Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-D5600U PT-D5600UL PT-DW5000U PT-DW5000UL Operating Instructions
Panasonic DLP Based Projector PT-D5600U PT-D5600UL PT-DW5000U PT-DW5000UL Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-D5600U PT-D5600UL PT-DW5000U PT-DW5000UL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Button to update settings
Primary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.253)
Secondary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.254)
DNS server set up page
Click [Network set up], then [DNS server set up] to display the DNS server set up page.
POP server setup page
The POP server is set on this page when POP authentication is required for mail transmissions.
Click [Network set up], then [POP server...](http://img.usermanuals.tech/thumb/58/75762/w300_pt-d5600u_ul_dw5000u_om_d-50.png "Page 51
51
Button to update settings
Primary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.253)
Secondary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.254)
DNS server set up page
Click [Network set up], then [DNS server set up] to display the DNS server set up page.
POP server setup page
The POP server is set on this page when POP authentication is required for mail transmissions.
Click [Network set up], then [POP server...")
51 Button to update settings Primary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. 192.168.0.253) Secondary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. 192.168.0.254) DNS server set up page Click [Network set up], then [DNS server set up] to display the DNS server set up page. POP server setup page The POP server is set on this page when POP authentication is required for mail transmissions. Click [Network set up], then [POP server...
Page 52
![Page 52
52
Using Web Browser Control
Contents of mail sent
• Mail with the contents shown below is sent when the E-mail
settings have been established.
Adjust clock page
Click [Network set up], then [Adjust clock] to display the Adjust clock page.
• Mail with the contents shown below is sent
when an error has occurred.
Time zone selection
Button to update time zone setting
Button to update time and date
settings
New date field
New time field
• If the time becomes incorrect immediately after setting the correct...](http://img.usermanuals.tech/thumb/58/75762/w300_pt-d5600u_ul_dw5000u_om_d-51.png "Page 52
52
Using Web Browser Control
Contents of mail sent
• Mail with the contents shown below is sent when the E-mail
settings have been established.
Adjust clock page
Click [Network set up], then [Adjust clock] to display the Adjust clock page.
• Mail with the contents shown below is sent
when an error has occurred.
Time zone selection
Button to update time zone setting
Button to update time and date
settings
New date field
New time field
• If the time becomes incorrect immediately after setting the correct...")
52 Using Web Browser Control Contents of mail sent • Mail with the contents shown below is sent when the E-mail settings have been established. Adjust clock page Click [Network set up], then [Adjust clock] to display the Adjust clock page. • Mail with the contents shown below is sent when an error has occurred. Time zone selection Button to update time zone setting Button to update time and date settings New date field New time field • If the time becomes incorrect immediately after setting the correct...
Page 53
![Page 53
53
Network config page
Set this to ON to enable the DHCP client
function.
Enter the IP address if DHCP server is
not used.
Enter the subnet mask if DHCP server is
not used.
Enter the gateway address if DHCP
server is not used.
Enter the name of the projector here. Enter the host name
here if it is required when the DHCP server is going to be
used, for instance.
Network status page
Click [Network set up], then [Network status] to display the Network status page.
Network software version display
Set IP...](http://img.usermanuals.tech/thumb/58/75762/w300_pt-d5600u_ul_dw5000u_om_d-52.png "Page 53
53
Network config page
Set this to ON to enable the DHCP client
function.
Enter the IP address if DHCP server is
not used.
Enter the subnet mask if DHCP server is
not used.
Enter the gateway address if DHCP
server is not used.
Enter the name of the projector here. Enter the host name
here if it is required when the DHCP server is going to be
used, for instance.
Network status page
Click [Network set up], then [Network status] to display the Network status page.
Network software version display
Set IP...")
53 Network config page Set this to ON to enable the DHCP client function. Enter the IP address if DHCP server is not used. Enter the subnet mask if DHCP server is not used. Enter the gateway address if DHCP server is not used. Enter the name of the projector here. Enter the host name here if it is required when the DHCP server is going to be used, for instance. Network status page Click [Network set up], then [Network status] to display the Network status page. Network software version display Set IP...
Page 54
54 Using the PJLink™protocol The network functions of the projector are compatible with PJLink™Class 1. The operations mentioned below can be performed from a personal computer using the PJLink™protocol. • Projector settings • Projector status inquiry Supported commands The commands for controlling the projector using the PJLink™protocol are as given in the table below. PJLink™security authentication The password used in PJLink™is the same as the password set in the Web Browser Control. To use PJLink™...
