Panasonic Digital Imaging Systems Dp 2310 Copier Adn Scaner Operating Instructions

							51
Function
Copier Settings:Changing the Initial Copy Modes
●Default function of each copy mode
(See pages 52 and 53)
For Key Operator:
Paper size priority, Original mode, Contrast, Job Build
and SADF mode, Original size of Manual Skyshot
mode, etc.
(See page 57)
Printer Settings:Changing the Initial Printer Modes
●Default function of each print mode
(See page 54)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data holding, etc.
(See page 58)

Scanner Settings:
Changing the Initial Scanner Modes
●Original mode, Compression mode, Resolution, Job
Build and SADF mode, Address book, etc.
(See page 53)
●The Completion Notice will work for other modes (i.e.
Copy, etc.) even if the Scanner Option not installed.
Fax/Email Settings:Changing the Initial Fax/Email (i-FAX) Modes
Refer to Operating Instructions (For Fax/Internet Fax
function).
When the Key Operator Mode:
Identification Code
(4-digit)
Setting the Function Parameter
Set the desired Function
Parameter(s).
456 
						

							52
Function
■ General Settings
Screen
No.
00 Power On Default Mode Selects mode. Copy
●Copy, Printer, Scanner∗
, Fax∗
/Email∗
01 Manual Copy Quality Adj Sets to activate the manual density control. Off
●Off, On
02 Manual Add Toner Adds toner manually. Off
●Off, On
03 Sort Memory Status Indicates the sorting memory status. Off
●Off, On
04 Departmental Counter Indicates the department counter.
Consult with an
authorized service
provider
09 Key Operator Mode Input the Key Operator ID Code.
Modes FunctionInitial
Setting
01/02
02/02
■ Copier Settings
Screen
No.
00 Margin Value Default Selects the margin shift value. 10 mm
●5 mm, 10 mm, 15 mm, 20 mm
01 Edge Value Default Selects the edge width. 5 mm
●5 mm, 10 mm, 15 mm, 20 mm
02 Book Value Default Selects the book void width. 20 mm
●15 mm, 20 mm, 25 mm, 30 mm
03 Margin Reduction Def. Selects the reduction ratio in margin mode. No
●No, Yes
04 2-Sided Mode Default Function sets the duplex priority mode. No
●No, 1 to 2, 2 to 2, Book to 2
05  N in 1 Default Mode Selects the N in 1 default mode 2 in 1
●2 in 1, 4 in 1, 6 in 1
06 Reduce N in 1 For Space Selects whether to disable edge deletion No
●No, Yes
07  Booklet Default Mag. Selects the booklet magnification Reduce
●100%, Reduce
08 Digital Skyshot Mode Enables or disables the use of Skyshot mode. Normal
●No, Normal, Quality
09 Manual Skyshot Mode Enables or disables the use of Manual Skyshot. Off
●Off, M1 On, M2 On, M1&M2 On Modes FunctionInitial
Setting
01/04
02/04
∗When the optional Network Scaner Module/Fax
Communication Board is installed. 
						

