Panasonic Digital Disk Recorders Wj Hd500a Operating Instructions

							43
Programming Menu Setup
As shown below, the WJ-HD500 SETUP menu has eight main submenus. Seven of these are further divided into additional
submenus.
The  mark indicates that the item has a submenu for more detailed setups.
TIMER SETTING
RECORDING SETUP
Common Recording
Setup
Group Setup
Program Timer
Sequence Setup
Alarm Port Setting
Video Motion Detector Setting
PS
 • Data Setup
RS-232C Setup
Clock Setup
Time Adjustment Setting
Disk Management
Error Report
System Information Password Lock Setting
Buzzer Setting
User Defined Setting Manual Recording Setup
Timer Recording
Setup
Time Lapse Recording
Multi Shot Recording
Multiscreen Monitor
Spot Monitor One Shot Recording
Emergency Recording
MULTIPLEXER SETUP
ALARM SETUP
Camera Title Setup DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD DRIVE SETUP SETUP
Page 44
Page 45
Page 45
Page 46
Page 48
Page 50
Page 50
Page 52
Page 54
Page 55
Page 56
Page 57
Page 57
Page 57
Page 59
Page 62
Page 62
Page 63
Page 65
Page 65
Page 68
Page 68
Page 70
Page 72
Page 72
Page 73
Page 74
Page 75
Page 75
Page 76
Page 72
Page 73
Page 73 
						

							44
TIMER SETTING
The timer recording mode is triggered by the internal or an
external timer.
This item lets you enable or disable the timer for recording.
1. Move the cursor to the TIMER parameter in the WJ-
HD500 SETUP menu by pressing the Dor Cbutton.
2. Select a parameter to be activated by pressing the +
or -button.
INT:Selects the internal timer for recording as sched-
uled in the programmed menu.
EXT:Selects the external timer for power on recording
when detecting power on and off.
OFF:Timer recording is disabled.
To record manually, set to this mode.
The factory default setting is OFF.
Note:When the parameter is set to something other
than OFF, the Disk Recorder does not start record-
ing even if the REC button is pressed.
WJ-HD500 SETUP                    *.**
TIMER    OFF
REC SETUP
  COMMON SETUP 
  
*MANUAL     WITHOUT AUDIO
  
*TIMER      WITHOUT AUDIO
  
*EMERGENCY  WITHOUT AUDIO
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD 
						

							45
Common Recording Setup
These items let you determine the common recording set-
tings, camera assignment for the groups and playback set-
tings.
1. Move the cursor to COMMON SETUP in the WJ-HD500
SETUP menu by pressing the Dor Cbutton, then
press the SETbutton.
The COMMON SETUP menu as shown below appears
on the Multiscreen Monitor.
2. To select an item or an item parameter from the COM-
MON SETUP menu, move the cursor to the item or item
parameter by pressing the Dor Cbutton.
3. To return to the previous WJ-HD500 SETUP menu,
press the SETUP/ESCbutton.
Recording Quality Setup
These items let you determine the image quality recorded
on the Hard Disk.
Video Pixels (Resolution)
This item lets you select the pixel number (number of hori-
zontal x vertical image elements) or resolution of the video
image.
1. Move the cursor to the FIELD/FRAME parameter in the
COMMON SETUP menu by pressing the Dor Cbut-
ton.
2. Select the desired mode by pressing the +or -but-
ton.
FRAME 3DIM ON:High resolution (720 x 480) distor-
tion-free image
FRAME 3DIM OFF:High resolution (720 x 480) image.
FIELD:Normal resolution (720 x 240) image
The factory default setting is FIELD.
Color Mode Setting
This item lets you enable or disable recording in color or
black and white.
1. Move the cursor to the COLOR MODE parameter in the
COMMON SETUP menu by pressing the Dor Cbut-
ton.
2. Select the desired mode by pressing the +or -but-
ton.
COLOR FINE:Images are recorded with enhanced col-
ors.
COLOR STD:Images are recorded with normal colors.
B/W:Images are recorded in black-and-white.
The factory default setting is COLOR STD.
Camera Sync Setting
This item lets you determine camera synchronization in the
system.
1. Move the cursor to the CAMERA GENLOCK parameter
on the COMMON SETUP menu by pressing the Dor C
button.
2. Select the desired mode by pressing the +or -but-
ton.
1 COMMON SETUP
REC QUALITY
  FIELD/FRAME    FIELD
  COLOR MODE     COLOR STD
  CAMERA GENLOCK OFF
GROUP SETUP
  CAMERA ASSIGNMENT 
  TITLE 
TITLE EMBEDDED  OFF
TIME EMBEDDED   OFF
THUMBNAIL       8
PLAYBACK MODE   ALL
SHUTTLE SPEED   LOW
HDD DISKEND     STOP
RECORDING SETUP 
						

