Panasonic Digital Color Imaging Systems For Printer Dp C266 Operating Instructions

							41
 Chapter 2    SD Print Settings
Image Repeat
When you print an image individually, multiple images of an original can be printed onto a sheet.
zThis function is only available when an image is selected in the Thumbnail/Individual tab.
1Select “More Settings”.
zTo display this screen, select the Thumbnail/
Individual tab in step 4 of Printing from SD 
Memory Card (see page 12).
2Select “1 to N”.
3Select the desired number for image 
repeat, and then select “OK”.
4Select “Close”.
zFor the following procedure, refer to steps 7 
to 9 of Printing from SD Memory Card 
(see page 13). 
						

							42
 Chapter 2    SD Print Settings
Preset Jobs
Preset Job function simplifies setting procedures and improves operating efficiency.
Storing a Job in Memory
You can register the frequently used print settings to job buttons.
zUp to 10 preset jobs can be registered.
zOnce registered, the print job settings are kept in the job memory until they are overwritten by new settings.
zRefer to Recalling a Preset Job Stored in Memory (see page 44).
1Press the Print key if the machine is 
set to other function mode.
2Select “SD Print”.
3Insert the SD Memory Card or connect 
the USB Flash Memory.
zFor details on how to insert the SD Memory 
Card, refer to step 2 of Printing from SD 
Memory Card (see page 11).
zFor details on how to connect the USB Flash 
Memory, refer to step 3 of Printing from 
USB Flash Memory (see page 14).
4Select the print features (see pages 26 
to 41).
5Enter the desired number of prints.
6Select “Preset Jobs”.
7Select “Save”, and then select a job 
button.
zJob name is displayed on the button in 
which a job has been already registered. 
						

							43
 Chapter 2    SD Print Settings
8Enter a job name, and then select 
“OK”.
zUp to 20 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) of provided CD-ROM.
zAfter completing the editing of the job name, press 
the Reset key to return to the initial screen of the 
currently active mode. 
						

							44
 Chapter 2    SD Print Settings
Recalling a Preset Job Stored in Memory
You can recall the registered print settings by selecting preset job buttons.
zRefer to Storing a Job in Memory (see page 42).
1Press the Print key if the machine is 
set to other function mode.
2Select “SD Print”.
3Insert the SD Memory Card or connect 
the USB Flash Memory.
zFor details on how to insert the SD Memory 
Card, refer to step 2 of Printing from SD 
Memory Card (see page 11).
zFor details on how to connect the USB Flash 
Memory, refer to step 3 of Printing from 
USB Flash Memory (see page 14).
4Select the desired data.
5Select “Preset Jobs”.
6Select the desired preset job.
zJob buttons without names, indicate that 
jobs have not been registered.
zIf the Confirmation screen is displayed, 
select “Close”.
7To confirm the job settings, select 
“Confirm Settings”, and then select 
“Close”.
zTo change the setting, refer to Confirming/
Editing the Selected Print Features (see 
page 45).
8Press the Start key.
zAfter finishing printing, press the Reset key to 
return to the initial screen of the currently active 
mode. 
						

							45
 Chapter 2    SD Print Settings
Confirming/Editing the Selected Print 
Features
1After setting print features, select 
“Confirm Settings”.
zFor details on how to set print features, see 
pages 26 to 41.
2Confirm the settings, and then select 
“Close”.
zTo cancel all the settings, select “Reset All”.
zTo register the settings to Preset Job 
buttons, select “Preset Jobs”. For details, 
refer to steps 7 to 8 of Storing a Job in 
Memory (see page 42).
zTo edit the settings, select the button of the 
setting that you want to edit. For details on 
each setting screen, refer to the 
corresponding section (see pages 26 to 41).
Ex:Changing the Sort mode to the Non Sort 
mode when optional Finisher is installed
Select “Sort”.
Select “Non Sort”, and then select “OK”.
Select “Close”. 
						

							46
 Chapter 3    Solving Problems
Chapter 3
Solving Problems
Tips for Solving Problems
Printing Operation Failure
If the printing operation fails, check the following items.
Documents Not Printing Correctly
SymptomActionRefer to
Cannot printCheck that papers are loaded properly in 
the paper tray of the device.Operating Instructions (For Maintenance)
Check that an error message is not 
displayed on the device. 
SymptomPossible Causes/SolutionsRefer to
Incorrect printing position or print is missing at the 
edge.The specified paper is not loaded in the machine.
Check the settings again, or load the appropriate 
paper.
Operating 
Instructions 
(For 
Maintenance)The document margin is not sufficient.
Printing stops in the middle of run.Check that papers are loaded properly in the paper 
tray of the device.
Document is not printed from Sheet Bypass.Check the paper size set to the Sheet Bypass tray. 
The following paper sizes can be set to the Sheet 
Bypass Tray:
Ledger, Legal, Letter, and Invoice. 
						

