Panasonic Digital Camera Dmc Ts5 Owners Manual For Advanced Features

							- 261 -
Others
•Upload may not complete when it is disconnected while transmitting the image.
•It may take some time after uploading the image to be reflected in the WEB service depending on 
the status of the server.> Wait for a while and try again.
•You can check the transmission status on the WEB service link settings by logging into “LUMIX 
CLUB”.
•The images in the WEB Service cannot be saved (downloaded) to this unit. Do not delete the 
uploaded images, and make a backup of them.
• The images uploaded to the WEB service cannot be displayed or deleted by this unit.
> Perform the task using a smartphone/tablet or a PC.
•The settings stored in the camera may be deleted depending on the type of repair.
> Always make a copy of important settings.
•Is the size of the image too large?
> Divide the motion picture using [Video Divide]  (P163).
> Reduce the image size at [Size]  (P192), and then send. 
•Capacity or number of images in the WEB service is full.
> Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link 
settings.
> Execute the [Reset Wi-Fi Settings] in the [Setup] menu.  (P59)
> However, all the information you have set on the [Wi-Fi Setup] menu, which includes the “LUMIX 
CLUB” login settings, will be reset. (excluding [LUMIX CLUB] )
• Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide]  (P163).
> Reduce the image size at [Size]  (P192), and then send.
> Image cannot be transmitted when the battery indicator is flashing red.
The image that was supposed to have uploaded to the WEB service is not there.
I would like to return the image in the WEB service to the camera.
I cannot display or delete the images uploaded to the WEB service by this unit.
Your “LUMIX CLUB” login ID and password were deleted after sending the camera in 
to be repaired.
There is an image that could not be transmitted.
I have forgotten the password for the Wi-Fi.
Transmission of the image fails midway. 
						

							- 262 -
Others
•File format of the motion picture that can be sent differs depending on the destination. (P174)
• Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide]  (P163).
•Sending may fail depending on the operational status of the AV device.
Also, sending may take a while.
•Is your smartphone compatible with NFC?
> This unit can be used with NFC-compatible terminals via Android (OS version 2.3.3 or higher).
•Make sure the NFC function of your smartphone is ON.•Is [NFC Operation] set to [OFF]?  (P211)•Some smartphones cannot be easily checked simply by touching. If the camera is not recognized 
even after touching, change positions and try again by touching slowly.
•If the duration of touching is short, the smartphone may not be recognized. Touch and hold the 
smartphone for a while.
Motion picture cannot be transmitted.
I cannot send images to an AV device.
Cannot be connected using NFC. 
						

							- 263 -
Others
•Is the camera connected to the TV correctly?> Set the TV input to External Input Mode.
•Depending on the TV model, the pictures may be exte nded horizontally or vertically or they may be 
displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the 
TV?
> Connect the camera to the TV with the AV  cable (optional), or with the HDMI micro cable 
(optional), and then play back the motion pictures on the camera.  (P213)
> Check [TV Aspect] setting.  (P59)
•Is it connected properly with the HDMI micro cable (optional)?  (P213)
> Confirm that the HDMI micro cable (optional) is firmly fitted.
> Press [ (] on this unit.
•Is the [VIERA Link] on this unit set to [ON]?  (P60)
> Depending on HDMI terminal of th e TV, the input channel may not switch automatically. In this 
case, use the remote control for the TV to switch input. (For details on how to switch input, 
please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating 
instructions of the TV for details.)
•Is the camera connected to the PC correctly?•Is the camera recognized by the PC correctly?
> Set to [PC] in [USB Mode].  (P59, 222)
> Turn this unit off and on.
TV, PC and printer
The picture does not appear on the television.
The display areas on the TV screen and the camera’s LCD monitor are different.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV.
VIERA Link does not work.
Cannot communicate with the PC. 
						

							- 264 -
Others
>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection cable 
to another USB terminal.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not format.
> If the [Access] displayed on the LCD monito r does not disappear, disconnect the USB 
connection cable after turning this unit off.
•Pictures cannot be printed using a printer which does not support PictBridge. > Set to [PictBridge(PTP)] in [USB Mode]. (P59 , 226)
> When using a printer with a Cropping or Borderless Printing function, cancel this function before 
printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be printed 
with both ends.
•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible 
to print it correctly.
> Please use a printer that supports panorama pictures. (For details, please see the operating 
instructions of your printer)
> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to adjust 
the size of the still picture to the print paper size.
The card is not recognized by the PC. (The built-in memory is recognized.)
The card is not recognized by the PC. (SDXC memory card is used.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly. 
						

