Panasonic DLP Based Projector PT-DZ8700U PT-DS8500U PT-DW8300U Operating Instructions

DISPLAY OPTION menu
ENGLISH - 71
Settings
Adjust the light portion of RED.
4  ) 
In [RED] of [WHITE BALANCE HIGH], adjust  
z
the 100 % of the white level of the image signal 
to the position corresponding to 100 % on the 
waveform monitor. (
Æpage  54)
Adjust [GREEN] and [BLUE] in a 
5  ) 
similar manner.
Note
When the DVI-D signal, HDMI signal, or SDI signal is 
 
z
inputted, check that the [DVI SIGNAL LEVEL], [HDMI 
SIGNAL LEVEL], and [SDI SIGNAL LEVEL] are correctly 
set before adjusting the black...

DISPLAY OPTION menu
72 - ENGLISH
Settings
 
JAdjusting the position 
automatically
Select [POSITION ADJUST] in step 3).
1. 
Press ◄► to switch [POSITION 
2. 
ADJUST].
The setting will change as follows each time  
z
◄► is pressed.
OFFON
OFF Automatic adjustment is off.
ON Screen position and size are 
adjusted during AUTO SETUP 
operation.
 
JAdjusting the signal level 
automatically
Select [SIGNAL LEVEL ADJUST] in 
1. 
step 3).
Press ◄► to switch [SIGNAL LEVEL 
2. 
ADJUST].
The setting will change as...

DISPLAY OPTION menu
ENGLISH - 73
Settings
Press ◄► to switch [DVI SIGNAL 
6  ) 
LEVEL].
The setting will change as follows each time  
z
◄► is pressed.
0-255 : PC16-235
0-255 : PC Select this when, for example, 
an external device (PC, etc.) is 
connected via the DVI terminal 
output.
16-235 Select this when, for example, an 
external device (DVD player, etc.) 
is connected via the HDMI terminal 
output using a conversion cable.
Note
The optimal setting differs depending on the output 
 
z
setting of the...

DISPLAY OPTION menu
74 - ENGLISH
Settings
 
JOSD DESIGN
This sets the color of the on-screen display (OSD).
1 : Yellow2 : Blue
6 : Brown
3 : White
5 : Pink4 : Green
 
JOSD MEMORY
The current menu cursor position will be retained 
temporarily unless the projector switched off.
ONOFF
 
JINPUT GUIDE
This sets whether to display the currently 
selected input guide at the position set for [OSD 
POSITION].
ONOFF
 
JWARNING MESSAGE
This sets the display of warning messages.
ONOFF
BACK COLOR
This sets the color...

ENGLISH - 75
Settings
PROJECTOR SETUP menu
See “Navigating through the menu”   
z
(Æpage  49).
See “MAIN MENU” and “SUB MENU”  
 
z
(Æpage  50).
PROJECTOR ID
The projector has an ID number setting function that 
helps the user to control two or more projectors either 
simultaneously or separately with a single remote 
control.
Press ▲▼ to select [PROJECTOR ID].
1  ) 
Press ◄► to switch [PROJECTOR ID].
2  ) 
The setting will change as follows each time  
z
◄► is pressed.
ALL1
64 2
Note
The ID number can...

PROJECTOR SETUP menu
76 - ENGLISH
Settings
COOLING CONDITION
You can control the fan speed for projecting 
angle. When the projector is angled, [COOLING 
CONDITION] setting must be set correctly. Failure to 
observe this may result in malfunctions, or the life of 
the lamp or the other components may be shortened.
Press ▲▼ to select [COOLING 
1  ) 
CONDITION].
Press  button.
2  ) 
The [COOLING CONDITION] screen will be  
z
displayed.
Press ▲▼ to select cooling condition.
3  ) 
Press  button.
4  ) 
When...

PROJECTOR SETUP menu
ENGLISH - 77
Settings
Note
Only when [DUAL] or [SINGLE] is selected in [LAMP 
 
z
SELECT], [LAMP RELAY] is available
If [DUAL] is selected in [LAMP SELECT], only one lamp 
 
z
is turned on for four hours after the set time.
The setting time will be the local time.  
 
z
(
Æpage  84)
The time can be input directly using the numeral keys on 
 
z
the remote control.
If the filter is running low, only one lamp will light even 
 
z
when [DUAL] is selected. The lamps will light as normal...

PROJECTOR SETUP menu
78 - ENGLISH
Settings
When [MODE] is set to [AUTO] 
Q
Press ▲▼ to select [LINK].
5  ) 
Press ◄► to switch [LINK].
6  ) 
The setting will change as follows each time  
z
◄► is pressed.
OFFGROUP A
GROUP DGROUP CGROUP B
OFF Brightness is corrected using the 
brightness sensor of one of the 
projectors, without linking with other 
projectors.
A smaller [BRIGHTNESS CONTROL 
GAIN] value means the constant 
brightness can be maintained for longer.
GROUP   A - D Brightness is corrected using...

PROJECTOR SETUP menu
ENGLISH - 79
Settings
When [MODE] of brightness control is  
Q
[OFF]
The state that the brightness control is OFF is 
displayed.
 
The name of this projector is displayed.
When [MODE] of brightness control is  
Q
[AUTO] and [LINK] is [OFF]
The state that the LINK is OFF is displayed.
 
The name of this projector is displayed.
 The state is indicated by color.
GREEN :    The brightness can be corrected by a 
significant margin.
YELLOW :    The brightness can no longer be 
corrected by...

PROJECTOR SETUP menu
80 - ENGLISH
Settings
Details of error z
Error message Remedial measure
[Exceed maximum 
number of projectors.] Limit number of 
• 
projectors in same group 
to 8.
When linking 9 or 
• 
more projectors, use a 
computer and the [Multi 
Projector Monitoring & 
Control Software].
[Please check the 
COMMAND CONTROL 
setting.] Turn [ON] the 
• 
[COMMAND CONTROL] 
on the on-screen menu 
[NETWORK CONTROL] 
for the projector with the 
error display.
Set [COMMAND 
• 
PORT] of [NETWORK...