Panasonic Digital High Definition Plasma Television Th 37px25 Operating Instructions

51
Symptom
Cannot read the content of the card.
PC card cannot be ejected.
Poor picture quality.
Long time to display.
The screen turns black.Cause and remedy
• Not compatible format. Must be formatted with
FAT 12 or FAT 16.
• The extension is not “JPG”.
• The folders not under DCF standard.
Push the card all the way in, and eject.
If the main image cannot be read (the file is
partially corrupted), the Photo Viewer will read the
thumbnail. Please confirm the format of the image.
There are lots of images...

52
  :  smaller                  :  larger
PIP (Picture in Picture) Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
1Press to display the PIP frame.
Notes:
• Audio is from Main picture only.
• PIP frame displays analog channel signal of ANTENNA (A)
only, and cannot display ANTENNA (B) or digital channel
signal.
2
Select the channel....

53
PIP (Picture in Picture) Operation
The input mode changes in PIP frame.
(For analog channels only)
1
2
PIP Frame Press  to select the channel.
• You can also use the numbered buttons.Search frames
TV/VIDEO
   CH #    CH # Comp 1 Comp 2  HDMI
Video 1
Video 2 Video 3
CH10CH11
CH12
CH13
CH
VOL
CHVOL
OK
SEARCHOPEN/CLOSEPress to display search frames.
• Press  again to cancel Search.
Press to position PIP frame to one of the four
corners.
PIP frame
 • Press  again to cancel Freeze.
Main Picture
• Select...

54
CH10CH5
CH5
CH10
SPLIT Operation
This feature lets you watch two different channels side by side with or without an external video source.
1Press to display the SPLIT frame.
Notes:
• Audio is from Main picture only.
• SPLIT frame displays analog channel signal of ANTENNA (A)
only, and cannot display ANTENNA (B) or digital channel
signal.
Select the channel.
Press to select the channel.
• You can also use the numbered buttons.
To cancel the SPLIT operation.
In the Main picture
Main picture Main...

55
CH10
TV/VIDEO
Notes:
• 
The Main picture and the SPLIT frame are processed in the individual circuits, and may have slight difference in image quality.
• You cannot display the same picture in the Main picture and the SPLIT frame at the same time.
• While Main picture freeze frame is displayed, you cannot select or search the channel, swap the pictures, or select the
input mode.
SPLIT Operation
SPLIT frame
 • Press  again to cancel Freeze.
Main Picture
• Select PIP or Split (see page 27, Freeze) when...

56
Aspect Controls
Lets you choose the aspect depending on the format of the received signal and your preference.
Press to change the aspect mode.
Displays a 4:3 picture at its standard 4:3 size with
gray side bars. (It may create an after-image on
screen if displayed for a prolonged period of time.)
Expands a 4:3 picture uniformly (width and height)
to full screen width and then reposition the picture
vertically. (Recommended for letterbox. This will
show picture at full screen size.)
Displays a picture...

57
CH
VOL
CHVOL
OK
PC MENU
1Press to display the PC MENU.
2Press to select  the sub-menu.
Press to display the sub-menu screen.
TV
POWER
VCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
AUX
ASPECT
MUTERECALL
BBE
CH
VOL
CHVOL
OK
MENUEXIT
MENU
CH
VOL
CHVOL
OK
PC MENU
PICTURE
SIGNAL PICTURE POS./SIZE
Press to select the sub sub-menu.
Press to adjust the sub sub-menu.
PICTURE
NORMALIZE
PICTURE  MENU
BRIGHTNESSSTANDARD
0
COLOR  TEMPNORMAL PICTURE25
3
SHARPNESS
NORMAL
Item
PICTURE
BRIGHTNESS
SHARPNESS...

58
Menu
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
(RGB/PC in Mode)
When “” 
button is pressedWhen “” 
button is pressed
Note:
If a “Cue” or “Rew” signal from a VCR or may DVD player is received, the
picture position may shift up or down despite of the PICTURE POS./SIZE
settings.
PC MENU
NORMAL
PICTURE  POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK  PHASE
Flickering and distortion can be eliminated by using the Position Left “
  ” 
or Right “
  ”
button to carry out adjustment.
SIGNAL
SYNC
H
-FREQ....

59
Operating peripheral equipment using the remote control
Programming the remote control code
You can operate other manufacturers’ components using this TV ’s remote control.
Preparation:
• Connect the plug of the external component to the wall outlet.
• Make sure the component is turned off.
1
TVVCRDVD
DBSRCVRCBLAUX
2
POWER
  +  
CH
VOL
CHVOL
OK
123
456
78
0
9
3
Press and hold 
POWER and OK together,  for at
least 5 seconds .
• The mode selection buttons flashes, and then
release the  POWER and OK....

60
Operating peripheral equipment using the remote control
Infrared Code Index
Infrared Remote Codes for Specific Components
Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a
handy reference whenever you need to reprogram your remote control.
CABLE
Cable Box
DBS
Digital Broadcast System
Other Component
Other Component
VCRVideo Cassette Recorder
RCVR
Receiver or Amplifier
Other Component
Other Component
CDCompact Disc Player
LD
Laser Disc...