Page 55
55 Before asking for service---Before asking for service, check the following points. SymptomsChecks • Is the power cord plug correctly plugged in? • Is the MAIN POWER turned on? • Is electricity running to the power outlet? • Is the temperature monitor (TEMP) indicator on the front of the unit flashing or turned on? (See page 41) • Is the lamp monitor (LAMP) indicator on the front of the unit flashing or turned on? (See page 41) • Is the lamp unit door installed correctly? • A wrong ID is set. (See...
Page 56
56 Specifications PT-D5600UPT-D5600ULPT-DW5000UPT-DW5500UL Power supplyAC 120 V, 50 Hz/60 Hz Power consumption770 W (about 10 W in standby without fan running) DLPTMpanel Panel size Display system Number of pixels0.7 inch (aspect ratio 4:3)0.65 inch (aspect ratio 15:9) DMDTMelement, DLPTMtype 786 432 pixels (1 024 x 768 dots)983 040 pixels (1 280 x 768 dots) Lens Powered zoom Powered focus control 1 to 1.32 F=1.7 to 2.0 f=25.6 mm (1) to 33.8 mm (1.3) 1 to 1.32 F=1.7 to 2.0 f=25.6 mm (1) to 33.8 mm...
Page 57
![Page 57
57
Interface ports
RGB2 input terminal
Video input terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
DVI-D terminal
LAN terminal
1 set of high-density, D-sub 15p (female)
[For YP
BPRinput]
Y: 1.0 V [p-p] synchronization signal included, P
BPR: 0.7 V[p-p] 75 Ω
[For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative polarity...](http://img.usermanuals.tech/thumb/58/75762/w300_pt-d5600u_ul_dw5000u_om_d-56.png "Page 57
57
Interface ports
RGB2 input terminal
Video input terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
DVI-D terminal
LAN terminal
1 set of high-density, D-sub 15p (female)
[For YP
BPRinput]
Y: 1.0 V [p-p] synchronization signal included, P
BPR: 0.7 V[p-p] 75 Ω
[For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative polarity...")
57 Interface ports RGB2 input terminal Video input terminal S-video input terminal Serial input/output terminal Remote1 input/output terminal Remote2 terminal DVI-D terminal LAN terminal 1 set of high-density, D-sub 15p (female) [For YP BPRinput] Y: 1.0 V [p-p] synchronization signal included, P BPR: 0.7 V[p-p] 75 Ω [For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted VD: TTL, high-impedance, positive/negative polarity...
Page 58
58 Compatible Signal List NTSC/NTSC4.43/ PAL-M/PAL60 PAL/PAL-N/SECAM 480i 576i 480p 576p 1080/60i 1080/50i 720/60p 720/50p VGA400 VGA480 SVGA MAC16 XGA MXGA WXGA MAC21 MSXGA SXGA UXGA720 720 720 720 720 720 1 920 1 920 1 280 1 280 640 640 640 640 640 640 640 800 800 800 800 800 832 1 024 1 024 1 024 1 024 1 024 1 024 1 152 1 152 1 152 1 280 1 280 1 280 1 280 1 152 1 280 1 280 1 280 1 280 1 400 1 600 x x x x x x x x x x x x x x x x x x x...
Page 59
59 Dimensions >PC< TBMU448 RGB 2 IN VDSYNC/HDB/PBG/YRR/PSERIALREMOTE 1 REMOTE 2INOUTLANDVI-D INRGB 1 INVIDEO INS-VIDEO ININ OUT86.5 (3 13/32) 167 (6 12/64) 157 (6 3/16) 530 (20 55/64) 436 (17 11/64) 368 (14 31/64) 425 (16 47/64) 441 (17 23/64) 4 (5/32) 12 (15/32) R30478.5 (18 27/32)unit : mm ( ) : inch Installation dimensions diagram • Leave a clearance of at least 50 cm so that the ventilation opening on the rear panel will not be blocked. • Be careful not to retain exhausted air on the back...
Page 60
60 NOTES IMPORTANTES CONCERNANT LA SÉCURITÉ AVERTISSEMENT: POUR RÉDUIRE LES RISQUES DE FEU OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER CE PRODUIT À L’EAU OU À L’HUMIDITÉ WARNING RISK OF ELECTRIC SHOCK. DO NOT OPEN MISE EN GARDE- WARNUNG- RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR. ZUR VERMEIDUNG EINES ELEKTRISCHEN SCHLAGES GERÄT NICHT ÖFFNEN. Le symbole de la flèche en forme d’éclair, dans un triangle, avertit l’usager de la présence de “tensions dangereuses” à l’intérieur du produit qui peuvent être de force...