Panasonic Digital Imaging Systems Dp 2310 Copier Adn Scaner Operating Instructions

							21
Before Starting
Contents See Page
Warning Indications10 - 13
      : Add Toner        : Add Paper     : Call Service (Call your Service Provider)      : Waste Toner
Original Icon—
Original Size Indication—
Job Build and SADF/Multi-Size Feed Mode Indication 34, 35
Rotate Mode Indication—
Number of Copies / Original(s) —
Machine / User Error Code Indication (E1-01, U13, etc.) 12, 13
Copy Icon—
Copy Size Indication—
Reserve a Job Button49
Finisher Functions Indication37
Machine Outline with Tray Selection (Paper Tray and Output Tray) —
Paper Level and Size Indication —
Paper Tray Selection Button—
Tandem/Remote Button Indication 25
Tandem/Remote Button25
Output Tray Indication11
Output Tray Button11
Density Indicator (7 steps)11, 23
Manual Exposure Select Buttons (Lighter and Darker) 11, 23
Original Mode Select Button (Text; Text / Photo; Photo) 11, 23
Copy Image and Paper Image Indication —
Copy Ratio Indication—
Original Image Indication—
Completion Notice Button29
Job Queue Button28
Job Settings Button—
•Selected copy jobs will be indicated on the right side of the touch panel display.
(2-Sided/Original → Copy, Sort/Finish, Zoom/Effects, Insertion/Overlay modes)
Proof Set Button25
Function Categories—
■ Touch Panel Display Indications
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29 
						

							22
Making Copies
Basic Menu
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
100%
If set in other
function mode or
If original size
is not detected
■ Using the ADF
Inappropriate Originals
●Paper with a smooth surface such as glossy
and coated papers
●Transparencies
●Originals with a Lead Edge that is “creased”,
“folded”, “punched” or “glued”
●Paste-ups
●Pressure sensitive or carbon backed papers
●Paper with excessive curl
●Stapled originals
●Freshly printed copies from a laser printer
ADF
Upper Limit
Indicator
Set the originals up to the upper limit indicatorADF Tray
Original Guides
Adjust to the original’s width
NOTE●During the copy operation and after making copies, the fan motor may start spinning. This is a
normal operation and is used to cool down the copier.
■ Copying on Heavy Paper (Post Cards, etc.) (35 lb max.)
Load paper
on the Sheet
BypassSelect Sheet Bypass and
touch the Size Change button
34
5
Select Heavy Paper
12
123
4 
						

							23
Making Copies
Adjust the Manual Exposure
  or  
Select type of Original(s)
Mainly Text
Text and Photo
combined
Mainly Photo
Number of Copies
(Max. 999)
• Cover
• Page Insertion
• OHP Interleaving
• Presentation
• Overlay
(See pages 44-47)
Features
Automatic Original FeedingDuplex CopyingInsertion/Overlay
2-Sided originals
2 or 1-Sided copy
automatically
(See pages 30 and 31)
Feeds originals automatically
Up to 50 Letter size (20 lb)
(up to 30 Legal or Ledger size)
Automatic original size detection
Invoice to Ledger
NOTE●Memory Capacity:
If the memory becomes full during original scanning, the message  “Cannot Complete / Job
Exceeds Memory Capacity” will be displayed on the LCD. If this occurs, follow the instructions
on the LCD.
When additional memory is required, consult with an authorized service provider.
34
■ Position of the original(s)
From ADF/i-ADF From Platen 
						

							24
Making Copies
Basic Menu
100
copies
50
copies50
copies
+
100 copies
2 1100
■ Copying with Preset Ratios
Letter
Ledger LetterLedger oror
If original size
is not detected
■ Proof Copying
or
Allows you to make one proof set, before
proceeding to copy a large multi-set with
various settings.
Proof copy
Multi copy
Select Copy Job settings
■ Tandem/Remote Copying
or
Requires installation of optional Hard Disk Drive (DA-
HD30) and additional Image Memory (DA-SM16B/
SM64B/SM28B), Network setup (See pages 56 and
62) and Parameter registration. (See page 26)
Select Copy Job settings
Remote Copying
Tandem Copying
Other copier Other copier
This copier
Stationor
NOTE●If the desired copy size is different from the paper size loaded in the Paper Tray, use Sheet
Bypass. (See page 10)
The selected Remote printing copier, must be either DP-2310 or DP-3010.
For the copier to function as a Remote/Tandem Copier it has to be setup in advance.
12
12
12
5 
						

