Panasonic Digital Video Cassette Recorder AG DV2000P Operating Instructions

Select Start Assemble to start editing,
and then press OK.
Editing begins after the playback unit and the
recording VCR both rewind their tapes to the edit
start points.
After completing editing, select Review,
and then press OK.
The edited pictures are played back.
To interrupt editing or Review:
Press EDIT MENU.
Notes:
The Preview function cannot be used with the Assemble
function.
Up to ±1 second of slight deviation in the specified edit
start/end position can be corrected. See pages 62-63 for
Edit...

Program Insert
This function is used to replace the picture and sound on a recorded tape.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Example: Video Insert
Operations
Press EDIT MENU.
On Screen Display
Select  Program Editing,  and then
Press OK.
Notes:
Program Editing can be performed using either the tape
counter or Time code display.
If you attempt to switch to the tape counter display in order to
perform editing after setting the editing points using the Time
code...

Select the desired editing operation, and
then press OK.
To insert picture: Video Insert.
To insert sound: Audio Insert.
To insert picture and sound: AV Insert.
Press PLAYER and JOG/SHUTTLE.
The picture from the playback unit appears on the
screen.
Search for the edit start point on the
playback unit and press MARK IN.
Search for the edit end point on the
playback unit and press MARK OUT.
(Continued on next page)
AV Insert is not possible in the following cases:
When the tape in the recording VCR (this...

Program Insert (continued)
Press RECORDER  and JOG/
SHUTTLE.
The picture from the recording VCR appears on the
screen.
On Screen Display
Search for the edit start point on the
recording VCR and press  MARK IN.
Press OK.
To check and change programs:
Select Confirm/Change  and then press OK.
To confirm, change, insert or erase editing programs,
see pages 60-61.
To continue setting programs:
1  Press  EDIT MENU.
2  Press  PLAYER.
3  Using
select the program number.
The program number changes each time...

Select Preview to confirm the editing
operation before performing actual
editing, and then press OK.
Preview begins after the playback unit and the
recording VCR both rewind their tapes to the edit
start points.
Select Start Insert to start editing, and
then press OK.
Editing begins after the playback unit and the
recording VCR both rewind their tapes to the edit
start points.
After completing editing, select Review,
and then press OK.
The edited pictures are played back.
To interrupt editing, Preview or...

Program Audio Dubbing
This function is used to add new sound on the STEREO2 track of previously recorded tape.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Operations
Press EDIT MENU.
On Screen Display
Select  Program Editing,  and then
Press OK.
Notes:
Program Editing can be performed using either the tape
counter or Time code display.
If you attempt to switch to the tape counter display in order
to perform editing after setting the editing points using the
Time code...

Select Audio Dubbing, and then press
OK.
Press PLAYER and JOG/SHUTTLE.
The picture from the playback unit appears on the
screen.
Search for the edit start point on the
playback unit and press MARK IN.
Search for the edit end point on the
playback unit and press MARK OUT.
(Continued on next page)
Notes on editing point setting
The Program Insert and Audio Dubbing functions require
the setting of only three editing points: the in and out points
on the playback unit and the in point on the recording unit,...

Program Audio Dubbing (continued)
Press RECORDER  and JOG/
SHUTTLE.
The picture from the recording VCR appears on the
screen.
Search for the edit start point on the
recording VCR and press  MARK IN.
Press OK.
To check and change programs:
Select Confirm/Change  and then press OK.
To confirm, change, insert or erase editing programs,
see pages 60-61.
To continue setting programs:
1  Press  EDIT MENU.
2  Press  PLAYER.
3  Using
select the program number.
The program number changes each time these buttons...

Select Preview to confirm the editing
operation before performing actual
editing, and then press OK.
Preview begins after the playback unit and the
recording VCR both rewind their tapes to the edit
start points.
Select Start Dubbing to start editing,
and then press OK.
Editing begins after the playback unit and the
recording VCR both rewind their tapes to the edit
start points.
After completing editing, select Review,
and then press OK.
The edited sounds are played back.
To interrupt editing, Preview or...

Other Editing Functions
These functions are used to confirm, change, etc. programs.
Once all program settings are completed, the screen
shown at right is displayed.
Example: Video Insert
This portion varies,
depending on the
editing function that
was programed.
On Screen Display
To check/change programs:
1  Select  Confirm/Change,  and then press OK.
The program list for the playback unit is displayed.
To check the program list for the recording unit, press
RECORDER.
To just confirm the program settings,...