							53
Function
■ Copier Settings
Screen
No.
10 Auto Contrast Adjust. Automatically adjusts the copy density for text, Yes
T/P.
●No, Yes
11 Sort Priority ADF Selects the sort mode. Sort
●None (Non-Sort), Sort, Shift∗
, Staple∗
, Group∗
12 Sort Priority Glass Selects the sort mode. None
●None (Non-Sort), Sort, Shift∗
, Staple∗
, Group∗
13 Stamping Default Mode Selects the stamping mode. Page
●Page, Date, Issue
14 Page Numbering Style Selects the page numbering style. -n-
●-n-, n/m
15 Imag. Repeat Dotted Line Selects the dotted line. Print
●None, Print
19 Key Operator Mode Input Key Operator ID Code.Modes FunctionInitial
Setting
03/04
04/04
■ Scanner Settings
Screen
No.
00 Scanner Settings Print To print scanner settings. Start
●Stop, Start
01 Original Mode Default Sets the original setting. T/P
●Text, T/P (Text/Photo), Photo
02 Compression Mode Def. Sets the compression mode setting. JBIG
●MH, MR, MMR, JBIG
03 Resolution Default Sets the resolution setting. 600 dpi
●150 dpi, 300 dpi, 600 dpi
04 Job Build and SADF Mode Sets the Job Build and SADF mode initial No
setting.
●No, Yes
05 Bind Edge 2-Side Orig. Sets the bind position, 2-sided original initial Long
setting.
●Long, Short
06 Add New Address To add new address. 0,0,0,0
●PC, DD, FTP
07 Edit Address Book To edit address book. (See page 68)
08 Delete Address To delete address.
Modes FunctionInitial
Setting
01/02
02/02
∗Shift, Staple and Group modes are available when
the optional 1-Bin Finisher is installed and the
Outer is selected with the touch panel display. 
						

							54
Function
■ Printer Settings
Screen
No.
00 Number of Prints Sets the initial number of prints. 1
●1 ~ 999
01 Paper Size Sets the paper size setting. LETTER
●A3, B4, A4, B5, A5, LEDGER, LEGAL,
LETTER, INVOICE, 8 x 13, 8.5 x 13
02 Paper Tray Sets the Paper Tray setting. Auto
●Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4
03 Print Direction Sets the print direction setting. Portrait
●Portrait, Landscape
04 Auto Tray Selection Sets the auto tray setting. On
●Off, On
05 2-Sided Print Sets the 2-sided print setting. Off
●Off, On
06 Bind Edge Sets the bind position. Long
●Long, Short
07 Resolution Sets the resolution setting. 600 x 600
●1200 x 600, 600 x 600, 300 x 300
08 Font (PCL) Sets the PCL font. 0
●0 ~ 99
09 Symbol Table (PCL) Sets PCL symbol table. 11
●0 ~ 35
10 Pitch (PCL) Sets the PCL pitch. 10.00
●0.44 - 99.99
11 Point Size (PCL) Sets PCL point size. 012.00
●4.00 - 999.75
12 Lines/Page (PCL) Sets PCL lines/page. 60
●5 - 123
13 Return Character (PCL) Sets PCL return character. CR
●CR, CR + LF
14 Mutual A4/LTR Converts A4 to Letter automatically. Off
●Off, On
15 Mailbox Memory Status Indicates the mailbox memory status.
●Memory, Box
16 Print Data Sets print data. Start
●Stop, Start
19 Key Operator Mode Input the Key Operator ID Code.
Modes FunctionInitial
Setting
01/04
02/04
03/04
04/04 
						