							25
Making Copies
ORIGINALCOPY SIZE
SIZE Ledger Legal Letter-RInvoice-R
Ledger 100 77 65 50
Legal 121 100 79 61
Letter-R 129 100 100 65
Invoice-R200 155 129 100 The Correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Number of Copies
(Max. 999)
Number of Copies
(Max. 999)
If the Proof copy is OK,
the remaining number
of sets will be printed.
If the Proof Copy is NG,
again, place the originals
back on the ADF (or
Platen) and try again. or
Number of Copies
(Max. 999)
NOTE●Press the PROOF SET button again if the Proof Copying mode was reset.
For Tandem
For Remote
34
345
34
5
67 
						

							26
Making Copies
Basic Menu
■ Tandem/Remote Copy Settings (Registration 1)
Input the Key Operator ID Code if required.
Input ID Code
(4-digit)
Enter the key name∗
(up to 15 characters).
∗By default, the key name will
be up to 15 characters of the
station’s name.
■ Tandem/Remote Copy Settings (Registration 2)
If either DP-2310 or DP-3010 is installed
on a Network with a different subnet mask,
the DP-2310 or DP-3010 must be regis-
tered first, before being able to use the
Tandem/Remote Copying function.
Scroll to
04/04
IP Address
Ex: 123.123.12.1
When entering a 1 or 2-digit number
segment, add “00” or “0” in front of the
number, to scroll to the next segment of
numbers or press the “
“ key to enter a
period after the number.
■ Tandem/Remote Copy Settings (Editing)
To edit the registered machine’s settings
(IP Address, machine name or key name).Open the screen
04/04 same as
the Registration
procedures above.
■ Tandem/Remote Copy Settings (Deleting)
To delete the registered machine.Open the screen
04/04, same as
the Registration
procedures above.
1
4
7
12
56
12
12 
						

							27
Making Copies
Scroll to 07/08
To input upper case letter(s).
To input numbers and/or symbols.To move the cursor (_) to the left or right side.
To erase the character before the cursor. Machine name
(up to 15 characters)Scroll to
02/02
Button Names on the Keyboard
Input ID Code
(4-digit)Scroll to
04/04
Enter the machine and key
name, same as the Registration
procedures above.
Select the registered
machine name
Enter the new IP Address,
same as the Registration
procedures above.Enter the machine and key
name, same as the
Registration procedures
above.
Select the registered
machine name
23
4
56
7
34
5
7
345
34
8 
						

							28
Making Copies
Basic Menu
■ Job Queue
Refers to a list of jobs waiting to print, delete
or change of priority (only for print job).
Job
 1
Job
 2
Job
 3
Job 3
Job 1
Job 2
Deleted
Select the job(s)∗
you wish to delete
∗∗
∗You can select to delete multiple/all jobs.
∗∗Priority can be selected for print jobs only
when the optional HDD is installed. Select the job(s)
■ Completion Notice
A Job Completion Notice via a pop up screen on the
Desktop of your PC when the Copy Job is com-
pleted.
Before using the Completion Notice, install the
Panasonic-DMS included with the machine.
Copy is completed.
Pop up screenSelect Pop up
Display
Right click the
Status Monitor icon
or
NOTE●The PRINT JOB QUEUE requires the Key Operator’s Password, however, the COPY JOB
QUEUE does not require a password.
The Job Queue selection function is only available when the optional HDD is installed.
1
4
12 
						

							29
Making Copies
Input password
(4-digit)
2 times
Select the desired
PC AddressNumber
of Copies
NOTE●This Completion Notice is available only when connected to the Network.
To reset the Completion Notice, press the CANCEL button.
23
4
56
345 
						

							30
Making Copies
2-Sided/Original  Copy
■ 1-Sided  2-Sided, 2-Sided  1-Sided, 2-Sided  2-Sided Copy
   1-Sided   2-Sided
Copy
   2-Sided 
 1-Sided
Copy
   2-Sided 
 2-Sided Copy
● Duplex Notice Function
“2-SIDED PRINT” is printed on 1-Sided copy.
or
Reduction/
Enlargement
only
■ Book  2-Sided Copy
   Book  2-Sided Copy
● Duplex Notice Function
“2-SIDED PRINT” is printed on 1-Sided copy.
Reduction/
Enlargement
only (1st Page BLANK)
(1st Page IMAGED)
Platen
Ex : Ledger size original
Letter
LedgerLedger
(1  2 Copy only)
Bottom right
positionUpper right
positionor
12
12
Blank Page
Book Mark∗
∗ ∗∗ ∗
∗Center book by length and
width according to center
marks only for Ledger size.