							46
Group Title Setup
This item lets you edit the group title to be displayed on the
monitor screen.
Each title is composed of 8 alphanumeric characters.
1. Move the cursor to TITLE in the COMMON SETUP menu
by pressing the Dor Cbutton, then press the SETbut-
ton.
The GROUP SETUP (TITLE) menu as shown below
appears on the monitor screen.
2. Move the cursor to the group editing area to be edited
by pressing the Dor Cbutton.
3. Select a character by pressing the +or -button.
The characters shown below can be selected in
sequence.
Numeral:0 1 2 3 4 5 6 7 8 9
Alphabet:A to Z, a to z
Symbols:←→= ?   # $ % & ( ) 
*+ , – . / : ;
Space:•
4. Press the Bbutton to move the cursor to the right, then
select a character by pressing the +or -button.
5. Repeat the above steps 3 and 4 until all characters are
completed for the selected group title.
If a wrong character is selected, move the cursor to the
character to be replaced by pressing the Aor Bbut-
ton, then select a new character by pressing the +or
-button.
6. Repeat the above steps 2 to 5 to edit other group titles.
7. When satisfied with all the group titles, press the
SETUP/ESCbutton to return to the previous COMMON
SETUP menu. ON:Select this mode when the cameras are gen-
locked to the system.
OFF:Select this mode when asynchronous cameras
are used in the system.
The default setting is OFF.
Note:Confirm camera synchronization in the system.
The incorrect setting will cause improper recording.
Group Setup
As described before, the Disk Recorder activates the
recording function of the assigned cameras in four groups
when the TIMER is set to INT (internal).
These items let you determine the camera’s group for
recording.
Camera Assignment
1. Move the cursor to CAMERA ASSIGNMENT in the
COMMON SETUP menu by pressing the Dor Cbut-
tons, then press the SETbutton.
The GROUP SETUP (CAMERA ASSIGNMENT) menu as
shown below appears on the monitor screen.
2. Move the cursor to the group editing area for the cam-
eras by pressing the A, B, Dor Cbuttons.
3. Select a group number (1to 4) to be assigned by
pressing the +or -button.
The factory default setting is 1.
4. Repeat the above step 2 and 3 to assign the group
number for other cameras.
5. When all camera assignments are completed, press the
SETUP/ESCbutton to return to the previous COMMON
SETUP menu.
1-2 GROUP SETUP(TITLE)
GROUP1   G1••••••
GROUP2   G2••••••
GROUP3   G3••••••
GROUP4   G4••••••
1-1 GROUP SETUP(CAMERA ASSIGNMENT)
CAM GROUP   CAM GROUP
  1   1       9   1
  2   1      10   1
  3   1      11   1
  4   1      12   1
  5   1      13   1
  6   1      14   1
  7   1      15   1
  8   1      16   1 
						

							47
Playback Mode Setup
This item lets you select the playback mode according to
the recorded number when the PLAYBACK button is
pressed.
1. Move the cursor to the PLAYBACK MODE parameter in
the COMMON SETUP menu by pressing the Dor C
button.
2. Select the desired mode to be played back by pressing
the +or -button.
ALL:All the records are played back with automatic
switching.
LOOP:Repeats playing back the selected number of
the recording.
ONE:Switches to standby mode for the next operation,
after the selected recording number has been
played back once.
The factory default setting is ALL.
Shuttle Speed Setup
This item lets you select the search speed for playing back
the recorded images when the Shuttle Ring is rotated to
maximum position.
1. Move the cursor to the SHUTTLE SPEED parameter in
the COMMON SETUP menu by pressing the Dor C
button.
2. Select the desired playback mode by pressing the +
or -button.
LOW:Searches record at 5 times speed.
MID:Searches record at 50 times speed
HIGH:Searches record at 100 times speed.
The factory default setting is LOW.
Recording of the Title Display
This item lets you enable or disable recording of the cam-
era and group titles with the image on the Hard Disk.
1. Move the cursor to the TITLE EMBEDDED parameter in
the COMMON SETUP menu by pressing the Dor C
button.
2. Select either ON or OFF by pressing the +or -but-
ton.
ON:Enables recording of the titles on the Hard Disk.
OFF:Disables recording of the titles on the Hard Disk.
The factory default setting is OFF.
Recording of the Clock Display
This item lets you enable or disable recording of the clock
(date and time) with the image on the Hard Disk.
1. Move the cursor to the TIME EMBEDDED parameter in
the COMMON SETUP menu by pressing the Dor C
button.
2. Select either ON or OFF by pressing the +or -but-
ton.
ON:Enables recording of the clock on the Hard Disk.
OFF:Disables recording of the clock on the Hard Disk.
The factory default setting is OFF.
Thumbnail Display Setup
This item lets you select the maximum number of thumbnail
images displayed in the search window.
1. Move the cursor to the THUMBNAIL parameter in the
COMMON SETUP menu by pressing the Dor Cbut-
ton.
2. Select either 8 or 16 by pressing the +or -button.
8:Displays a maximum of 8 thumbnail images.
16:Displays a maximum of 16 thumbnail images.
The factory default setting is 8. 
						

