Panasonic DLP Based Projector PT-D3500U Operating Instructions

31
Adjusting the position
KEYSTONE
KEYSTONE : Keystone distortion can be corrected
only along either horizontal bound of
the picture.
POSITION
SELECT RETRN POSITION
ASPECT 4 : 3
ZOOM
CLOCK PHASE
KEYSTONE16ENTER
POSITION
The position where the images are displayed can
be moved here.
: The position is moved horizontally.
: The position is moved vertically.
ASPECT
AUTO : (For S-Video/Video signals only)
If an S1 video signal is applied to the S-
VIDEO port, the picture is automatically
switched to the 16:9...

32
How to use ADVANCED MENU
ADVANCED MENU
SELSCT RETRN INPUT RESOLUTION BLANKING
DIGITAL CINEMA REALITY
1 CLAMP POS.
SXGA SXGA MODE RASTER POSITION
ENTER
INPUT RESOLUTION
Input resolution adjustment achieves the best
image when the screen flickers or halo is observed
around the contour.
: These select the items listed below.
: These select the value.
“TOTAL DOTS”, “DISPLAY DOTS”, “TOTAL
LINES” and “DISPLAY LINES”
Each item automatically displays a value in response
to the type of the input signal. If...

33
Changing the display languageAdjusting the audio
LANGUAGEENGLISH
SELECT ENTER RETRN
VOLUME
You can adjust the sound volume.
: Sound volume decreases.
: Sound volume increases.
AUDIO MUTE
You can activate/deactivate audio.
ON:  Audio is muted (you hear no sound).
OFF: Audio is activated (you can hear sound).
Menus, setting items, adjustment screens, and
control button names will be displayed in the
language the user chooses.
The available languages are:
ENGLISH, DEUTSCH, FRANÇAIS, ESPAÑOL,
ITALIANO, ,...

34
OPTION1 settings
OPTION1
COLOR CORRECTION
BACK COLOR
BLACK
SUB MEMORY LIST
DVI EDID
EDID2:PCOFF CONTRAST MODE
AUTO SIGNAL
SELECT RETRNENTER
COLOR CORRECTION
OFF : Standard setting
USER : The six colors of red, green, blue, cyan,
magenta and yellow can be adjusted
and registered for each of four signal
systems: Video, S-Video, RGB and
YP
BPR.
Press the “ENTER” button to make the
detailed settings.
SELECT
RETRN STORE 

35
OPTION2 settings
OPTION2
ID
AUTO POW. OFF
PASSWORD FUNC1 LAMP POWER
HIGH
RS232C FRONT/REAR
FRONT
DESK/CEILING
DESK
SYSTEM INFORMATION
FAN CONTROL1
NORMAL
FAN CONTROL2
HORIZ.
DISABLE
   KEY ASSIGNNORMAL
 
ALL
SELECT ADJ RETRN
ID
The projector has an ID number setting function
that helps the user to control two or more projectors
either simultaneously or separately with a single
remote control. The ID number is set to “ALL” by
default. Hence the ID number need not be set
when only one projector is...

36
OPTION2 settings
FAN CONTROL2
The fan can be controlled in accordance with the
direction in which the images are to be projected.
HORIZ. : Standard setting
VERTICAL : This is selected when projecting
images at a significant angle toward
the vertical (more than 30 degrees
from the horizontal).
FUNC1
You can set the functions of the FUNC1 button of
the remote control.
LAMP POWER: This button has the same
functions as “LAMP
POWER” of “OPTION2.”
ASPECT: This button has the same
functions as “ASPECT” of...

37
Displaying the internal test pattern
The projector has eight types of internal test patterns
to check the condition of the set.
To display test patterns, follow the steps below.The projector’s security function enables the password
input screen to be displayed or a company’s URL
address to be set and displayed underneath the
projected images.
: Search through the various types of test
patterns
Cycle of displayed internal
test patterns
• Results of adjustment on the image,
picture quality, position,...

38
Setting the network
The settings required for the network must be
established in order to use the web browser (page 47)
functions that the PC uses to control the projector.
HOST NAME : Make alteration if necessary
when to use the DHCP server.
DHCP : Set the DHCP item to ON when
to acquire an IP address
automatically using the DHCP
server. 
Set to OFF if DHCP server is not
used.
IP ADDRESS : Enter the IP address if DHCP
server is not used.
NET MASK : Enter the net mask if DHCP
server is not used....

Using the serial terminals
39
Communication conditions (Factory setting)
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this
order. Add parameters according to the details of control.
Start
(1 byte)
 ID designate3 command 
characters (3 bytes)Parameter
 (undefined length)End
(1 byte)  Two ID  
characters 
(2 bytes)
Semicolon
(1 byte)Colon
(1 byte)
ZZ, 1 to 64
STX C1 C2 C3 : P1 P2Pn ETXA D I 1 I 2 ;
(2 bytes)
Signal level
Synchronization...

40
Cable specifications
Control commands
When controlling the projector from a computer, the following commands are available:
• To connect the computer to the SERIAL terminal, prepare an adequate communication cable that
fits to your personal computer.Attention
Projector
1
2
3
4
5
6
7
8
9NC
NC
NC
NCComputer
(DTE specifications) 
1
2
3
4
5
6
7
8
9 NC
NC
NC
NC
Power “ON”
Power “OFF”
Switch input modes
Shutter function 
Volume
Lamp power setting
In standby mode, commands other than “PON” are invalid....