Panasonic Digital Color Imaging Systems For Printer Dp C266 Operating Instructions

							11
 Chapter 1    Print Operations
Printing from SD Memor y Card
You can print images directly from the SD Memory Card.
zBe sure to use only a genuine SD Memory Card* (up to 32GB).
zImage data saved on the SD Memory Card cannot be printed if the Function Parameter “70 SD/USB Memory 
Function” (General Settings > Key Operator Mode) is set to “No”. For more details on this setting, refer to 
General Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
* SD Memory Card and SDHC Memory Card are referred to as SD Memory Card in this manual.
zAny commercial grade genuine SD / SDHC Memory Card can be used.
zThe optional Printer Controller Module is required for printing text/graphic files in the PDF format.
zSome TIFF and PDF files cannot be printed directly from the SD Memory Card depending on the type of 
format.
zWhen the printing result differs from the actual photograph image, set the Function Parameter “30 SD Print 
Settings (03 Auto Contrast)” (Printer Settings > General User Mode) to “On” (the initial setting of this function 
is “On”). The machine will automatically adjust the print quality. However, the level of improvement will vary with 
each photograph. For details, refer to the Operating Instructions (For Function Parameters) of provided CD-
ROM.
1Press the Print key if the machine is 
set to other function mode.
2Insert the SD Memory Card.
Push the Slot Cover to open it.
Insert the SD Memory Card as illustrated. 
(Label side up)
The data and the folder name on the SD 
Memory Card are displayed.
3Select “SD Print”.
Continued on the next page... 
						

							12
 Chapter 1    Print Operations
4Select “Thumbnail/Individual” or 
“Thumbnail/Index Print”.
zTo print thumbnail indexes (Index Print), 
select the desired data from the Thumbnail/
Index Print tab. 
zTo print images individually (Individual 
Print), select the desired data from the 
Thumbnail/Individual tab. 
5Select the desired data.
zYou can select all files at a time with the 
“Select All” button. 
zImages are printed in the selected order.
zSelect   or   to scroll pages.
zIf the desired data and the name of the 
folder are not displayed, press the   button 
until the desired data and folder appears.
‰When thumbnails are not displayed
Ex:JPEG files except from digital camera are 
displayed as follows.
Ex:When photo images are not included, a 
file list is displayed.
zTo select data from the File List tab, refer to 
step 5 of Printing from USB Flash 
Memory (see page 14).
zThe default directory can be set to display 
either “DCIM” (a folder for digital camera 
images) or “Scan Img” by changing the 
setting of the Function Parameter “30 SD 
Print Settings (01 SD/USB Memory Def. 
Dir.)” (Printer Settings > General User 
Mode). For more details on this setting, refer 
to Printer Settings in the Operating 
Instructions (For Function Parameters) of 
provided CD-ROM.
zThe default display type can be set to 
“Index”, “Indivi.”, or “FileList” by changing 
the setting of the Function Parameter “30 
SD Print Settings (02 SD/USB Mem. Disp. 
Ty p e )” (Printer Settings > General User 
Mode). For more details on this setting, refer 
to Printer Settings in the Operating 
Instructions (For Function Parameters) of 
provided CD-ROM.
zThe frame size for the Individual Print can 
be changed. For details, refer to Selecting 
the Frame Size for Individual Print (see 
page 36).
zThe Layout for the Index Print can be 
changed. For details, refer to Selecting the 
Layout for Index Print (see page 38). 
						

							13
 Chapter 1    Print Operations
6Select the required settings if 
necessary.
•Confirm Settings (see page 45)
•More Settings (see pages 26 to 41)
•Preset Jobs (see page 42)
•Paper/Output Tray: Selects the Paper Tray 
and Output Tray.
7Select “Start”.
8Push the SD Memory Card, and then 
remove it.
zDo not remove the SD Memory Card while 
the Access Indicator is flashing.
9Close the Slot Cover.
zWhen re-inserting the SD Memory Card into 
the slot, pull it out completely once, and then 
insert the card again.
zWhen canceling the operation, press the Reset 
key on the Control Panel. 
						

							14
 Chapter 1    Print Operations
Printing from USB Flash Memor y
You can print images directly from the USB Flash Memory.
zBe sure to use only a USB Flash Memory that supports Mass Storage Class (FAT16 or FAT32 format).
zUSB Flash Memory with the security function cannot be used.
zWe cannot guarantee compatibility with all USB Flash Memories. For details, contact the authorized Panasonic 
dealer.
zThe image data saved on the USB Flash Memory cannot be printed if the Function Parameter “70 SD/USB 
Memory Function” (General Settings > Key Operator Mode) is set to “No”. For more details on this setting, 
refer to General Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
1Press the Print key if the machine is 
set to other function mode.
2Select “SD Print”.
3Connect the USB Flash Memory.
4Select “File List”.
5Press the   button to display the USB 
Flash Memory folder, and then select 
the desired data.
zOnly one file can be selected at a time in the 
File List tab.
zTo select images from the Thumbnail/
Individual or Thumbnail/Index Print tab, refer 
to step 5 of Printing from SD Memory 
Card (
see page 12).
zSelect   or   to scroll pages. 
						

