Panasonic Digital Video Cassette Recorder AG DV2000P Operating Instructions

One-Touch-EditAV-IN Color Level
1Press SET UP.1Press SET UP.
2
 Select  One-Touch-Edit.
On Screen Display
2Select AV-IN Color Level.
3Select OFF or ON.3Select SOURCE or ADJUST.
OFF:Select this whenever you are performing anySOURCE:Normally set this position.
editing function other than One-Touch-Edit. ADJUST:
To adjust the color level of the input
ON:Select this in order to perform One-Touch-Edit. external recording source connected to A1
or A2.
One-Touch-Edit is possible only when 
EDIT CONTROL
is set...

AV-IN Hue Level
1Press SET UP.
2Select AV-IN Hue Level.
Counter Adjustment
1Press SET UP.
2Select Counter Adjust.
3Select ON or OFF.
3Select SOURCE or ADJUST.
SOURCE:Normally set this position.
ADJUST: To adjust the hue level of the input external
recording source connected to A1 or A2.
If you select 
ADJUST and then press OK, the AV-IN Hue
Level screen is displayed.
ON:When the counter mode of the connected unit is
set to “DV Time code”.
OFF:When a non-digital video equipment is connected.
Also use this...

Creating the Tapes For Editing
In order to operate editing functions correctly, use these tapes
for editing as follows:
Tape on which the picture and sound have been recorded properly for about 20
seconds prior to the edit start point: [Playback unit] [Recording unit]
This VCR first rewinds the tape to the section prior to the edit start point and then
commences editing. For this reason, accurate editing cannot be performed if the tape
has been left blank or if the picture and sound have not been...

Editing when Not Using an Edit Cable
To connect a VCR or Movie Camera without an Edit Socket and use this unit as the Recording VCR.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Connect the INPUT1 or AV2 on this unit to the playback
unit.
Set INPUT SELECT on this VCR.
A1:Through the INPUT1 sockets.
A2:Through the AV2 sockets.
If the playback unit has a DV terminal, connect to the DV IN/
OUT on this unit with a DV cable.
Operations
Using the controls on the playback unit,...

Press PAUSE/SLOW on this unit and
start playback on the playback unit
simultaneously.
Editing begins.
Press(STOP) on this unit, and then
press STOP on playback unit to stop
editing.
Notes:
Although Copying can be performed in LP mode, Insert and
Audio Dubbing cannot be performed with a tape recorded in
LP mode. It is necessary to first copy the tape in SP mode.
Video Insert and Audio Insert are not possible in the
following cases:
When the tape in the recording VCR (this unit) is:
Recorded in LP mode:...

One-Touch Assemble
If the One-Touch Edit function is used, Assemble editing can be performed by controlling the playback unit through this unit.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Set 
One-Touch-Edit to ON on SET UP menu.
Operations
Press JOG/SHUTTLE on this
unit, and check that the button
is lit.
Search for the edit start point on this
unit.
Search for the edit start point on the
playback unit using Jog dial and
Shuttle Ring on this unit.
Press JOG/SHUTTLE on...

Notes:
Although Assemble editing can be performed in LP mode,
Insert, Audio Dubbing, and Audio Mixing cannot be
performed with a tape recorded in LP mode. It is necessary
to first copy the tape in SP mode.
In order to ensure that the editing operation is performed
properly, the editing points should be set at least 20
seconds after the beginning of the tape.
When using the editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE turns
off after one minute.
If JOG/SHUTTLE...

One-Touch Insert/Audio Dubbing
If the One-Touch Edit function is used, Insert (Video Insert, Audio Insert, and AV Insert) and Audio Dubbing can be pe\
rformed
by controlling the playback unit through this unit.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Set to 
One-Touch-Edit ON on SET UP menu.
Operations
Press JOG/SHUTTLE  on this unit, and
check that the button is lit.
Search for the edit start point on this
unit.
Press the button for the editing mode on
this unit.
To...

Search for the edit start point on the 

One-Touch Audio Mixing
This function is used to mix the audio on STEREO1, which has already been recorded, with audio from a external recording\
source (A1 or A2), and record the result on STEREO2.
This function is useful for adding new audio, such as music or a narration, to the original audio which has already been\
recorded.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Set to 
One-Touch-Edit ON on SET UP menu.
Operations
Press JOG/SHUTTLE  on this
unit, and check that...