Panasonic Digital Imaging Systems For Copy And Network Scan Functions Dp 8032 Operating Instructions

21
Getting To  KnowYour Machine
Staple Case
New
1
2
Empty
1
2
3
Jammed
Staple
Staple Cartridge
FQ-SS32
When the Staple jams
● The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
Confirm Staple Unit
3
6
45
Code Check Points
U13 Low Toner.
U14 Toner Waste Container is full.
U15 Toner Waste Container is not installed.
U16 Call your Service provider.
U18 Total Count reached the limit, consult with your
Key Operator.
Code Check Points
U20 ADF Cover is open.
U21 ADF is opened...

22
Getting To  Know Your  Machine
Operation Chart
■
■ ■
■
■  Problem Solving (Continued)
●
● ●
●
●  Removing a Misfed Paper (Paper Entry Area/1st Paper Tray)
Right Cover
Misfed Paper
Right Cover
12
6
●
● ●
●
●  Removing a Misfed Paper (Paper Transport Area)
When the optional Tray/1-Bin
Finisher is installed.12Push
Latch
Misfed Paper
12
●
● ●
●
●  Removing a Misfed Paper (Automatic Duplex Unit)
Right Cover
Paper Feed Guide
12 

23
Getting To  KnowYour Machine
Heat Roller Cover
1
3
2
1
2
Paper Tray
3
6
45
∗ Confirm that the latch is securely fastened.
Misfed Paper
Latch ∗
Transport Cover
Right Paper Cleaning
Knob
34
Misfed Paper
1
2
Right Cover
34 

24
Getting To  Know Your  Machine
Operation Chart
■
■ ■
■
■  Problem Solving (Continued)
●
● ●
●
●  Removing a Misfed Paper (2nd/3rd/4th Paper Tray)
Options
3rd Paper Tray (DA-DS305)
4th Paper Tray (DA-DS306)
1
2
Feed Cover
1
2
Paper Tray
12
●
● ●
●
●  Removing a Misfed Paper (ADF)
●
● ●
●
●  Removing a Misfed Paper (1-Bin Finisher)
ADF CoverMisfed Paper
Exit UnitADF Tray
Finisher
Release ButtonMisfed PaperOption (DA-FS300)
12
67
12 

25
Getting To  KnowYour Machine
Feed Cover
34
ADF TrayExit Unit
Misfed Paper
1
2
Misfed Paper
Remaining
Copies
Upper Cover
1
Misfed Paper
32
FinisherNOTE:
If the misfeed indicator(s) do not clear,
open the upper cover and remove all
misfed paper.
When using the Staple Sort, Shift-Sort,
or Shift-Group mode,  remove the
remaining copies on the staple tray.
Then the copy job will restart.
3
6
45
89
3
10
Close the ADF Cover 

26
memo 

27
Before Starting
Before Starting
DP-8032
1234567
1089
Contents
COPY Key
●  To use the unit as a photocopier.
ENERGY SAVER Key
●  Saves power while the copier is not in use.
INTERRUPT Key
●  Interrupts other copy, or print jobs while making copies.
FUNCTION Key
●  Use when changing the paper size, initial function values (default values), and key operator settings.
RESET Key
●  Resets all features to the initial power-on state.
CLEAR Key
●
● ●
●
●  Clears the copy count in the display.
STOP Key
●...

28
Before Starting
Touch Panel Display
12345910
222423
12
15
16
20
21
17
18
28
27
26
25
29
13
14
118
67
19
DP-8032
NOTE●Use only soft finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
● Touch Panel Display Brightness Adjustment:
To adjust the brightness of the Touch Panel display, press and while holding down the   C
(CLEAR) key, keep pressing the   ORIGINAL SIZE/LEDGER or the  COPY SIZE/LEDGER 
keys until the...

29
Before Starting
Contents See Page
Warning Indications 17-21
      : Add Toner        : Add Paper     : Call Service (Call your Service Provider)      : Waste Toner
Original Icon —
Original Size Indication—
Job Build and SADF/Multi-Size Feed Mode Indication 46 and 47
Rotate Mode Indication—
Number of Copies / Original(s) —
Machine / User Error Code Indication 20 and 21
Copy Icon—
Copy Size Indication—
Reserve a Job Button67
Finisher Functions Indication49
Machine  Outline  with Tray  Selection  (Paper...

30
Making Copies
Basic Menu
■
■ ■
■
■  Copying the Same Size Originals (1:1)
100%
If set to other
function mode
or
If the original size
is not detected
correctly
■
■ ■
■
■  Using the ADF
ADF
Upper Limit
Indicator
Upper Limit Guide
Set the originals up to the
upper limit indicator/Guide.
ADF Tray
Original Guides
Adjust to the original’s width
■
■ ■
■
■  Copying on Heavy Paper (Post Cards, etc.) (35 lb max.)
Load paper
on the Sheet
Bypass
Select Sheet Bypass, and
touch the Size Change button
34
Select...