Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

1
2
3
4
5
6
7
8
9
10
11
12
7-3
Side guide
Approx. 0.5mm Approx. 0.5mm
Side guide
Slide Rail 
Adding Paper to the Drawers
1
Pull the drawer out carefully until it comes to a
stop.
- Be careful not to touch the drawer slide rail.
2
Place the paper in the drawer.
- Place the paper face down.
- Maximum number of sheets that can be set. 
 Page 2-4
- Fan the paper well before placing it in the drawer.
- Do not add paper above the line indicated on the guide.
- Do not use creased, folded, wrinkled or damp...

1
2
3
4
5
6
7
8
9
10
11
12
7-4WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
MAX
Slide Rail 
A
B
1
Pull the tandem LCF out carefully until it comes to
a stop.
- Be careful not to touch the drawer slide rail.
2
Open some packages of paper, take out entire reams
of paper and set them aligned in tray 
A and tray B.
- When setting the paper, set the paper for A to the right
side, and set it for 
B to the left side. (The paper can be
set neatly if you pile it up gradually and alternately in trays
A  and...

1
2
3
4
5
6
7
8
9
10
11
12
7-5
MAX
Slide Rail 
Adding Paper to the External LCF (Large Capacity Feeder) (optional)
1
Pull the external LCF out carefully until it comes to
a stop.
- Be careful not to touch the drawer slide rail.
2
Place the paper on the elevator tray.
- Place the paper face up.
- Maximum number of sheets that can be set 
 Page 2-4
- Fan the paper well, then place it on the elevator tray, aligning
it on the rear guide tray.
- Set the paper so that it does not protrude beyond the line of...

12
3
4
5
6
78
9
10
11
12
7-6WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Here at Panasonic dependable high quality image output is what we do. By using genuine Panasonic
toner you can ensure that you are not only receiving quality output but also output that is friendly to
mother ear th and human beings.
1
Open the front cover.
When the toner bottle runs out of toner, the REPLACE TONER
BOTTLE  
  symbol flashes,
Add toner
This message will appear on the screen.
3. REPLACE TONER BOTTLE    SYMBOL 

1
2
3
4
5
6
7
8
9
10
11
12
7-7
Label (orange)
Shutter (orange)
Holder
2
Rotate the left end of the holder, then pull out the
empty toner bottle with both hands as shown on
the right.
Return used toner bottles to your service technician.
3
Shake the new toner bottle well to loosen the
toner inside.
4
Holding the new toner bottle as shown on the right,
pull out the seal in the direction of the arrow.
5
Match the label (orange) on the machine with the
shutter (orange) on the toner bottle, then insert
the...

1
2
3
4
5
6
7
8
9
10
11
12
7-8WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Type of Originals
A.
B.
C.
A
20,00030,00040,00050,000 60,000 70,00074,000
A
20,00030,000 40,000 46,000
B
20,000 27,00015,000
C
A
20,00030,000 38,000
Replace Toner  Bag
- When the toner bag becomes full of used toner, the
REPLACE TONER BAG  
  symbol flashes. Please call
your service technician to ask to have the used toner bag
replaced with a new one.
Dispose of Used Toner
The life of the toner bottle (number of copies)...

1
2
3
4
5
6
7
8
9
10
11
12
7-9
Reversing Automatic Document Feeder
Inside of the Machine
Bypass Guide
External LCF (Optional)
Hole Punch Unit (Optional)
Finisher (Optional)
Saddle Stitch Unit (Optional) When a paper misfeed occurs in the machine, the  
  or    symbol flashes in the positions where the
paper is misfed. In that case, remove the misfed paper using the following procedure referring to the
illustration below.
4. CLEAR PAPER    SYMBOL 

1
2
3
4
5
6
7
8
9
10
11
12
7-10WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
 Paper Misfeed in the Reversing Automatic Document Feeder
2
Rotate the blue knob to remove any misfed
originals.
1
Push the button on the reversing automatic
document feeder to open the cover.
3
Lift the blue handle (first) as shown on the right.
- If there are any misfed originals, remove them.
4. CLEAR PAPER    SYMBOL (Cont.) 

1
2
3
4
5
6
7
8
9
10
11
12
7-11
7
Lifting the handle in the direction of the arrow, pull
it toward you.
6
Open the original exit tray and remove any misfed
originals.
8
Remove any misfed originals.
5
Lift the original feeding tray and remove any misfed
originals.
4
Lift the blue handle (second) as shown on the right.
- If there are any misfed originals, remove them. 

1
2
3
4
5
6
7
8
9
10
11
12
7-12WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
 Paper Misfeed inside of the Machine
1
Open the paper feed cover.
- When installing the external LCF (Optional), open the paper
cover after doing step 1 of page 7-15.
3
Open the bypass cover.
2
Remove any misfed paper.
4
Remove any misfed paper.
4. CLEAR PAPER    SYMBOL (Cont.)