Home
>
Panasonic
>
Projector
>
Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions
Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions
Here you can view all the pages of manual Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
ENGLISH - 121 Chapter 6 Appendix — Technical information r r Error response Error message Termination symbol “ERR1” Undefined control command (CR) 0x0d “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period “ERR4” Timeout or no-acceptable period “ERR5” Wrong data length “ERRA” Password mismatch 4 bytes 1 byte / terminal The / terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled from a computer. Connection For one projectorFor multiple...
Page 122
122 - ENGLISH Chapter 6 Appendix — Technical information Sync. method Asynchronous Baud rate 9 600 bps Parity None Character length 8 bit Stop bit 1 bit X parameter None S parameter None Basic format Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control. (2 bytes)ID2 characters (2 bytes) Semi-colon (1 byte) Colon (1 byte) Command 3 characters (3 bytes) Parameter (undefined length) End (1...
Page 123
ENGLISH - 123 Chapter 6 Appendix — Technical information Cable specifications Projector ( terminal) 1 NC NC 1 Computer (DTE specifications) Projector 1 ( terminal)1 NC NC 1 Projector 2 ( terminal) 2 2 22 3 3 33 4 NC NC 4 4NC NC 4 5 5 55 6 NC NC 6 6NC NC 6 7 7 77 8 8 88 9 NC NC 9 9NC NC 9 Control commands The following table lists the commands that can be used to control the p\ rojector using a computer. r r Projector control command Command Details Remarks (parameters) PON Power on...
Page 124
124 - ENGLISH Chapter 6 Appendix — Technical information terminal It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control signals cannot reach. Use the terminal on the connecting terminals of the projector to connect to the control panel. RGB1 VIDEO RGB2 S-VIDEO DVI-D HDMI Remote control Contact control Remote control/Contact control Standby Lit Lamp Meeting room or other installation location Remote control panel...
Page 125
ENGLISH - 125 Chapter 6 Appendix — Technical information Two window display combination list (PT-DW740E only) Input A Input B RGB1 Still image RGB1 Movie RGB2 Still image RGB2 Movie VIDEO S-VIDEO DVI-D Still image DVI-D Movie HDMI Still image HDMI Movie RGB1 Still image ― ― llllllll RGB1 Movie ― ― l― ―― l― l― RGB2 Still image l l― ― llllll RGB2 Movie l ― ―――― l― l― VIDEO l― l― ―― l― l― S-VIDEO l― l― ―― l― l― DVI-D Still image l lllll― ――― DVI-D Movie l ― l― ―――――― HDMI Still image l lllll― ――― HDMI...
Page 126
126 - ENGLISH Chapter 6 Appendix — Technical information Mode Resolution (Dots) Scanning frequency Dots clock frequency(MHz) Format Plug and play *3 Horizontal (kHz) Vertical (Hz) RGB2DVI-D EDID1 DVI-D EDID2 DVI-D EDID3 HDMI 1125 (1080)/60p 1 920 x 1 08067.560.0148.5 R/Y/H/D ― l― ll 1125 (1080)/50p 1 920 x 1 08056.350.0148.5 R/Y/H/D ― l― ll VESA400 640 x 40037.985.131.5 R/H/D ――――― VGA 640 x 400 31.570.125.2 R/H/D ――――― 640 x 480 31.559.925.2 R/H/D lllll 640 x 480 35.066.730.2 R/H/D ――――― 640 x 480...
Page 127
ENGLISH - 127 Chapter 6 Appendix — Specifications Specifications The following table describes the specifications of the projector . Model No.PT-DW740EPT-DW740EL PT-DX810EPT-DX810EL Power supply AC 220 V - 240 V 50 Hz/60 Hz Power consumption 760 W (4.3 A) (0.3 W when [STANDBY MODE] is set to [ECO], and 8 W when set to [NORMAL]) DLP chips Panel size 0.65" (aspect ratio 16:10) 0.7" (aspect ratio 4:3) Display method 1-unit DLP chips, DLP type Number of pixels 1 024 000 pixels (1 280 x 800 dots) 786...
Page 128
128 - ENGLISH Chapter 6 Appendix — Specifications Model No. PT-DW740EPT-DW740EL PT-DX810EPT-DX810EL Terminals terminal 1 set (BNC x 5) RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VDTTL high impedance, automatic positive/negative polarity compatible YPBPR signalY: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω terminal 1 set, high-density D-Sub 15p (female) RGB signals 0.7 V [p-p] 75 Ω...
Page 129
ENGLISH - 129 Chapter 6 Appendix — Dimensions Dimensions Units: mm 498 (19-19/32) 77.5 (3-1/16)20 (25/32) 21 (13/16) 9 (11/32) 5 (3/16) 155 (6-3/32) 43 (1-11/16) 423 (16-21/32) * The above shows the dimensions with the standard zoom lens attached. * Actual dimensions may differ depending on the product.
Page 130
130 - ENGLISH Chapter 6 Appendix — Ceiling mount bracket safeguards Ceiling mount bracket safeguards r f When installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (ET -PKD56H: for high ceilings, ET-PKD55S: for low ceilings). r f When installing the projector, attach the drop-prevention set included with the ceiling mount bracket\ to the projector. If you need the special drop-prevention set (Product No.: TTRA0214), consult your dealer. r f Request for a qualified...