							48
Hard Disk End Setup
This item lets you enable or disable uninterrupted recording
when the hard disk space is used up.
1. Move the cursor to the HDD DISKEND parameter in the
COMMON SETUP menu by pressing the Dor Cbut-
ton.
2. Select the desired mode by pressing the +or -but-
ton.
STOP:Stops recording when the disk is full.
CONTINUE:Continues recording by overwriting the
oldest data when the disk is full.
ALM CONTINUE:Continues only recording the data
while an alarm is activated by overwriting the oldest
data, when the disk is full.
The factory default setting is STOP.
Manual Recording Setup
The Disk Recorder can be recorded the images in Time
Lapse recording when the REC button is pressed manually.
Manual Recording is disabled when the TIMER in the setup
menu is set to something other than OFF.
These settings are also valid for External Timer Recording
when the TIMER in the setup menu is set to EXT.
These items let you determine the image quality and active
mode for manual recording.
1. Move the cursor to MANUAL in the WJ-HD500 SETUP
menu by pressing the Dor Cbutton.
2. Pressing the +or -button will toggle the display on
the cursor as shown below.
3. Pressing the SETbutton will call up the MANUAL REC
SETUP menu according to the specified audio function,
as shown below.
4. To return to the previous WJ-HD500 SETUP menu,
press the SETUP/ESCbutton.
Manual Recording Mode Setting
1. Move the cursor to the MANUAL REC MODE parameter
in the MANUAL REC SETUP menu by pressing the Dor
Cbutton.
2. Select the recording time mode to be set by pressing
the +or -button.
SF-✽✽H or SF-A*✽✽H:Selects the recording time
mode in enhanced fine quality.
FQ-✽✽H or FQ-A*✽✽H:Selects the recording time
mode in fine quality.
NQ-✽✽H or NQ-A*✽✽H:Selects the recording time
mode in normal quality.
EX-✽✽H or EX-A*✽✽H:Selects the recording time
mode in extended quality.
SP or SP-A*:Freely selectable
→ MANUAL WITH AUDIO → MANUAL WITHOUT AUDIO →
2 MANUAL REC SETUP(WITHOUT AUDIO)
MANUAL REC MODE         SF- 24H
  REC RATE              7.5FPS
  REC QUALITY           SUPER FINE
EVENT REC MODE          SF- 24H
  REC RATE(MAX)         7.5FPS
  REC QUALITY           SUPER FINE
  DURATION              10S
  DYNAMIC REC           OFF
  REC RATE(BASE)
TRIGGER ACTION SETUP 
						

