Panasonic Digital Disk Recorders Wj Hd500a Operating Instructions

63
EXT:Alarm output continues until the ALARM RESET
button is pressed or the external alarm recover sig-
nal is received from the ALARM port.
The factory default setting is 2S.
Alarm Buzzer Setting
This item lets you select the ringing duration of the built-in
alarm buzzer when an alarm is activated.
1. Move the cursor to the ALARM BUZZER parameter in
the ALARM SETUP menu by pressing the Dor Cbut-
ton.
2. Select the desired duration by pressing the +or -
button.
OFF:Disables alarm buzzer, regardless of...

64
6. Move the cross pointer on the screen to the starting
point for the area by pressing the A, B, Dor Cbut-
ton, then press the SETbutton.
7. Move the cross pointer on the screen to the ending
point for the area by pressing the A, B, Dor Cbut-
ton, then press the SETbutton to determine the rectan-
gular detecting area.
Four detecting areas can be set on the screen.
To assign another detecting area, repeat the above
steps 6 and 7.
8. To delete the area, move the cursor to the rectangle to
be delete on...

65
2. Move the cursor to the camera title editing area you
want to edit by pressing the D, C, Aor Bbutton.
3. Select a character by pressing the +or -button.
The characters shown below can be selected in
sequence.
Numeral:0 1 2 3 4 5 6 7 8 9
Alphabet:A to Z, a to z
Symbols:←→= ?   # $ % & ( ) 
*+ , – . / : ;
Space:•
4. Move the cursor to the right in the editing area by
pressing the Bbutton, then select a character by
pressing the +or -button.
5. Repeat the above steps to select characters until the...

66
Title Display
This item lets you enable or disable the display of the cam-
era and group title on the Multiscreen Monitor.
1. Move the cursor to the TITLE DISPLAY parameter in the
DISPLAY SETUP menu by pressing the Dor Cbutton.
2. Select either ON or OFF by pressing the +or -but-
ton.
ON:Enables the display of the camera and group title
on the monitor screen.
OFF:Disables the display of the camera and group title
on the monitor screen.
The factory default setting is ON.
Status Display
This item lets...

67
Title Display Position Setting
This item lets you select the position where the title display
is placed on the Spot and Multiscreen Monitor.
1. Move the cursor to the TITLE POSITION parameter in
the DISPLAY SETUP menu by pressing the Dor Cbut-
ton.
2. Select a position to be displayed on the monitors by
pressing the +or -button.
L-UPPER:Placed in the upper-left corner of the monitor
screen.
R-UPPER:Placed in the upper-right corner of the moni-
tor screen.
L-LOWER:Placed in the lower-left corner of...

68
The procedures described below let you set the parame-
ters for the Disk Recorder to communicate with external
devices.
1. Move the cursor to COMMUNICATION SETUP in the
WJ-HD500 SETUP menu by pressing the Cor Dbut-
ton, then press the SETbutton.
The COMMUNICATION SETUP menu shown below
appears on the monitor screen.
2. Select an item or item parameter in the menu by press-
ing the Dor Cbutton.
3. To return to the previous WJ-HD500 SETUP menu,
press the SETUP/ESCbutton.
PS•Data Setup
These items let...

69
Parity Check
This item lets you set the parity bit for RS-485 communica-
tion.
1. Move the cursor to the PARITY CHECK parameter by
pressing the Dor Cbutton.
2. Select NONE, EVEN or ODD for parity check by press-
ing the +or -button.
The factory default setting is NONE.
Stop Bit
This item lets you set the number of stop bits for RS-485
communication.
1. Move the cursor to the STOP BIT parameter by press-
ing the Dor Cbutton.
2. Select either 1 or 2 for the number of stop bits by press-
ing the +or...

70
Baud Rate
This item lets you set the transmission speed for RS-232C
communication.
1. Move the cursor to the BAUD RATE parameter by
pressing the Dor Cbutton.
2. Select the desired transmission speed shown below by
pressing the +or -button.
The factory default setting is 9 600 bps.
Data Bit
This item lets you set the number of data bits for RS-232C
communication.
1. Move the cursor to the DATA BIT parameter by press-
ing the Dor Cbutton.
2. Select either 7 or 8 for the number of data bits by press-...

71
Stop Bit
This item lets you set the number of stop bits for RS-232C
communication.
1. Move the cursor to the STOP BIT parameter by press-
ing the Dor Cbutton.
2. Select either 1 or 2 for the number of stop bits by press-
ing the +or -button.
The factory default setting is 1 bit.
Wait Time
This item lets you set the waiting time in milli-seconds (ms)
to retry after confirming that no data is received from the
controller for RS-232C communication.
1. Move the cursor to the WAIT TIME parameter by...

72
The described below let you determine the system desig-
nation and display the system logs.
1. Move the cursor to SYSTEM SETUP in the WJ-HD500
SETUP menu by pressing the Cor Dbutton, then
press the SETbutton.
The SYSTEM SETUP menu shown below appears on
the monitor screen.
2. Select an item or item parameter in the menu by press-
ing the Dor Cbutton.
3. To return to the previous setup menu, press the
SETUP/ESCbutton.
Clock Setup
This item lets you set the current time and date.
1. Move the cursor to...