Panasonic Digital Camera Dmc Ts6 Owners Manual Advanced Features

							- 201 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and 
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P179) or [Favorite Connection] (P180) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [PC], and then press [MENU/SET].
5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select a PC you want to connect, and then press [MENU/SET].
•When the PC you want to connect to is not displayed, select [Manual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
7Press  3/4  to select the destinations folder of the PC, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P192)
8Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P189)
9Select and send the images. (P200)
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in those 
folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.•When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank 
character), etc., it may not be recognized correctly. If a connection attempt fails, we recommend that 
you change the computer name (or NetBIOS name) to the one consisting of only alphanumeric 
characters, with a maximum of 15 characters.
When sending images to PC
Preparations:
•
Turn the computer on.•Prepare folders for receiving images on the PC before sending a picture to the PC.  (P194)
•If the workgroup of the destination PC has been changed from the standard setting, you also need 
to change the setting of this unit in [PC Connection]. (P211)
[Via Network]When you want to connect to your PC via a wireless access point. 
(P185)
[Direct]When you want to directly connect your PC to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection]. (P187) 
						

							- 202 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and 
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P179) or [Favorite Connection] (P180) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Cloud Sync. Service], and then press [MENU/SET].5Press [MENU/SET].
6Press  3/4  to select [Via Network], and then press [MENU/SET].7Press  3/4  to select connection method, and then press [MENU/SET].  (P185)8Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.]. (P192)
9Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P189)
10Select and send the images. (P200)
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (P206) and configure the Cloud Sync. setting  (P195) to 
send a picture to a Cloud Folder. 
						

							- 203 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and 
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P179) or [Favorite Connection] (P180) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Web service], and then press [MENU/SET].
5Press  3/4  to select [Via Network], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].  (P185)7Press 3/4 /2/ 1 to select a WEB service you want to connect, and then press 
[MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P192)
8Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P189)
9Select and send the images. (P200)
•
Images uploaded to the WEB Service cannot be displayed or deleted with this camera. Check 
images by accessing the WEB Service with your smartphone/tablet or computer.
•If sending images fails, a  report email outlining the failure will be sent to the email address registered 
with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image was 
taken. Check this information before uploading images to WEB services.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB”  (P206) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service. (P209)
•Panasonic assumes no responsibility for the dama ges resulting from the leakage, loss, etc. 
of images uploaded on WEB services.
•When uploading images to the WEB Service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the WEB Service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							- 204 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and 
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P179) or [Favorite Connection] (P180) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [AV device], and then press [MENU/SET].
5Press  3/4  to select [Home] or [External], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].
7Press  3/4  to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P192)
8Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P189)
9Select and send the images. (P200)
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•Registration to “LUMIX CLUB” (P206)•Address number and access number acquired by the destination External AV device.  (P210)
[Via Network]When you want to connect to an AV device via a wireless access point. 
(P185)
[Direct]•This can be 
selected only 
when [Home]  
is selected.When you want to directly connect an AV device to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection]. (P187) 
						

							- 205 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and 
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P179) or [Favorite Connection] (P180) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Printer], and then press [MENU/SET].
5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select a printer you want to connect, and then press [MENU/SET].7Select pictures, and then print.  (P227)
•To change the setting or disconnect, press [Wi-Fi].  (P189)
•Motion pictures cannot be printed out.
When sending images to Printer
Preparations:
•
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)¢ printer.
¢ Compliant with the DPS over IP standards.
[Via Network]When you want to connect to your Printer via a wireless access point. 
(P185)
[Direct]When you want to directly connect your  printer to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P187) 
						

							- 206 -
Wi-Fi
Using “LUMIX CLUB”
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the devices 
you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures  to WEB services or external AV device.
•
You can set the same “LUMIX CLUB” login ID for this unit and a smartphone/tablet.  (P208)
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)2Press 3/4  to select [LUMIX CLUB], and press [MENU/SET].
3Press  3/4  to select [Add/Change Account], and press [MENU/
SET].
4Press  3/4  to select [New account], and press [MENU/SET].
•Connect to the network. Proceed to the next page by pressing [MENU/
SET].
•A confirmation screen will be displayed if a login ID has already been 
acquired for the camera. Select [Yes] to acquire a new login ID, or [No] 
if you do not need to acquire a new login ID.
5Select the method for connecting to a wireless access point, and set.
•Refer to P185 for details.•A setting screen will be displayed only when connecting for the first time. Once you set the 
connection method, it will be saved on this unit and used when connecting the next time. To 
change the wireless access point you want to connect to, press [DISP.], and change the 
connection destination.
6Press [MENU/SET].
7Read through the “LUMIX CLUB” terms of use and press [MENU/SET].
•You can switch pages by  3/4.
•You can enlarge (2 k) the display by pressing [T] of the zoom button. •You can reset the enlarged display to its original size (1 k) by pressing [W] of the zoom button. •You can move the position of the enlarged display with  3/4/2 /1.
•Press [Q.MENU/ ] to cancel the process without acquiring a login ID.
About the [LUMIX CLUB]
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note;
•The service may be suspended due to regular maintenance or unexpected troubles, and the 
service contents may be changed or added, without prior notice to the users.
•The service may be stopped in whole or in part with a reasonable period of advance notice. 
						