							49
✽✽indicates the hours for recording time mode:
2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480,
720, 960, 1200, 1440, 2160, 2880, 3600, 4320,
6480, 8640 
(parameter A* indicates recording with audio)
When the parameter SF/FQ/NQ/EX is selected for
recording time, the recording rate and quality are auto-
matically set according to the selected recording time.
Note:It may not be possible to set the recording time,
depending on the remaining storage capacity of the
hard disk.
The factory default setting is SF-24H.
3. If the parameter SP is selected for recording time, move
the cursor to the REC RATE parameter by pressing the
Dor Cbutton, then select a recording rate by pressing
the +or -button.
1 - 60FPS:Records the selected number of freeze
images every second.
0.5FPS:Records a freeze image every 2 seconds.
0.4FPS:Records a freeze image every 2.5 seconds.
0.3FPS:Records a freeze image every 3.3 seconds.
0.2FPS:Records a freeze image every 5 seconds.
0.1FPS:Records a freeze image every 10 seconds.
Notes:
• The maximum recording rate depends on the
selected parameters in the COMMON SETUP menu
as shown in the table.
FIELD/FRAME CAMERA GENLOCK REC RATE
FIELD ON 60FPS
OFF 30FPS
FRAME 3DIM  ON 10FPS
ON OFF 10FPS
FRAME 3DIM  ON 30FPS
OFF OFF 15FPS
• “FPS” indicates field per second or frame per sec-
ond when the FIELD/FRAME parameter is set to
FIELD or FRAME in the menu.
Move the cursor to the REC QUALITY parameter by
pressing the Dor Cbutton, then select a recording
image quality by pressing the +or -button.
SUPER FINE:For enhanced sharpness (Compression
Rate 1/6)
FINE:For fine image quality (Compression Rate 1/10)
NORMAL:For normal image quality (Compression Rate
1/16)
EXTENDED:For extended time recording quality
(Compression Rate 1/25)
The factory default setting is SUPER FINE.
Event Recording (Manual Recording)
These items let you set the recording mode in Time Lapse
Recording when an alarm is received during manual
recording.
1. Move the cursor to the EVENT REC MODE parameter
by pressing the Dor Cbutton, then select a recording
time mode by pressing the +or -button.
The parameters are the same as MANUAL REC MODE.
The factory default setting is SF-24H.
2. Move the cursor to the REC RATE(MAX) parameter by
pressing the Dor Cbutton, then select a recording
rate by pressing the +or -button.
For details refer to REC RATE in this menu.
3. Move the cursor to the REC QUALITY parameter by
pressing the Dor Cbutton, then select a recording
image quality by pressing the +or -button.
For details refer to REC QUALITY in this menu.
4. Move the cursor to the DURATION parameter by press-
ing the Dor Cbutton, then select an alarm recording
duration by pressing the +or -button.
OFF:Disables alarm recording.
2S - 6M:Enables alarm recording for between 2 sec-
onds and 6 minutes.
MANUAL:Enables alarm recording while the alarm sig-
nal is received from the ALARM port.
CONTINUE:Enables alarm recording until the REC
STOP is pressed.
The factory default setting is 10S.
5. Move the cursor to the DYNAMIC REC parameter by
pressing the Dor Cbutton, then select an alarm
recording pattern by pressing the +or -button.
OFF:Records all input images starting from input 1.
ALM-PRI:Records the alarmed input images preferen-
tially over other video inputs.
ALM-ONLY:Records the particular images that have
activated the alarm.
ALM-MULTI:Records multiple alarms adaptively.
The factory default setting is OFF.
6. If the parameter ALM-MULTI is selected for the alarm
recording pattern, move the cursor to the REC
RATE(BASE) parameter by pressing the Dor Cbutton,
then select a recording rate by pressing the +or -
button.
The recording rate can be selected as same as REC
RATE(MAX) maximally. 
						

							50
Alarm Active Mode (Manual
Recording)
This item lets you select the active mode when an alarm is
received during manual recording.
1. Move the cursor to TRIGGER ACTION SETUP in the
MANUAL REC SETUP menu by pressing the Dor C
button, then press the SETbutton.
The TRIGGER ACTION SETUP menu as shown below
appears on the monitor screen.
2. Move the cursor to the active mode editing area for the
camera by pressing the A, B,Cor Dbutton.
3. Select the desired active mode by pressing the +or
-button.
REC+ALM:Enables alarm recording and alarm activa-
tion.
REC:Enables only alarm recording.
The ALARM display on the monitor is disabled.
OFF:Deactivates alarm input. 
The ALARM display on the monitor is also disabled. 
The factory default setting is REC+ALM.
4. Repeat the above steps 2 and 3 to select the active
mode for other cameras.
5. When all camera modes are completed, press the
SETUP/ESCbutton to return to the previous MANUAL
REC SETUP menu.
6. To return to the WJ-HD500 SETUP, press the SETUP/
ESCbutton.
Timer Recording Setup
The Disk Recorder can record the images triggered by the
internal timer.
The internal timer comprises four event times common to
the recording groups, and is programmed in the setup. 
1. Move the cursor to TIMER in the WJ-HD500 SETUP
menu by pressing the Dor Cbutton.
2. Select either audio recording display by pressing the
+or -button, then press the SETbutton.
The TIMER REC SETUP menu according to the speci-
fied audio function will appear on the monitor screen.
Program Timer
These items let you set the program timer for each day of
the week.
1. Move the cursor to the program editing area for each
day in the TIMER REC SETUP menu by pressing the D
or Cbutton.
2. Select a program timer (PROG1to PROG4) to be
assigned for the day.
It is recommended to assign a program to a weekday, a
weekend or on a daily basis.
Selecting (---) will disable the program timer.
3. Repeat the above step to assign the program timer for
other days.
4. Move the cursor to the assigned program number
(PROG1), then press the SETbutton.
The assigned program number menu as shown below
appears on the monitor screen.
2-1 TRIGGER ACTION SETUP
CAM  ACTION   CAM  ACTION
  1  REC+ALM    9  REC+ALM
  2  REC       10  REC+ALM
  3  OFF       11  REC+ALM
  4  REC+ALM   12  REC+ALM
  5  REC+ALM   13  REC+ALM
  6  REC+ALM   14  REC+ALM
  7  REC+ALM   15  REC+ALM
  8  REC+ALM   16  REC+ALM
3 TIMER REC SETUP(WITHOUT AUDIO)
             PROGRAM
SUNDAY         ---
MONDAY         ---
TUESDAY        ---
WEDNESDAY      ---
THURSDAY       ---
FRIDAY         ---
SATURDAY       ---
DAILY        PROG1
TIMER SPECIAL DAY
EXT REC MODE   --- 
						