							55
Function
■ General Settings
Screen
No.
00 Print General Settings Prints the initial user settings of the common menu. Start
●Stop, Start
01 Paper Size Sets the paper size of each Paper Tray. Consult with an
●Ledger, Legal, Letter, Letter-R, Invoice, authorized service
A3, B4, A4, A4R, B5, B5R, A5, A5R, 8 x 13, provider
8.5 x 13
02 A4R/A5 Size Selection Sets the Sheet Bypass initial paper size. A4R
●A4R, A5
03 B5R/A5R Selection Sets the Sheet Bypass initial paper size. B5R
●B5R, A5R
04 Special Paper Tray 1 Sets the Paper Tray for special paper None
(ex: colored).
●
None, Paper Tray 1, Paper Tray 2, Paper Tray
3, Paper Tray 4, Sheet Bypass
05 Special Paper Tray 2 Sets the Paper Tray for special paper None
(ex: colored).
●
None, Paper Tray 1, Paper Tray 2, Paper Tray
3, Paper Tray 4, Sheet Bypass
06 Auto Paper Out Rotate Copier will automatically rotate image and print Off
when the selected Paper Tray is empty.
●Off, On
07 Copy Output Tray Sets the output Copy Tray. Inner 1
●Inner 1, Inner 2, Outer
08 Printer Output Tray Sets the output Printer Tray. Inner 1
●Inner 1, Inner 2, Outer
09 Fax/Email Output Tray Sets the output Fax/Internet Fax Tray. Inner 1
●Inner 1, Inner 2, Outer
10 Auto Reset Time Sets the Control Panel reset time. 1 min.
●None, 30 sec., 1 min., 2 min., 3 min., 4 min.
11 Power Save Mode Timer Sets the Power Save timer. 15
●1 - 240 minutes
12 Sleep/Shutdown Select Sets the Sleep/Shutdown mode. Sleep
●Sleep, Shutdown
13 Sleep/Shutdown Timer Sets the Sleep/Shutdown timer. 15
●None, 1 - 240 minutes
14 Language Sel. Priority Selects the display message language. Off
●Off, On
15 Language Default Selects the display message language. English
●English, C. French, Spanish
16 TCH Panel Beep Sound Beep sound when the panel is touched. Soft
●Off, Soft, Loud
17 Original Set Beep Sound Beep sound when original is set on the platen. No
●No, Yes
18 Orig. Set In ADF Sound Beep sound when original is set in the ADF. Yes
●No, Yes
19 Dept. Counter Mode Monitors copy usage of each department Consult with an
(1) Printer usage of each document authorized service
(2) Print limit of each department provider
(3) ID code of each department Modes FunctionInitial
Setting
01/08
02/08
03/08
04/08
NOTE●The Key Operator ID Code is required before any changes can be made to items on this page.
For Key Operator 
						

							56
Function
■ General Settings
Screen
No.
20 Date Time Setting Sets the registered date and time.
●Month, Day, Year, Time
21 Weekly Timer Sets the weekly On/Off timer. Off
●Off, On (Set)
22 Daylight Time Sets the daylight time. Yes
●No, Yes
23 DHCP Default Sets the DHCP. Yes
●No, Yes
24 TCP/IP Address Sets user IP address.∗∗
   0.   0.   0.   0
●3 digits x 4
25 TCP/IP Subnet Mask Sets the subnet mask.∗∗
   0.   0.   0.   0
●3 digits x 4
26 TCP/IP Default Gateway Sets the gateway address.∗∗
   0.   0.   0.   0
●3 digits x 4
27 DNS Server Address Sets the DNS server.∗∗
Ye s
●No, Yes
28 MAC Address Indicates the MAC address.
29 Hard Disk Format∗Selects the HDD format Stop
●Stop, Start
30 Hard Disk Error Check Selects the HDD error check Stop
●Stop, Start
31 Address Book Group ID Inputs address book group ID. 0
●0 ~ 99
32 Tandem User Parameter Inputs the Tandem User Parameter.
33 Community Name (1) Selects to change the SNMP of Community public
Name (1).∗∗
●Enables read only.
34 Community Name (2) Selects to change the SNMP of Community public
Name (2).∗∗
●Enables read/write.
35 Device Name Input the device name when required.∗∗
Panasonic
(For Status Monitor/EtherTalk Machine Name)DP-2310 or DP-3010
36 Device Location Input the device location when required.∗∗
(For Status Monitor) Modes FunctionInitial
Setting
05/08
06/08
07/08
08/08
NOTE●The Key Operator ID Code is required before any changes can be made to items on this
page.
∗Not required in copying mode, but needed when installing options with advanced functions
(See page 65).
∗∗When functions No. 24 to 27 and No. 33 to 36 are set, cycle the power by turning the Power
Switch on the Left Side of the machine OFF and ON.
For Key Operator 
						

