
[REMOTE CONTROL].
4) Press the  button.
r
f The 
[CONTROL PANEL]  screen or the [REMOTE CONTROL]  
screen is displayed.
5) Press as to select an item, and press the 
 button.
6) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
r
r [CONTROL PANEL] and [REMOTE CONTROL]
r
f You can set the limitation on the control from the control panel and 
remote control.
[ENABLE]
Enables all...

92 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[NETWORK] menu
Select [NETWORK] from the main menu, and select the item from the sub-me\
nu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network func\
tion.
1) Press as to select [NETWORK SETUP].
2) Press the  button.
r
f The 
[NETWORK SETUP]  screen is displayed.
3) Press as to select...

ENGLISH - 93
Chapter 4 Settings — [NETWORK] menu
r
r [NETWORK CONTROL]
[WEB CONTROL]
Set to [ON] to control with the Web browser.
[PJLink CONTROL] Set to [ON] to control with the PJLink protocol.
[COMMAND CONTROL] Set to [ON] to control with the / terminal control command format 
(
x  page 123).
Refer to “Control commands via LAN” ( x page 119).
[COMMAND PORT] Set the port number used for command control.
[CRESTRON RoomView] Set to [ON] to control with RoomView of Crestron.
[AMX D.D.] Set to [ON] to...

94 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Name and function of network function parts
12 3
1 LAN10/100 lamp (yellow)
Lights on when connected to the 100BASE-TX.
2   terminal ( 10BASE-T/100BASE-TX )
Used to connect the LAN cable here. 3 
LAN LINK/ACT lamp (green)
Lights on when connected.
Flashes when transmitting/receiving data.
Attention
r
f Connect the LAN to indoor devices.
Accessing from the Web browser
1) Start up the Web browser on the computer.
2) Enter the IP address set on the projector...

ENGLISH - 95
Chapter 4 Settings — [NETWORK] menu
Descriptions of items
(1)
(2)
(3)
(4)
(5)
(6)
1  Page tab
Switches pages by clicking it.
2  [Status]
The status of the projector is displayed by clicking this item.
3  [Projector control]
The [Projector control] page is displayed by clicking this item. 4 
[Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5  [Change password]
The [Change password] page is displayed by clicking this item.
6  [CRESTRON RoomView]
The control page...

96 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Error information page
When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error details.
r
f The projector may go into the standby status to protect the projector de\
pending on the contents of the error.
[OK]: operating properly
[F AILED]: a problem occurred
[W ARNING]: warning
r
r Problem occurrence [FAILED]
Parameter
Description
[MAIN CPU BUS] There is a problem with the...

ENGLISH - 97
Chapter 4 Settings — [NETWORK] menu
[Network status] page
Click [Status]
 → [Network status].
The current network setting status is displayed.
[Access error log] page
Click [Status]  → [Access error log].
The error log on the WEB server is displayed such as access to the pages that do not exist or access with unauthorized user names or 
passwords.
[Access log] page
Click [Status]  → [Access log].
The log such as user name accessed to the WEB control page, accessed IP  address, and accessed...

98 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Basic control] page
Click [Projector control]
 → [Basic control].
(1)
(2)
(4)
(6) (3)
(5)
1 
[POWER]
Switches the power on/off.
2  [SHUTTER]
Switches between use or not use of the shutter function.
3  [OSD]
Switches between on (display)/off (no display) of the on-screen 
display function. 4 
[SYSTEM]
Switches the system method.
5  On-screen display of the projector
Displays the same content as the on-screen display of the 
projector. The settings of the...

ENGLISH - 99
Chapter 4 Settings — [NETWORK] menu
r
f The following setting change screen is displayed by pressing the [Change] button.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1 
[PROJECTOR NAME]
Enter the name of the projector. Also enter the host name if it is 
required when using a DHCP server, etc.
2  [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
3  [IP ADDRESS]
Enter the IP address when not using a DHCP server.
4  [SUBNET MASK]
Enter the subnet mask when not using a DHCP server....

100 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Note
r
f The replacement of the battery inside the projector is required when the\
 time goes out of alignment right after correcting the time. Please 
consult your dealer.
[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]
 → [Ping test].
(1)
(2)
(3)
(4)
1  [Input IP address]
Enter the IP address of the server to be tested.
2  [Submit]
Executes the connection test. 3...