							51
8. Move the cursor to the editing area (NO. 2 to NO. 4) by
pressing the Dor Cbutton, then repeat the steps 6
and 7 to edit the schedule.
9. When all settings are completed, press the
SETUP/ESCbutton to return to the previous TIMER
REC SETUP menu.
Special Day Timer
Before programming this table, confirm that the Program
Timer is programmed completely.
This table allows for up to 30 days to be defined as special
days.
In this table, 30 specific user defined days are assigned to
one day of the week.
1. Move the cursor to TIMER SPECIAL DAY in the TIMER
REC SETUP menu by pressing the Dor Cbutton, then
press the SETbutton.
The TIMER SPECIAL DAY SETUP table as shown below
appears on the monitor screen.
2. Move the cursor to the DATE editing area by pressing
the Dor Cbutton.
3. Select a month by pressing the +or -button.
Move the cursor to the right by pressing the Bbutton,
then select the date by pressing the +or -button.
Note:The programmed month and date will be valid for
every year.
4. Move the cursor to the ACT editing area by pressing
the Bbutton, then select the day of the week by press-
ing the +or -button.
5. Repeat the above steps 2 to 4 to program the other
special days.
6. When satisfied with all special days, press the
SETUP/ESCbutton to return to the previous TIMER
REC SETUP menu.
Note:To release the programmed special day timer, select
“
---” in the ACT column. Note:The program number menu (with audio) displays
only the Group 1 editing area.
5. Move the cursor to the time editing area (NO. 1) by
pressing the Dor Cbutton.
6. Move the cursor to the time to start and end the record-
ing by pressing the Aor Bbutton, then select the time
by pressing the +or -button.
Notes:
• If the time (No.1) to end the recording is set to
24:00, the editing function for the timers (No. 2 to
No. 4) is disabled.
• If the time (No.1) to end the recording is set to
12:00, the time (No. 2) to start a recording cannot
be set to a time before 12:00.
• When programming a timer extended into the next
day, divide the timer event into two separate events
and program both events separately in the program
menu or other program menu.
For example,
Start End
0:00 7:00
23:00 24:00
7. Move the cursor to the recording editing area for
groups by pressing the Aor Bbutton, then select the
recording mode for groups by pressing the +or -
button.
T/L:Time Lapse Recording
M/S:Multi Shot Recording
O/S:One Shot Recording
—:Disables Recording
Note:For further recording settings, refer to the record-
ing mode selected described later.
3-5 TIMER SPECIAL DAY SETUP
   DATE  ACT    DATE  ACT    DATE  ACT
 1 JUL 4 SUN 11 ----- --- 21 ----- ---
 2 ----- --- 12 ----- --- 22 ----- ---
 3 ----- --- 13 ----- --- 23 ----- --- 
 4 ----- --- 14 ----- --- 24 ----- ---
 5 ----- --- 15 ----- --- 25 ----- ---
 6 ----- --- 16 ----- --- 26 ----- ---
 7 ----- --- 17 ----- --- 27 ----- ---
 8 ----- --- 18 ----- --- 28 ----- ---
 9 ----- --- 19 ----- --- 29 ----- ---
10 ----- --- 20 ----- --- 30 ----- ---
3-1 PROG1(WITHOUT AUDIO)
NO START  END   G1    G2    G3    G4
 1  0:00  6:00 T/L   T/L   T/L   T/L
          RATE  7.5   7.5   1     10
 2  6:00 12:00 M/S    -    O/S   O/S
          RATE  10          5     1
 3 12:00 18:00 M/S   M/S   M/S   M/S
          RATE  5     2     2     5
 4 18:00 24:00 O/S   M/S    -    M/S
          RATE  15    10          10
 SET TOTAL REC RATE ON EACH TABLE
   G1+G2+G3+G4= UNDER 60FPS 
3-1 PROG1(WITH AUDIO)
NO START  END   G1
 1  0:00  6:00 T/L
          RATE  7.5
 2  6:00 12:00 M/S 
          RATE  10       
 3 12:00 18:00 M/S 
          RATE  5  
 4 18:00 24:00 O/S 
          RATE  15 
						