							57
Function
■ Copier Settings
Screen
No.
00 Copier Settings Print Prints the copier settings. Start
●Stop, Start
01 Paper Size Priority Selects paper size priority LETTER
●LEDGER, LEGAL, LETTER, LETTER-R,
INVOICE, A3, B4, A4, A4-R, B5, B5-R, A5,
A5-R, 8 x 13, 8.5 x 13
02 Original Mode Default Selects original setting T/P
●Text, T/P (Text/Photo), Photo
03 Text Contrast Selects contrast for Text mode 4
●1 ~ 7
04 T/P Contrast Selects contrast for Text/Photo mode 4
●1 ~ 7
05 Photo Contrast Selects contrast for Photo mode 4
●1 ~ 7
06 Overlay Contrast Sets the density (transparency) of the page 4
being produced in overlay mode.
●1 ~ 7
07 Interleaving Default Selects OHP interleaving paper Blank
●Blank, Copy
08 Page Insertion Default Selects page insertion Blank
●Blank, Copy
09 Cover Mode Default Selects cover paper F, Blank
●F, Blank, F, Copy
FB, Blank, FB, Copy
(F: Front, FB: Front + Back)
10 Job Build And SADF Mode Enables or disables the SADF function. Yes
●No, Yes
11 Maximum Copy Setting Determines whether to limit number of copies 0
(0-99). (No limit)
12 M1, Size Inputs the frequently used size in job memory 1. 70 x 160 mm
●X: 5~432/Y: 5~297 mm (X)    (Y)
(See page 46)
13 M2, Size Inputs the frequently used size in job memory 2. 95 x 220 mm
●X: 5~432/Y: 5~297 mm (X)    (Y)
(See page 46)
14 Memory Overflow Warning Selects performed task when the memory Print
overflow occurs
●Print, Cancel
15 Add New Tandem Desti. Inputs a new destination to split the copy job
16 Edit Tandem Destination Edits a copy destination
17 Delete Tandem Desti. Deletes a copy destination
Modes FunctionInitial
Setting
01/04
02/04
03/04
04/04
NOTE●The Key Operator ID Code is required before any changes can be made to items on
this page. 
						

							58
Function
■ Printer Settings
Screen
No.
00 Printer Settings Print Sets the printer status printout. Start
●Stop, Start
01 Job Completion Time Sets the job completion time setting. 180
●1~ 999 sec.
02 Page Protection Compress automatically then printout. Off
●Off, On
03 Error Page Print Sets the error page printout. On
●Off, On
04 Spool Function Sets the spool function. On
●Off, On
05 Text Print Prints text page only. On
●Off, On
06 PS Configuration Print Sets the status page print of PS. Start
●Stop, Start
07 Font List Print (PCL) Sets the font list print of PCL. Start
●Stop, Start
08 Font List Print (PS) Sets the font list of PS. Start
●Stop, Start
09 Mailbox Data Holding Sets the automatic holding function of mailbox 7 days
data.∗
●Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
7 days
10 Delete Mailbox Data Sets delete the mailbox data.∗
Before
●All, Before
11 Print Queue Delete Sets authorization to delete the print queue. Key op.
●Free, Key op. (operator)
12 AppleTalk Zone Name Inputs an AppleTalk Zone name.∗∗
●Maximum 32 characters Modes FunctionInitial
Setting
01/03
02/03
03/03
For Key Operator
NOTE●The Key Operator ID Code is required before any changes can be made to items on this
page.
∗Functions 09 and 10 are available when optional Hard Disk Drive (DA-HD30) is installed.
∗∗When function No. 12 is set, cycle the power by turning the Power Switch on the Left Side of
the machine OFF and ON. 
						

							59
Function
MEMO 
						

							60
Function
For Example
■ Changing the Auto Contrast Setting
You can select whether to automatically adjust the copying density for Text and Photo originals.
Scroll to
03/04
■ Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter-R, Legal and Ledger Size paper.
Paper Tray
Paper Size
■ Weekly Timer
Key Operator can administer the Weekly Timer. On/Off weekly timers.
End timeInput time
   Ex.: 0800
Start time
Scroll to
02/02
Scroll to
02/02
123
678
123
678
123
9