Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

141
Option Settings ADMIN ADMIN
Settings of the main application
Step 1
Display the operation window in the network mode.
Step 2
Select Option(O)… from Setup(O) on the menu bar.
The option window with the general tab will be dis-
played. The option window has four tabs: general,
view, connection and performance: to switch setup
windows. Refer to step 3 for details of each window.
Step 3
Perform the following settings.
q[General/View/Connection/Performance] tab
Click to display the desired setup window....

142
[View] tab
qDate Format(D)
Select a date display format. The following five for-
mats are available.
Example for Oct 15, 2005
(1) yyyy/mm/dd 2005/10/15
(2) mm/dd/yyyy 10/15/2005
(3) Mmm/dd/yyyy Oct/15/2005
(4) dd/mm/yyyy 15/10/2005
(5) dd/Mmm/yyyy 15/Oct/2005
wTime Format
Select 12-hour or 24-hour whether to display
time in 12-hour or 24-hour time format.
ePop-up notification
Select whether to display the pop-up window when
receiving the notification from the recorder.
Alarm(A):Check the box to...

143
Important:
It is necessary to set an active port to receive an
alarm notification by the Panasonic Alarm Protocol
when the Windows
®XP Professional or Home
Edition SP2 is run and the firewall is set to ON.
Perform the following exceptional settings for the
firewall:
e-1  Click [Security Center] on the Control Panel.
The Windows Security Center window will be dis-
played.
e-2  Click [Windows Firewall].
The Windows Firewall window will be displayed.
e-3  Click the [Exceptions] tab.e-4  Click the [Add...

144
q
Level CPU in use
High
Pentium
®D 3.0 GHz or equivalent
Middle
Pentium
®4 3.0 GHz or equivalent
Low
Pentium
®4 2.4 GHz or equivalent qDrawing efficiency(D)
Select a performance level of the CPU from High,
Middle, and Low for the PC where the software
is installed. 
e-7  Select as65dl, and click the [OK] button.
Image display interval in the local mode will be as follows according to the selected level.
ScreenResolution
VGA (640 x 480) QVGA (320 x 240)
High HighMiddle MiddleLow Low
Refresh interval...

145
Perform the following settings:
qNumber of concurrent downloads
Perform the settings for simultaneous download.
FTP:Select the maximum number of concurrent
download sessions from 1 - 10. The default set-
ting is 3.
wOverwrite setup for same file name.
Perform the settings whether to overwrite the older
file or to give another name to the new file.
Replace the existing file with new one.(R):
Check this box to overwrite the older file.
Save as Filename_n (n = 1 - 9, 0)(S):Check
this box to save as the...

146
• The status icon on the image display area is  .
aObtaining images from the recorder has failed. Check
whether the settings of the recorder registration are cor-
rect by performing the connection test.
129
• The image and displayed time-and-date has not been
refreshed.
aThe recorder and the camera may be disconnected.
Confirm the connection.
• Check the number of the registered users.
aUp to 32 users can be registered.
–
The live image of the
recorder is not being
refreshed.
Cannot register users....

• When playing an image file whose size is large, or when
playing on the multi-screen, a black screen may be dis-
played.
aClick the [PLAY] button. Playback will start from the
time displayed at the upper right of the playback image
display area.
147
• Playback may not be correctly performed depending on
the conditions of the hard disk.
aPerform the error check and defragmenter on the hard
disk drive.
– • Check the number of registered favorites.
aUp to 500 favorites can be registered.
• The message The...

148
• While running this software, the PC will not move to the
system standby mode or the system hibernation mode.– – • This may occur due to the display adapter and driver
combination.
aWhen this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. Right-click on the desktop and select Properties
from the displayed pop-up menu.
2. Select Settings from Display Properties, and
then...

149
• This dialog box will be displayed when CPU utilization of
the PC is high.
aThis does not affect the operation. Close the dialog box
by clicking the  button at the top right of the window,
and continue the operation. 
• This may occur when the PC in use does not meet the
system requirements.
aCheck if the PC in use meets the system requirements.
• When the [GO TO LAST] button or [PLAY] button is after
selecting two or more areas while displaying live images,
a black screen may be displayed on...

150
Displayed Message and Solutions
When clicking the [OK] button
The message window may be displayed when the [OK] button is clicked. Refer to the following to solve the problem.
Display/close the operation window
• Entered user name or password was incorrect. Try to log in again. If log
in fails again, refer to the administrator of this software. The administrator
should check the user settings.
• Available disk space where the downloaded files are to be stored is get-
ting smaller. It is recommended...