Panasonic Digital High Definition Plasma Television Th 37px25 Operating Instructions

11
Cable Connection
PC CARD
EJECT SD CARD
PUSH-EJECTOK MENU TV/VIDEO VOLUME CHANNELS-VIDEOPC 
VIDEO
INPUT 3L  AUDIO  R HPJ
S VIDEOPC 
VIDEO
INPUT 3L  AUDIO  RHPJ
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
TO AUDIO
AMPL
RAUDIO INAV IN
VIDEOHDmI
BAANTENNA SERVICE ONLY DIGITAL AUDIO
OUTCABLE CARDCable In
1
2
12
Headphones /
Earphones jack
(see page 17)
Front AV  terminals
(see page 17)
From EXTERNAL monitor terminal
on Computer  (see page 18)
CABLE CARD slot
(see page 14)
DIGITAL...

12
2
2
1
1
1
When connecting to the rear AV input/output
terminals, connect the cables through this window.
Other cables should be connected before fitting
the cable cover.
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
TO AUDIO
AMP
VIDEOThe rear AV input/output terminals
Cable Cover Removal and Fitting
Removal
Fitting
1.  Insert the claws (at 4 points) at the bottom
end.
2.  Push the cover until hooks will be cricked. 1.  Push down hooks and pull the cover slightly
towards yourself to...

13
B        ANTENNA        ACable   In
Cable Connection
Notes:
• Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local cable company for its compatibility requirements.
• To obtain optimum quality picture and sound, an antenna, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
• If a communal antenna system is used, you may require the correct...

14
Cable Connection
This TV is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner Set-Top-Box (STB). This
TV also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image.
This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with
interlaced TV pictures.
• To view DTV programs, connect the STB to the component video input terminals (Y, P
B, PR) of the TV. Component...

15
AV IN
L
RAUDIO IN
Cable Connection
HDMI Connection
HDMI∗1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
To the HDMI∗
1 input terminal, you can connect an EIA/CEA-861/861B∗2 compliant consumer electronic device, such as
a Set Top Box or DVD player with HDMI or DVI output terminal.
Input a High-bandwidth Digital Content Protection (HDCP) high-definition...

16
Cable Connection
VCR Connection
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
VIDEO
TO AUDIO
AMP
OUTPUTAUDIOVIDEO
S VIDEO RL
S-Video cable
Video cable
Audio
cable Back of the TV
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
VIDEO
TO AUDIO
AMP
AUDIO INPUTOPTICAL IN
RLDIGITAL AUDIO
OUT
Notes:
• External speakers cannot be connected directly to TO AUDIO AMP terminals.
• When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital....

17
Cable Connection
PROG OUTCOMPONENT VIDEO INPUT
S VIDEO
VIDEOY
P
B
L
RP
R
1212INPUT
VIDEO
TO AUDIO
AMP
VIDEO
AUDIO
RL
See optional equipment manual for further instructions for recording and monitoring.
Program Out Connection (PROG OUT)
VCR MONITORVideo cable
Audio cableBack of the TV
OR
S VIDEOPC 
VIDEO
INPUT 3L  AUDIO  RHPJ
M3 plug
Headphones /
Earphones
(not supplied)
Connecting Headphones / Earphones
Ferrite core (small size)
(supplied)
S VIDEOPC 
VIDEO
INPUT 3L  AUDIO  R
Push to open the front...

18
Cable Connection
PC Input Terminals Connection
Notes:
(1) Computer signals which can be input are those with a horizontal sc\
anning frequency of 15 to 110 kHz and verticalscanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200
lines.)
(2) The maximum resolution:
If the display resolution exceeds these maximums, it may not be possible\
 to show fine detail with sufficient clarity.
(3) Some PC models cannot be connected to the set.
(4) There is...

19
POWER
POWER
POWER button
Power ON / OFF
Connect the AC cord plug to the Plasma TV.
• Fix the power cord plug securely with the clamper
(see page 11).
2    Connect the plug to the wall outlet. Remote control senser
Power indicater
Power on: Red
Power off: No LightPress to turn the TV on or off.
TVVCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
AUX
ASPECT
R
BBE
POWERNote:
The TV will still consume some power as long as the
power cord is still inserted into the wall outlet.
1
3
The Main Unit
PC CARD...

20
TV
POWER
MENU
R-TUNE
PIP MIN
REWPIP MAX
FF
PLAYPROGEXIT
VCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
456
78
0
9
AUX
ASPECT
MUTERECALL
BBE
STOPPAUSE
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPSEARCHOPEN/CLOSEPIP CH
DVD/VCR CHREC
CH
VOL
CHVOL
OK
The Illuminated Remote Control
COMPONENT 2HDMI TV
COMPONENT 1
VIDEO 3 PC VIDEO 1VIDEO 2
POWER
Turn the TV ON or OFF.
TV/VIDEO
Change the input mode.
SD
Access Photo Viewer (see page 48).
R-TUNE
Switch to previously viewed channel and input modes.
Mode Selection...