Panasonic Digital Device Display Pt 43lcx64 Operating Instructions

21
Getting Start ed
OPTICAL
Manufactured under license 
from Dolby Laboratories. “Dolby” 
and the double-D symbol are 
trade marks of Dolby 
Laboratories.
Firmly connect 
the cable to 
the connector.
Connect three 
or more 
speakers for 
surround 
sound. Speakers (example) Use the diagram below to connect the Digital Audio Output of your Device Display to a Dolby Digital 
decoder.
  Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides fi ve discrete...

22For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
RGB OUT AUDIO OUT
COMPUTER
How to connect the RGB IN Terminals
Notes:
•  Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) to 
connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB 
15P terminal.
•  The computer shown in the illustration is for example...

23
Getting Start ed
Installation
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from any of the types listed below is input, the picture image may not be 
dis played correctly, or a black background may be displayed. At this time, “signal” will fl ash in the 
on-screen display for about 5 seconds.
Notes:
•  Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
•  The...

24For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
How to connect the  HDMI input terminal
Installation
HDMI OUT
The connector on the unit is HDMI Type A connector.
AUDIO OUTHDMI OUT
The connector on the unit is HDMI Type A connector.
About HDMI
HDMI is the fi rst all digital consumer electronics A / V interface that supports several uncompressed standard, 
enhanced and high defi nition video format as well as all existing...

25
Getting Start ed
Installation
By inputting a High-bandwidth Digital Content Protection high-defi nition picture source to the HDMI IN terminal of 
this Device Display, high-defi nition pictures can be displayed on the screen in their digital form. (This terminal is for 
use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)
Notes:
• Select the HDMI input position by pressing the TV/VIDEO button. (P. 37)
• The 
HDMI IN terminal can only be used with...

26For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Always be sure to follow the procedure given below to turn the Device Display power ON and OFF.
•  The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned off. At the same time, the 
POWER indicator will blink Red.
Press POWER on Device Display or Remote Control to 
turn power on.
The Power Indicator blinks Green for about 10 seconds 
and...

27
Basic Operation
Notes:
•  Auto scan must be done when you select the input signal for the fi rst time or whenever you change the antenna confi guration.
•  Depending on conditions, Auto scan may take a while.
For your convenience, First Time Set up menu will be displayed on screen when the set is turned on for the 
fi rst time. If needed, follow the menus and procedures displayed on-screen for setting up the features.
Input Setup
To select the confi guration of RF input depending on the signal source....

28For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Pressing MENU 
displays the 
Main 
Menu screen.
Note:
Depending on the signal 
being input, some items 
may or may not be 
adjustable and some 
functions may or may not 
be available.
Basic Menu Navigation
Continued in left column of next page. Pressing 
MENU again 
displays 
previous level 
menu.
CH
CH VOL VOL
OK
Pressto select the desired 
icon.
CH
CH VOL VOL
OKPressto enter the...

29
Basic Operation
Basic Menu Navigation
CH
CH VOL VOL
OKPress to adjust or set desired 
menu item.
Note: For Other Adjust sub-menu.
CH
CH VOL VOL
OKPress to select Other Adjust.
CH
CH VOL VOL
OKPress to access Other Adjust 
sub-menu.
CH
CH VOL VOL
OKPress to select desired sub-menu 
items.
CH
CH VOL VOL
OKPress to select desired sub-menu 
items.
Note: To EXIT menus.
Press repeatedly until normal 
picture is displayed.
Pressto return to normal picture.
EXIT
Continued from page 28.
Continued in right...

30For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
CH
CH VOL VOL
OK
Automatically searches and adds receivable channels to memory.
Press 
MENU to display the Main Menu screen.
Press to select 
Setup icon.
Press to display 
the options in the 
Setup menu.
Press to display 
the 
Program 
Channel menu.
Press to select 
Program CH 
icon
.
Press to select 
Input Setup.
Note:
TV or Cable Tuning mode must be set according 
to your...