Home > Panasonic > Projector > Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

Here you can view all the pages of manual Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 121

ENGLISH - 121
Chapter 6 Appendix — Technical information
r
r Error response
Error message
Termination symbol
“ERR1” Undefined control command
(CR)
0x0d
“ERR2”
Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
4 bytes 1 byte
/ terminal
The / terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled 
from a computer.
Connection
For one projectorFor multiple...

Page 122

122 - ENGLISH
Chapter 6 Appendix — Technical information
Sync. method Asynchronous
Baud rate 9 600 bps
Parity None
Character length 8 bit
Stop bit 1 bit
X parameter None
S parameter None
Basic format
Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according 
to the details of control.
(2 bytes)ID2 characters 
(2 bytes) Semi-colon
 
(1 byte)
Colon (1 byte)
Command 3 characters  (3 bytes) Parameter 
(undefined length) End (1...

Page 123

ENGLISH - 123
Chapter 6 Appendix — Technical information
Cable specifications
 
Projector
( 
terminal) 1
NC   NC 1
Computer
(DTE specifications) Projector 1
( 
terminal)1
NC   NC 1
Projector 2
( 
terminal)
2
2 22
3 3 33
4 NC   NC 4 4NC   NC 4
5 5 55
6 NC   NC 6 6NC   NC 6
7 7 77
8 8 88
9 NC   NC 9 9NC   NC 9
Control commands
The following table lists the commands that can be used to control the p\
rojector using a computer.
r
r Projector control command
Command
Details Remarks (parameters)
PON Power on...

Page 124

124 - ENGLISH
Chapter 6 Appendix — Technical information
 terminal
It is possible to control the projector remotely (by external contact) from a control panel located away from the projector where remote control 
signals cannot reach. Use the  terminal on the connecting terminals of the projector to connect to the control panel.
RGB1 VIDEO
RGB2 S-VIDEO
DVI-D HDMI
Remote control
Contact control
Remote control/Contact control Standby Lit
Lamp
Meeting room or other installation location Remote control panel...

Page 125

ENGLISH - 125
Chapter 6 Appendix — Technical information
Two window display combination list (PT-DW740E only)
Input A
Input B RGB1
Still 
image RGB1
Movie RGB2
Still 
image RGB2
Movie VIDEO
S-VIDEO DVI-D
Still 
image DVI-D
Movie HDMI
Still 
image HDMI
Movie
RGB1
Still image ―
―
llllllll
RGB1
Movie ―
―
l―
――
l―
l―
RGB2
Still image l
l―
―
llllll
RGB2
Movie l
―
――――
l―
l―
VIDEO l―
l―
――
l―
l―
S-VIDEO l―
l―
――
l―
l―
DVI-D
Still image l
lllll―
―――
DVI-D
Movie l
―
l―
――――――
HDMI
Still image l
lllll―
―――
HDMI...

Page 126

126 - ENGLISH
Chapter 6 Appendix — Technical information
Mode Resolution
(Dots) Scanning frequency
Dots 
clock frequency(MHz) Format Plug and play
*3
Horizontal
(kHz) Vertical
(Hz) RGB2DVI-D
EDID1 DVI-D
EDID2 DVI-D
EDID3 HDMI
1125 (1080)/60p 1 920 x 1 08067.560.0148.5 R/Y/H/D ―
l―
ll
1125 (1080)/50p 1 920 x 1 08056.350.0148.5 R/Y/H/D ―
l―
ll
VESA400 640 x 40037.985.131.5 R/H/D ―――――
VGA 640 x 400
31.570.125.2 R/H/D ―――――
640 x 480 31.559.925.2 R/H/D
lllll
640 x 480 35.066.730.2 R/H/D ―――――
640 x 480...

Page 127

ENGLISH - 127
Chapter 6 Appendix — Specifications
Specifications
The following table describes the specifications of the projector .
Model No.PT-DW740EPT-DW740EL PT-DX810EPT-DX810EL
Power supply AC 220 V - 240 V  50 Hz/60 Hz
Power consumption 760 W (4.3 A)
(0.3 W when [STANDBY MODE] is set to [ECO], and 8 W when set to [NORMAL])
DLP chips Panel size
0.65" (aspect ratio 16:10) 0.7" (aspect ratio 4:3)
Display method 1-unit DLP chips, DLP type
Number of pixels 1 024 000 pixels
(1 280 x 800 dots) 786...

Page 128

128 - ENGLISH
Chapter 6 Appendix — Specifications
Model No. PT-DW740EPT-DW740EL PT-DX810EPT-DX810EL
Terminals  
terminal
1 set (BNC x 5)
RGB signals
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative polarity compatible
VDTTL high impedance, automatic positive/negative polarity compatible
YPBPR signalY: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 
terminal 1 set, high-density D-Sub 15p (female)
RGB signals
0.7 V [p-p] 75 Ω...

Page 129

ENGLISH - 129
Chapter 6 Appendix — Dimensions
Dimensions
Units: mm
498 (19-19/32)
77.5 (3-1/16)20 (25/32)
21 (13/16)
9 (11/32)
5 (3/16)
155 (6-3/32) 43 (1-11/16) 423 (16-21/32)
* 
The above shows the dimensions with the standard zoom lens attached.
*  Actual dimensions may differ depending on the product.  

Page 130

130 - ENGLISH
Chapter 6 Appendix — Ceiling mount bracket safeguards
Ceiling mount bracket safeguards
r
f When installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (ET
-PKD56H: for high ceilings, ET-PKD55S: for 
low ceilings).
r
f When installing the projector, attach the drop-prevention set included with the ceiling mount bracket\
 to the projector.
If you need the special drop-prevention set (Product No.: TTRA0214), consult your dealer.
r
f Request for a qualified...
Start reading Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

Related Manuals for Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

All Panasonic manuals