Panasonic DLP Based Projector PT-DZ8700U PT-DS8500U PT-DW8300U Operating Instructions

ENGLISH - 91
Settings
SECURITY menu
See “Navigating through the menu”   
z
(Æpage  49).
See “MAIN MENU” and “SUB MENU”  
 
z
(Æpage  50).
When you apply to the [SECURITY] menu 
 
z
before you change the password to your original, 
perform to input the following factory default 
password operation.
Press ▲►▼◄▲►▼◄  and  button.
Attention
When you apply to the SECURITY menu after you 
 
z
change the password to your original in the [SECURITY 
PASSWORD CHANGE] menu, input the original 
password operation....

SECURITY menu
92 - ENGLISH
Settings
DISPLAY SETTING
You can set your original text, such as company 
name or URL information, to display regularly on the 
projected image while projecting.
Press ▲▼ to select [DISPLAY 
1  ) 
SETTING].
Press ◄► to switch [DISPLAY 
2  ) 
SETTING].
The setting will change as follows each time  
z
◄► is pressed.
OFFTEXTLOGO1
OFF The text display is disabled.
TEXT The text display is enabled.
LOGO1 The picture registered by the user 
will be projected.
Note
Separate software...

SECURITY menu
ENGLISH - 93
Settings
CONTROL DEVICE SETUP
Control from the remote control and main unit controls 
can be restricted.
Press ▲▼ to select [CONTROL 
1  ) 
DEVICE SETUP].
Press  button.
2  ) 
The [CONTROL DEVICE SETUP] screen will  
z
be displayed.
Press ▲▼ to select [CONTROL 
3  ) 
PANEL] or [REMOTE CONTROLLER].
Press  button.
4  ) 
[ 
zCONTROL PANEL] screen or [REMOTE 
CONTROLLER] screen will be displayed.
 
JCONTROL PANEL
Restriction of control from the main unit controls  
z
can be set....

94 - ENGLISH
Settings
NETWORK menu
See “Navigating through the menu”   
z
(Æpage  49).
See “MAIN MENU” and “SUB MENU”  
 
z
(Æpage  50).
NETWORK SETUP
Make the initial network settings before using the 
network connection.
Press ▲▼ to select [NETWORK 
1  ) 
SETUP].
Press  button.
2  ) 
The [NETWORK SETUP] screen will be  
z
displayed.
Press ▲▼ to select an item, and 
3  ) 
change the setting according to the 
instructions.
PROJECTOR  
NAME
(Display of host 
name and setting)
Change as needed when using...

NETWORK menu
ENGLISH - 95
Settings
Network connections
The projector is equipped with network functions, and web browser contro\
ls can be used to carry out the following 
operations from a computer.Projector settings and adjustments
 
z
Projector status display 
z
Transmission of E-mail messages if there is a problem with the projector 
z
Note
A LAN cable is required to use the network function.
 
z
A Web browser is required to use this function. Make sure that a Web browser is available in the system....

NETWORK menu
96 - ENGLISH
Settings
Accessing from the Web browser
Activate the Web browser in the personal computer.
1  ) 
Enter the IP address set by the projector into the URL input field of the Web browser.
2  ) 
Enter your “User name” and “Password”.
3  ) 
The factory default settings are user1 (user privileges) or admin1 (a\
dministrator privileges) for the user  
z
name and panasonic (lowercase letters) for the password.
Click [OK] to display the Projector status page.
4  ) 
Note
Avoid activating...

NETWORK menu
ENGLISH - 97
Settings
Change Password page 
J
Click [Change password].
 
Administrator
 User
Administrator mode 
Q
Administrator account 
z
  Account
 Current user name input field
  Current password input field
 New user name input field
 New password input field
 New password input field  
(re-enter for confirmation)
  Button for executing password change
User account
 
z
  Account
 New user name input field
  New password input field
 New password input field  
(re-enter for...

NETWORK menu
98 - ENGLISH
Settings
Basic control page 
J
To move from another page, click [Projector control], then [Basic control\
].
 
Page selection tabs
  Click these to switch pages.
 This displays the on-screen status. It is displayed 
even if the on-screen display of the projector is 
set to off.
  Monitor information button
  Click this item, and the status of the projector is 
displayed.
 Detailed set up button
  Click this item to display the advanced settings 
page.
 Change password button...

NETWORK menu
ENGLISH - 99
Settings
Detail control page 
J
Click [Projector control], then [Detail control] to display the Detail c\
ontrol page.
 
Pressing these buttons controls the projector and 
updates the on-screen description on the right of 
the control page when control is finished.
 Lens adjustment
  Test pattern display
 This button updates the on-screen description 
on the right of the control page with the latest 
information.
 Menu display
Projector status page 
J
Click [Status], then...

NETWORK menu
100 - ENGLISH
Settings
Error information page 
J
When “Error (Detail)” is displayed on the status information scr\
een, click it to display the error details.
Depending on the nature of the error, the projector may be placed in the standby mode for its own 
 
z
protection.
When [FAILED] has appeared for an item 
Q
Parameter
Description
MAIN CPU BUSTrouble has occurred in the microcomputer circuitry. Consult your dealer.
FAN Trouble has occurred in the fan or its drive circuit. Consult your...