							47
 Chapter 3    Solving Problems
Error Messages
From the error messages displayed on the Touch Panel Display, it is possible to know the causes of 
the problem, and the solutions.
Checking Error Messages
1Press the Print key if the machine is 
set to other function mode.
2Select “Job Control”.
3Select “Output Queue”.
4Select “Print History”.
5Confirm the messages displayed on 
the Status column, and then select 
“Close”.
Error MessagesPossible Causes/Solutions
Print Parameter 
Error(001)The Duplex Unit does not 
function properly.
Contact to the Panasonic 
Authorized Dealer to maintain 
your machine.
Print Parameter 
Error(101)Paper size unable to print in 2-
Sided is selected. (Duplex 
printing is not possible from the 
tray set with A5 in Landscape 
format.)
Print Parameter 
Error(119)Specified a wrong Media Type 
when printing a document with 
Rotate sorting.
Verify the Media Type setting on 
your machine. 
						

							48
 Chapter 4    Appendix
Chapter 4
Appendix
Combined Print Functions
File List Tab
Blank: Combined setting is available.
x: Combined setting is not available.
A: The latter selection has the priority over the initially selected function.
/: There is no combination.
*1: The Output Tray setting is automatically changed to “Outer” even if “Inner” has been initially selected.
*2: The Output Tray setting is automatically changed to “Inner” even if “Outer” has been initially selected.
*3: The Sort setting is automatically changed to “Sort” even if “Shift-Sort” has been initially selected.
*4: The Sort setting is automatically changed to “Non Sort” even if “Shift-Group” has been initially selected.
*5: The Sort setting is automatically changed to “Sort” even if “Rotate-Sort” has been initially selected.
*6: The Sort setting is automatically changed to “Non Sort” even if “Rotate-Group” has been initially 
selected.
*7: When “Black” has been selected in “Color Mode”, this function is invalid even if it is selected.
*8: When “Black” has been selected in “Color Mode”, the settings of Cyan, Magenta, and Yellow are invalid 
even if adjusted.
InnerOuterSort Non Sort Shift-SortShift-GroupRotate-SortRotate-GroupTintBrightnessSaturationColor BalanceContrastColor Mode2-Sided
Inner/A
A*1A*1
Outer A/
A*2A*2
Sort/AAAAA
Non Sort A/AAAA
Shift-Sort
A
*3AA/AAA
Shift-Group
A
*4AAA/AA
Rotate-Sort
A
*5AAAA/A
Rotate-Group
A
*6AAAAA/
Tint/
*7
Brightness/
Saturation/
*7
Color Balance/*8
Contrast/
Color Mode
*7 *7 *8/
2-Sided/
Newly Set Functions
Initially Set Functions 
						

							49
 Chapter 4    Appendix
Thumbnail/Individual and Thumbnail/Index Print Tabs
InnerOuterSort Non Sort Shift-SortShift-GroupRotate-SortRotate-GroupTintBrightnessSaturationColor BalanceContrastColor ModeFrame SettingsIndex SettingsMirror2-Sided1 to N
Inner/A
A*1A*1
Outer A/
A*2A*2
Sort/AAAAA
Non Sort A/AAAA
Shift-Sort
A
*3AA/AAA
Shift-Group
A
*4AAA/AA
Rotate-Sort
A
*5AAAA/A
Rotate-Group
A
*6AAAAA/
Tint/
*7
Brightness/
Saturation/
*7
Color Balance/*8
Contrast/
Color Mode
*7 *7 *8/
Frame Settings/AA
Index SettingsA/A
Mirror/A
2-SidedA/
1 to NxA/
Newly Set Functions
Initially Set Functions 
						

							50
 Chapter 4    Appendix
Specifications
PCL Printer Unit
*1 Microsoft® Windows® 2000 operating system
*2 Microsoft® Windows® XP operating system
*3 Microsoft® Windows Server® 2003 operating system
*4 Microsoft® Windows Vista® operating system
*5 Microsoft® Windows Server® 2008 operating system
The specifications are subject to change without notice. Panasonic Communications Co., Ltd. reserves the right 
to make improvements in the product design without reservation and without notice.
Printing Speed: 
(Plain paper, from Paper Tray 1)Color :Up to 30 sheets/minute (DP-C406/C306)
Up to 26 sheets/minute (DP-C266)
B & W :Up to 40 sheets/minute (DP-C406)
Up to 30 sheets/minute (DP-C306)
Up to 26 sheets/minute (DP-C266)
Resolution (dots per inch):Max. 1200 x 1200 dpi
Interface:USB 2.0, Ethernet (10Base-T/100Base-TX/1000Base-T)
Applicable OS:
Windows 2000*1, XP*2, Server 2003*3, Vista*4, Server 2008*5