Panasonic DLP Based Projector PT-D5600U PT-D5600UL PT-DW5000U PT-DW5000UL Operating Instructions

21
Connection
Setup precautions
• Before connecting any of your video/audio equipment to the projector, carefully read the owners manual
supplied with the equipment once again.
• All cable connections should be made with the entire system devices, including the projector, first turned off.
• Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect
cables.
• Video signals containing too much jitter may cause the images on the screen to randomly wobble or...

22
Connection
Example of connecting with PCs
RGB 2 IN
 VDSYNC/HDB/PBG/YRR/P
SERIALREMOTE 1
REMOTE 2INOUTLANDVI-D INRGB 1 INVIDEO INS-VIDEO  IN
IN OUT
RGB 2 IN
 VDSYNC/HDB/PBG/YRR/P
SERIALREMOTE 1
REMOTE 2INOUTLANDVI-D INRGB 1 INVIDEO INS-VIDEO  IN
IN OUT
DVI-D Cable (available in the market)
PC with
DVI-D terminalPC
PC
Control PC
Note• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on
page 58.
• If your PC has the resume feature (last memory), the computer...

23
Projection
Powering up the projector
When using an optional lens, install a projection
lens before powering up the projector. (Refer to
page 25.)
Remove the lens cover beforehand.
Connect the supplied power cable. 
(120 V AC, 50 Hz/60 Hz)
Press the “ I ” marked side of the MAIN
POWER switch to turn on the power.
The power indicator lights up red, and the projector is
placed in the standby mode.
Press the “ I ” button. [on the main unit
or the remote control]
The power indicator illuminates in green...

24
Projection
Powering off the projector
Press the POWER OFF “” button.
Select “OK” with  or  button and
press the ENTER button.
(or press the POWER OFF “” button
again.)
The projection of the image stops, and the power
indicator of the main unit lights up orange. (The
cooling fan keeps running.)
Wait until the power indicator of the
main unit turns to red (i.e., until the
cooling fan stops). 
Press the “” marked side of the MAIN
POWER switch to remove all power
from the projector. 
• The projector...

25
How to adjust the lensHow to install and remove the
projection lens (optional)
How to install the
projection lens
Align the guide of the projection lens
with the guide groove in the main unit.
Turn the lens clockwise until it clicks
into place.
How to remove the
projection lens
Turn the lens counterclockwise as
far as it will go.
While holding down the lens lock
button, turn the lens further
counterclockwise.
Remove the lens.
Note• Before replacing the lens, turn off the
projector’s power.
• Do not...

26
Using the digital zoom (– D.ZOOM +) function
A portion of the picture on the screen can be zoomed in with “– D.ZOOM +” buttons of the remote control. It is
useful for highlighting a specific object during the presentation.
Press the “– D.ZOOM +” button of the remote control.
The image is zoomed in.
Change the magnification with the “– D.ZOOM +”
button.
The magnification can be adjusted from 1.0 to 3.0 times.
Use  buttons to move the magnified
image.
To restore the original image, press the “MENU”...

27
On-screen menus
Structure of menu screens
Menus are extensively used for configuring, adjusting or reconfiguring the projector.
The menus structure is as follows:
MENU
LANGUAGEENGLISH
SELECT ENTER RETRN
OPTION2
ID
AUTO POW. OFF
PASSWORD FUNC1 LAMP POWER
HIGH
RS232C FRONT/REAR
FRONT
DESK/CEILING
DESK
LAMP SELECT
DUAL
SYSTEM INFORMATION
FAN CONTROL1
NORMAL
FAN CONTROL2
HORIZ.
DISABLE
 
ALL
SELECT ADJ RETRN
OPTION1
COLOR CORRECTION
BACK COLOR
BLACK
SUB MEMORY LIST
DVI EDID
EDID2:PCOFF CONTRAST MODE
AUTO...

28
On-screen menus
Basic menu operations
Press the “MENU” button.
The MENU appears on the screen.
Select (highlight) the desired item with
the or buttons.
Selected items are displayed in blue.
Press the “ENTER” button to enter your
selection.
The submenu for the selected option will now open.
(e.g. : PICTURE Menu)
Highlight the desired adjustment item
with the  or  buttons, then change
the parameter value with the  or
buttons.
(Example of separate adjustment screen)
• If no button is operated for approx....

29
Adjusting the picture
• For RGB signals• For DVI signals
• 
For S-Video/Video signals•For YPBPRsignals
PICTURE MODE
The picture mode can be selected from the
following depending on viewing conditions and the
video signal source in use:
DYNAMIC : Picture brightness/contrast ratio is
increased to suit brighter viewing
environments.
GRAPHIC : The picture becomes suitable for
input from to the personal
computer.
STANDARD : The picture becomes suitable for
moving images in general.
CINEMA : The picture...

30
Adjusting the position
POSITION
SELECT RETRN POSITION
ASPECT 4 : 3
ZOOM
CLOCK PHASE
KEYSTONE16ENTER
POSITION
The position where the images are displayed can
be moved here.
: The position is moved horizontally.
: The position is moved vertically.
ASPECT
AUTO : (For S-Video/Video signals only)
At this setting, when S1 video signals1
are identified as being input to the S-
Video connector or video ID signals are
identified as being input to the video
connector, the images are displayed
after...