							15
 Chapter 1    Print Operations
6Select the required settings if 
necessary.
•Confirm Settings (see page 45)
•More Settings (see pages 26 to 41)
•Preset Jobs (see page 42)
•Paper/Output Tray: Selects the Paper Tray 
and Output Tray.
•2-Sided: Prints in the 2-Sided mode.
7Select “Start”.
8Remove the USB Flash Memory.
zDo not remove the USB Flash Memory while 
the Access Indicator is flashing.
9Close the Slot Cover.
zWhen canceling the operation, press the Reset 
key on the Control Panel. 
						

							16
 Chapter 1    Print Operations
Printing from the Inter nal Hard Disk Drive
You can print images saved in the internal Hard Disk Drive.
zThe Hard Disk Drive is enabled with 12 image boxes.
1Press the Print key if the machine is 
set to other function mode.
2Select “SD Print”.
3Select “File List”, and then select an 
Image Box in the Hard Drive.
zWhen the SD Memory Card or USB Flash 
Memory has been inserted, press the   
button to display the Hard Drive folder.
z
Only one Image Box can be selected at a time.
4Select the desired data.
zOnly one file can be selected at a time from 
the Image Box.
5Enter the desired number of prints.
6Select “Start”.
zWhen canceling the operation, press the Reset 
key on the Control Panel. 
						

							17
 Chapter 1    Print Operations
Mailbox Printing
Printing from Mailbox
You can print data saved in the machine’s Mailbox using the Control Panel. User ID (and password for 
Secure Mailbox) is required to print documents saved in Mailbox. Mailbox print is suitable for printing 
confidential documents.
zFor instructions on how to save printing data to Mailbox, refer to Print Operation (for Printer) in the Document 
Management System (Printer Driver) of provided CD-ROM.
1Press the Print key if the machine is 
set to other function mode.
2Select “Mailbox”.
3Enter the mailbox User ID (up to 8 
digits), and then select “OK”.
zWhen print data is saved in only one of the 
mailboxes (Check then Print, Mailbox, or 
Secure Mailbox), the mailbox is opened. In 
this case, go to step 5. 
Mailbox
Continued on the next page... 
						

							18
 Chapter 1    Print Operations
4Select the desired mailbox.
5Select the desired data, and then 
select “Print”.
‰When Check then Print is selected
zOnly one file can be selected at a time.
Enter the desired number of copies, and 
then select “OK”.
zWhen the Function Parameter “15 Check 
then Print Qty” (Printer Settings > Key 
Operator Mode) is set to “Ye s”, the screen 
confirming the number of copies is 
displayed. For more details, refer to Printer 
Settings in the Operating Instructions (For 
Function Parameters) of provided CD-ROM.
‰When Mailbox is selected
zAll files can be selected at a time with the 
“Select All” button.
zWhen the Function Parameter “16 Mailbox 
Print Qty” (Printer Settings > Key Operator 
Mode) is set to “Ye s”, the screen confirming 
the number of copies is displayed. Enter the 
desired number, and then select “OK”. For 
more details, refer to Printer Settings in the 
Operating Instructions (For Function 
Parameters) of provided CD-ROM. 
Check 
then PrintPrints one proof set before 
printing multiple sets. The 
document data will be deleted 
after printing.
MailboxPrints data in the mailbox that is 
specified by User ID. The 
document data will remain in the 
mailbox until it is deleted.
Secure 
MailboxPrints data in the mailbox that is 
specified by User ID. Password is 
also required to print confidential 
documents saved in Secure 
Mailbox. The document data will 
remain in the mailbox until it is 
deleted. 
						

							19
 Chapter 1    Print Operations
‰When Secure Mailbox is selected
zOnly one file can be selected at a time.
After selecting the data in Secure Mailbox, 
enter the password (8 to 16 digits), and 
then select “OK”. 
zWhen saving print data in the Secure 
Mailbox of the machine, set the password in 
more than 8 digits (the machine does not 
accept the data with the password in less 
than 8 digits). For more details, refer to the 
Document Management System (Printer 
Driver) of provided CD-ROM.
zWhen the Function Parameter “17 Secure 
MB Print Qty” (Printer Settings > Key 
Operator Mode) is set to “Ye s”, the screen 
confirming the number of copies is 
displayed. Enter the desired number, and 
select “OK”. For more details, refer to 
Printer Settings in the Operating 
Instructions (For Function Parameters) of 
provided CD-ROM. 
6When “Mailbox” or “Secure Mailbox” 
has been selected in step 4, select 
whether to delete the data after 
printing.
zWhen canceling the operation, press the Reset 
key on the Control Panel. 
						

							20
 Chapter 1    Print Operations
Deleting Mailbox Data
1Press the Print key if the machine is 
set to other function mode.
2Select “Mailbox”.
3Enter the mailbox User ID (up to 8 
digits), and then select “OK”.
zWhen print data is saved in only one of the 
mailboxes (Check then Print, Mailbox, or 
Secure Mailbox), the mailbox is opened. In 
this case, go to step 5. 
4Select the desired mailbox.
5Select the desired data, and then 
select “Delete”.
‰When Check then Print is selected
zOnly one file can be selected at a time.
‰When Mailbox is selected
zAll files can be selected at a time with the 
“Select All” button.
‰When Secure Mailbox is selected
zOnly one file can be selected at a time.