							- 207 -
Wi-Fi
8Enter a password and press [MENU/SET].
•Enter any combination of 8 to 16 characters and numbers for the password.•For details on how to enter characters, refer to “Entering Text” section on P94.
9Check the login ID and press [MENU/SET].
•The login ID (12-digit number) will be displayed automatically. When 
logging in to the “LUMIX CLUB” with a computer, you only need to enter 
the numbers.
•A message is displayed when the connection is complete. Press 
[MENU/SET].
•Be sure to make a note of the login ID and password.
•Exit the menu after it is executed.
Preparation:
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” website 
from your smartphone/tablet or PC and c hange the “LUMIX CLUB” password in advance.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)
2Press 3/4  to select [LUMIX CLUB], and press [MENU/SET].3Press  3/4  to select [Add/Change Account], and press [MENU/SET].4Press  3/4  to select [Change Login ID], and press [MENU/SET].
•The login ID and password are displayed.•The password is displayed as “ ”.
•Close the menu if only checking the login ID.
5Press  3/4  to select the login ID or password you want to 
change, and press [MENU/SET].
•
The confirmation screen is displayed when changing the login ID. 
Select [Yes].
6Enter the login ID or password, and press [MENU/SET].
•Refer to “Entering Text”  (P94)  for information on how to enter text.•Enter the new password you have created on your smartphone/tablet or PC into the camera. If 
the password differs from the one you created on  your smartphone/tablet or PC, you will not be 
able to upload images.
•Exit the menu after it is executed.
Check or change the acquired login ID/password 
						

							- 208 -
Wi-Fi
•Setting the same login ID on this unit and your smartphone/tablet is convenient for sending images 
on this unit to other devices or WEB services.
Check the details if the terms of use have been updated.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)2Press  3/4  to select [LUMIX CLUB], and press [MENU/SET].
3Press  3/4  to select [Terms of use], and press [MENU/SET].
•The camera will connect to the network and the terms of use will be displayed. Close the menu 
after checking the terms of use.
To set the same login ID for the camera and the smartphone/tablet
When either this unit or the smartphone/tablet has acquired the login ID:
1Connect this unit to the smartphone/tablet.  (P177)2From the “ Image App ” menu, set the common login ID.
•The login IDs for this unit and the smartphone/tablet become the same.
•After connecting this unit to the smartphone/tablet, the setup screen for a common login ID may 
appear when you display the playback screen. You can also set a common login ID by following the 
on-screen instructions.
•This operation is not available for [Wi-Fi Direct] connection.
When this unit and the smartphone/tablet have acquired different login IDs:
(When you want to use the smartphone’s/tablet’s login ID for this unit)
Change the login ID and password for this unit to those acquired by the smartphone/
tablet.
(When you want to use this unit’s login ID for the smartphone/tablet)
Change the login ID and password for the sm artphone/tablet to those acquired by this 
unit.
Check the “LUMIX CLUB” terms of use 
						

							- 209 -
Wi-Fi
Delete the login ID from the camera when transferring it to another party or disposing of it. You 
can also delete your “LUMIX CLUB” account.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)2Press 3/4  to select [LUMIX CLUB], and press [MENU/SET].
3Press  3/4  to select [Delete account], and press [MENU/SET].
•The message is displayed. Press [MENU/SET].
4Select [Yes] in the login ID delete confirmation screen.
•The message is displayed. Press [MENU/SET].
5Select [Yes] on the confirmation screen for deleting the “LUMIX CLUB” account.
•If you want to continue using t he service, selecting [No] will only  delete the login ID. Exit the 
menu after it is executed.
6Press [MENU/SET].
•The login ID is deleted, and then the message notifying the deletion of your account is 
displayed. Press [MENU/SET].
•Exit the menu after it is executed.
•Changes and other actions to login IDs can only  be made to the login ID acquired with the camera.
When sending images to WEB services, the WEB service being used must be registered with 
the “LUMIX CLUB”. Registering multiple WEB services will send images to all services 
simultaneously.
•
Check the “FAQ/Contact us” on the following site for compatible WEB services.
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation:
Make sure that you have created an account on the WEB service you want to use, and have 
the login information available.
1Connect to the “LUMIX CLUB” site using a smartphone/tablet or computer.http://lumixclub.panasonic.net/eng/c/
2Enter your “LUMIX CLUB” login ID and password and log in to the service.  (P206)
3Save your email address.4Select the WEB service to be used and save it.
•Follow the instructions on the screen to save the service.
Delete your login ID and account from the “LUMIX CLUB”
Using WEB services 
						

							- 210 -
Wi-Fi
Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.
•See the following site for AV device that is compatible with “LUMIX CLUB”.
There may be no compatible AV device in some countries.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)2Press  3/4  to select [External AV device], and press [MENU/SET].
3Press  3/4  to select [Add new device], and press [MENU/SET].4Enter the address number and select [Set].
•Refer to “Entering Text” (P94)  for information on how to enter text.
5Enter the access number and select [Set].6Enter any name and select [Set].
•A maximum of 28 characters can be entered.•Up to 14 characters can be entered for [ ], [ ], [ ], [ ] and [ ].•Exit the menu after it is executed.
Information on AV device that has already  been saved can be changed or deleted.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)
2Press 3/4  to select [External AV device], and press [MENU/SET].3Press  3/4  to select the AV device you want to change or delete, and press [MENU/
SET].
4Press  2/1  to select [Edit] or [Delete], and press [MENU/SET].
•
Exit the menu after it is executed.
Configuring the external AV device settings
Preparation:
Check the address number (16-digit number) and access number (4-digit number) of the 
destination AV device issued by “LUMIX CLUB”.
(Refer to the AV device instruction manual for details)
Change or delete information on registered AV device
ItemDescription of settings
[Edit]Change information on AV device that has already been registered.
Perform steps 4 through 6 of “Configuring the external AV 
device settings”.
[Delete]Delete information on AV device that has already been registered.
•Confirmation screen is displayed. It is executed when [Yes] is selected.