Panasonic Digital Disk Recorders Wj Hd500a Operating Instructions

73
Buzzer Setting
This item lets you enable or disable the buzzer sound
accompanying operation of the Disk Recorder’s buttons.
1. Move the cursor to the BUZZER parameter in the SYS-
TEM SETUP menu by pressing the Dor Cbutton.
2. Select either ON or OFF by pressing the +or -but-
ton.
ON:Enables the buzzer.
OFF:Disables the buzzer.
The factory default setting is ON.
User Defined Setting
This item lets you select either save or load the user
defined setting previously made in the setup menu.
1. Move the...

74
2. Select an item or item parameter in the menu by press-
ing the Dor Cbutton.
3. To return to the previous setup menu, press the
SETUP/ESCbutton.
Disk Information
1. Move the cursor to DISK INFORMATION in the DISK
MANAGEMENT menu by pressing the Cor Dbutton,
then press the SETbutton.
The DISK INFORMATION table appears on the monitor,
as shown below.
2. To return to the previous setup menu, press the
SETUP/ESCbutton.
Disk Space Indicator
This item lets you determine the indication mode for the
FULL...

75
System Information
The table indicates the version of the hardware and soft-
ware.
1. Move the cursor to SYSTEM INFORMATION in the SYS-
TEM SETUP menu by pressing the Cor Dbutton, then
press the SETbutton.
The SYSTEM INFORMATION table appears on the mon-
itor screen.
Note:“VMD” will be displayed when the optional
motion detector board is installed in the disk
recorder.
2. To return to the previous SYSTEM SETUP menu, press
the SETUP/ESCbutton.
Error Report
There are 100 error records stored in...

76
DVD DRIVE SETUP
The procedures described below let you select the DVD
Drive function when the specified DVD drive is installed in
the system.
1. Move the cursor to DVD on the WJ-HD500 SETUP menu
by pressing the Cor Dbutton, then press the SETbut-
ton.
The DVD menu shown below appears on the monitor
screen.
2. Select an item or item parameter on the menu by press-
ing the Dor Cbutton.
3. To return to the previous setup menu, press the
SETUP/ESCbutton.
DVD Format
Refer to PREPARATIONS for details....

77
Emergency Recording Backup
This item lets you enable or disable automatic backup of
Emergency Recording data.
1. Move the cursor to the AUTO COPY(EMERGENCY)
parameter on the DVD menu by pressing the Cor D
button
2. Select either ON or OFF by pressing the +or -but-
ton.
OFF:Disables emergency data backup.
ON:Enables emergency data backup.
The factory default setting is OFF.
Note:The following operations will be disabled by
AUTO COPY(EMERGENCY) ON.
Formatting the DVD-RAM disk
Displaying DVD-RAM disk...

79
OPERATING PROCEDURES 

80
Single Sequence (Live)
A series of camera images can be displayed in succession
on the monitor screen for the specified duration.
Refer to the 5 - 1 - 3 SPOT LIVE SEQUENCE SETUP for fur-
ther details.
1. Press the SEQUENCEbutton to run the assigned
sequence forward on the monitor screen.
The indicator in the button lights to indicate that the
sequence mode is selected.
The indicator in the numeric button lights up and the
camera image corresponding to the button appears on
the monitor screen.
2....

81
3. To select another image, press a numeric button (1 -
16)corresponding to the image.
The selected image appears on the monitor screen.
The indicator on the button previously selected turns off
and the indicator on the button currently selected lights
up.
Zooming Single Spot (Live)
While the image on the monitor screen is displayed in
Single Spot mode, the image can be zoomed followed the
procedure below.
1. Select an image to be zoomed on the monitor by press-
ing a numeric button (1 - 16).
The...

82
6. To return to Spot monitoring, select an image to be dis-
played on the monitor by pressing a numeric button (1 -
16).
Notes:
• You can also enable the Auto Skip function to skip
any steps when no video signal is present.
Refer to AUTO SKIP in the 5 - 1 SEQUENCE SETUP
for further details.
• The setting can be adjusted in such a way that the
sequence step for displaying an image on the Spot
Monitor screen in the single spot mode can be
skipped automatically.
Refer to the SECRET VIEW in the 5...

83
Multiscreen Spot (Live)
The monitor can display the camera images on a 4, 7, 9,
10, 13 and 16 multiscreen shown below.
1. Select the input for all groups (or one group) by press-
ing the GROUP SELECTbutton.
Pressing this button toggles the group display on the
monitor as shown below.
G1:Group 1
G2:Group 2
G3:Group 3
G4:Group 4
none:All Inputs
Note:Select All Inputs for displaying all camera
images, otherwise only camera images assigned to
a group are displayed on the monitor.
2. Select the screen...