Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U Operating Instructions
Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Replacement ENGLISH - 31 Maintenance Replacement procedure Removing and replacing the lamp unit 1. Use a Phillips-head screwdriver to loosen the “lamp unit cover fixing screw” (1 screw) on the back of the projector until the screws turn freely, and remove the lamp unit cover. Slide the lamp unit cover to the control buttons and pull to remove. 2. Use a Phillips-head screwdriver to remove the “lamp unit fixing screws” (3 screws). 3. Hold the handles of the lamp unit and pull the used lamp unit...
Page 32
Maintenance Replacement ENGLISH - 32 Before replacing the ACF Wait until the cooling fan stops and turn off the POWER switch of the projector in proper way. Disconnect the power cord from the wall outlet. Contact an Authorized Service Center to purchase a replacement ACF (ET-ACF100). The ACF unit to be replaced should be an unused product. When to replace the ACF The ACF unit is consumable product and effects on ventilation. The FILTER indicator will inform you of the replacement timing. You can...
Page 33
ENGLISH - 33 Maintenance Troubleshooting Should any problem persist, contact your dealer. ProblemCauseReference page*1 *1. CD-ROM: See the functional instructions in the provided CD-ROM. Power does not turn on. The power cord may not be connected. The POWER switch is turned off. No electric supply is at the wall outlet. TEMP indicator is lit or flashes. LAMP1/LAMP2 indicator is lit or flashes. The lamp unit cover has not been securely installed. The circuit breakers have tripped.18 19 19 28 28...
Page 34
ENGLISH - 34 Appendix Technical Information List of compatible signals Mode Display resolution (dots) *1 Scanning frequencyDot clock frequency Picture quality*2 PnP*3 Format*4 H (kHz)V (Hz)(MHz)RGB2DVI-D EIDI1DVI-D EIDI2 NTSC/NTSC 4.43/ PAL-M/PAL60720 x 480i 15.7 59.9 - A V/S PAL/PAL-N/SECAM 720 x 576i 15.6 50.0 - A 525i (480i) 720 x 480i 15.7 59.9 13.5 A R/Y/SDI 625i (576i) 720 x 576i 15.6 50.0 13.5 A 525p (480p) 720 x 483 31.5 59.9 27.0 AD D/R/Y 625p (576p) 720 x 576 31.3 50.0 27.0 AD 1 125 (1...
Page 35
Technical Information ENGLISH - 35 Appendix Display dots of each model WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 A D/R 1 920 x 1 080*91 920 x 1 080 66.6 59.9 138.5 AA*5 WUXGA*91 920 x 1 200 74.0 60.0 154.0 AA*8DD *1. The “i” appearing after the resolution indicates an interlaced signal. Flicker (line flicker) may be caused in images if interlace is con- nected. *2. The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image...
Page 36
Appendix Technical Information ENGLISH - 36 Specifications Power supplyAC 120 V 60 Hz Power consumption• PT-DZ6710U/PT-DZ6700U: 820 W • PT-DW6300U/PT-D6000U: 780 W • PT-D5000U: 610 W During standby (when fan is stopped): Approx. 8 W *1 Amps• PT-DZ6710U/PT-DZ6700U: 8 A • PT-DW6300U/PT-D6000U: 7.2 A • PT-D5000U: 5.5 A DLP™ chip Panel size (diagonal)• PT-DZ6710U/PT-DZ6700U: 0.67 type • PT-DW6300U: 0.65 type • PT-D6000U/PT-D5000U: 0.7 type Aspect ratio• PT-DZ6710U/PT-DZ6700U/PT-DW6300U: 16 : 10 •...
Page 37
Technical Information ENGLISH - 37 Appendix Te r m i n a l s S-VIDEO IN1 set, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω, compatible with S1 signal VIDEO IN1 set, BNC pin jack 1.0 V [p-p], 75 Ω RGB 1 IN1 set, BNC x 5 RGB signal 0.7 V [p-p], 75 Ω • G-SYNC: 1.0 V [p-p], 75 Ω • HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible • VD: TTL high impedance, automatic positive/negative polarity compatible YP BPR signal • Y: 1.0 V [p-p] Synchronisation signal included •P...
Page 38
Appendix Technical Information ENGLISH - 38 The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security. Installation work of the ceiling mount bracket should only be carried by a qualified technician according to the following procedure. Even if it is guarantee period, the manufacturer is not responsible for...
Page 39
Technical Information ENGLISH - 39 Appendix Microsoft and Microsoft logos, Windows, Windows® XP, and Windows Vista® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other types of names such as company names and product names appearing in this instruction manual are trademarks or registered trademarks of their respective holders. The ® and TM marks are not indicated in this instruction manual. Dimensions Trademark acknowledgements...
Page 40
ENGLISH - 40 Appendix Index A Accessories .................................................................... 11 Air exhaust port .............................................................. 12 Air intake port ................................................................. 13 ASPECT Remote control button ................................................. 14 Remote control function ............................................... 22 Auto Cleaning Filter (ACF)...