							52
External Program Timer
The internal timer can be changed to the specified timer
previously programmed by the input from the external
timer. This function is enabled, when a contact is connect-
ed with pin 22 of the ALARM port.
This item lets you enable or disable the external timer for
recording.
1. Move the cursor to the EXT REC MODE parameter in
the TIMER REC SETUP menu by pressing the Dor C
button.
2. Select the desired program to be changed by pressing
the +or -button.
PROG1 - 4:Selects a timer assigned program number.
---:Disables the external program timer.
The factory default setting is 
---.
3. Press the SETbutton to display the assigned program
number menu previously programmed.
If the program number menu has not been edited previ-
ously, edit the assigned program number menu as
described before.
4. Press the SETUP/ESCbutton to return to the previous
setup menu.
Time Lapse Recording (Internal
Timer) 
These items let you set the recording parameters for Time
Lapse Recording assigned in the program number menu.
(Continued from Program Timer)
1. Select the recording mode T/L in the program number
menu by pressing the +or -button, then press the
SETbutton.
The selected Time Lapse Recording menu shown
below appears on the monitor screen.
2. Move the cursor to the TIMER REC MODE parameter in
the menu by pressing the Dor Cbutton.3. Select the recording time mode to be set by pressing
the +or -button.
OFF:Disables normal recording and enables only
alarm recording.
SF-✽✽H or SF-A*✽✽H:Selects the recording time
mode in enhanced fine quality.
FQ-✽✽H or FQ-A*✽✽H:Selects the recording time
mode in fine quality.
NQ-✽✽H or NQ-A*✽✽H:Selects the recording time
mode in normal quality.
EX-✽✽H or EX-A*✽✽H:Selects the recording time
mode in extended quality.
SP or SP-A*:Freely selectable
✽✽indicates the hours for recording time mode:
2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480,
720, 960, 1200, 1440, 2160, 2880, 3600, 4320,
6480, 8640 
(parameter A* indicates recording with audio)
When the parameter SF/FQ/NQ/EX is selected for
recording time, the recording rate and quality are auto-
matically set according to the selected recording time.
Note:It may not be possible to set the recording time,
depending on the remaining storage capacity of the
hard disk.
The factory default setting is SF-24H.
4. If the parameter SP is selected for recording time, move
the cursor to the REC RATE parameter by pressing the
Dor Cbutton, then select a recording rate by pressing
the +or -button.
1 - 60FPS:Records the selected number of freeze
images every second.
0.5FPS:Records a freeze image every 2 seconds.
0.4FPS:Records a freeze image every 2.5 seconds.
0.3FPS:Records a freeze image every 3.3 seconds.
0.2FPS:Records a freeze image every 5 seconds.
0.1FPS:Records a freeze image every 10 seconds.
Notes:
• The maximum recording rate depends on the
selected parameters in the COMMON SETUP menu
as shown in the table.
FIELD/FRAME CAMERA GENLOCK REC RATE
FIELD ON 60FPS
OFF 30FPS
FRAME 3DIM  ON 10FPS
ON OFF 10FPS
FRAME 3DIM  ON 30FPS
OFF OFF 15FPS
3-1-1-1 PROG1-NO1-G1 REC SETUP
T/L(TIME LAPSE)
  TIMER REC MODE        SF- 24H
    REC RATE            7.5FPS
    QUALITY             SUPER FINE
 TRIGGER ACTION         REC+ALM
 EVENT REC MODE         SF- 24H
    REC RATE(MAX)       7.5FPS
    REC QUALITY         SUPER FINE
    DURATION            10S
    DYNAMIC REC         OFF
    REC RATE(BASE)      1FPS
    AUTO COPY           OFF