Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

121
Indications (Logs) Descriptions
Download failed. Filed when failed to connect to the recorder. Check that the recorder is con-
nected correctly by using the connection test.
File name already exists. Rename
and save. User authentication upon recorder
access failed.
No file found for download.
Download images started.
Download interrupted.
Download failed. Moved to end of
list.
Download failed. Moved to failed
download list.
Download was successful.
File name already exists. Overwrite
the existing...

122
Settings of the Recorder ADMIN ADMIN
It is necessary to register the recorder to play or download recorded images from the recorder. It is possible to regis-
ter up to 100 recorders.
Notes:
•Do not register a single recorder using multiple names. Otherwise, the alarm notification function will not work
and other functions may not work properly.
•It is necessary to perform the connection test to complete the recorder registration. The connection test checks
whether the recorder is connected and...

123
tFTP port number(O)
Specify the FTP port number of the recorder. 
A number from 1 - 65535 is available.
It is unnecessary to change it for normal use.
Important:
An FTP port needs to be set up so that the port
becomes usable for changing the FTP port number
to one other than 21 when the Windows
®XP
Professional or Home Edition SP2 is run and the
firewall is set to ON. Refer to page 143 for excep-
tional settings for the firewall.
yAdministrator Name(N)
Enter the same name set for ADMIN of the...

124
Note:
When 100 recorders are registered, a message
window that says Reached the maximum registra-
tion number. Cannot register. will be displayed.
Step 3
Complete settings above.
Step 4
Click the [Connection test(E)...] button.
The Connection test window will be displayed.2. Go to step 8.
Step 7
When the message of Connection failed is displayed
1. Check the description on the screen.
2. Click the [Close(C)] button.
The connection test window will be closed.
3. Return to the recorder registration...

125
The message window may be displayed when the [OK]
button is clicked. When the message window is dis-
played by clicking the [OK] button, refer to the page
151 and follow the descriptions.
Note:
When the [OK] button is clicked without performing
the connection test, the recorder registration will
not be completed.
It is impossible to operate the recorder until the
obtained model number using the connection test
is registered. A message will be displayed when
trying to operate without completing the...

126
Perform the settings of all the cameras
connected to the recorder
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder and select
Camera setup(C)... from the displayed pop-up menu.
The Camera setup window will be displayed.
d
!0o
q
w
e
r
ND300
!0o
i
tyu
q
w
e
r
HD300
Perform the following settings:
qRecorder title
The title of the...

127
rTitle
Enter the name of the camera. The default title is
CAM# (#: camera channel).
Enter up to 16 alphanumeric characters. The fol-
lowing characters are not available (\, /, :, *, ?, , , |). 
tModel number 
The model number obtained from the recorder at
the connection test will be displayed. For a camera
channel to which no camera is assigned, -- will be
displayed.
(However, this function will not work when the ver-
sion of the recorder in use is the following. Refer to
the operating instructions...

Step 3
Right click the icon of the desired camera.
Changing the camera type 
1. Select Change camera type(T) from the displayed
pop-up menu.
The pop-up menu will be displayed.
2. Select PTZ Camera(P) or Fixed Camera(F) from
the submenu.
Changing the camera title
1. Select Rename(R) from the displayed pop-up
menu. The selected camera title will be highlighted
and can now be edited.
2. Enter the new name for the camera title.
HD300
128
Perform the settings of the cameras
independently
Step 1
Display the...

129
Edit the registered recorder information
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder for which
the registered information is to be edited and select
Edit (E)... from the displayed pop-up menu.
The recorder registration window will be displayed.
Step 4
Edit the registered information and click the [OK] but-
ton.
The edited...

130
Delete the registered recorder information
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder and select
Delete(D)... from the displayed pop-up menu.
The deletion confirmation window will be displayed.
Step 4
After reading the message in the window, click the
[Yes] button to delete the selected recorder.
Deletion of the selected...