							- 265 -
Others
•Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P11.
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then 
select the [ ~] icon to set the desired language.  (P61)
•AF Assist Lamp will turn on white in the dark place to assist the focusing.
•Is [AF Assist Lamp] on the [Rec] menu set to [ON]?  (P115)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance or 
quality of the camera.
•Have foreign objects become trapped?
> Remove the foreign objects.  (P12)
•When closing, do not set the [LOCK] switch to the locked side. Doing so may cause damage or 
leaks.
> Release the lock.  (P22)
•If the camera is used in cold places such as ski resorts or places at high altitude with the snow or 
water droplets adhered to the camera, some parts of the camera may become hard to move with 
snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF] button. This 
is not a malfunction. When the camera returns to normal temperature it will function as normal.
•When using the camera in a place with sand or dust, some parts of the camera may become hard to 
move with foreign objects getting in the gap of the zoom button, or the camera [ON/OFF] button. 
Wipe off with a dry, lint-free cloth or rinse with fresh water.
•Below cases are not malfunctions, so you can use the camera as normal.
> You hear a “rattling” sound when the camera is shaken while this unit is turned off or during 
Playback Mode (this is the sound of the lens moving).
> When this unit is turned on or off, or when switching from recording to Playback Mode, there is a 
rattling noise (this is the sound of the lens moving).
> When zooming, you can feel some vibration (this is caused by the lens moving).
Others
[Requirements for Underwater use] is displayed repeatedly whenever this unit is 
turned on.
An unreadable language was selected by mistake.
A white lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The side door will not close.
A part of the camera such as the zoom button and side door does not move.
The camera makes a rattling sound or you can feel some vibration. 
						

							- 266 -
Others
•When the brightness changes due to zoom or camera movement etc., the lens may click and the 
picture on the screen may drastically change. However, the picture is not affected. The sound is 
caused by the automatic adjustment of the aperture. This is not a malfunction.
•If you do not use the camera for a long time, the clock may be reset.> [Please set the clock] message will be displayed; please reset the clock.  (P28)
•When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a 
malfunction.
•Is the camera set to Macro Zoom Mode? (P69)
Maximum zoom during Macro Zoom Mode is 3 k digital zoom.
•When you perform an operation after taking a certain action, the pictures may be recorded in folders 
with different numbers from the ones used prior to the operation.
•If you insert or remove the battery before turning off this unit, the folder and file numbers for the 
pictures taken will not be stored in the memory. When this unit is turned on again and pictures are 
taken, they may be stored under file numbers which should have been assigned to previous 
pictures.
•Formatting is not available in Intelligent Auto Mode. Switch the recording mode to another one. 
(P31)
•When [GPS Setting] is set to [OFF], magnetic declination is not corrected.
> Perform [Repositioning] of [GPS/Sensor] menu  (P125), and acquire correct latitude/longitude of 
the current location.
The lens clicks.
The clock is reset.
Zooming stops instantaneously.
Zoom does not go up to maximum magnification.
The file numbers are not recorded consecutively.
The file numbers are recorded in ascending order.
The card cannot be formatted.
Bearing information measured with this un it is different from the public bearing 
indications. 
						

							- 267 -
Others
•SDXC Logo is a trademark of SD-3C, LLC.
•“AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” 
logo are trademarks of Panasonic Corporation and Sony 
Corporation.
•Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
•HDMI, the HDMI Logo, and High-Definition Multimedia Interface 
are trademarks or registered trademarks of HDMI Licensing LLC 
in the United States and other countries.
•HDAVI Control™ is a trademark of Panasonic Corporation.•QuickTime and the QuickTime logo are trademarks or registered 
trademarks of Apple Inc., used under license therefrom.
•iMovie, Mac and Mac OS are trademarks of Apple Inc., 
registered in the U.S. and other countries.
•Windows and Windows Vista are ei ther registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or 
other countries.
•App Store is a service mark of Apple Inc.•Android and Google Play are trademarks or registered 
trademarks of Google Inc.
•The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.•The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.•“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered 
marks of the Wi-Fi Alliance.
•DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification 
marks of the Digital Living Network Alliance.
•This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered 
trademark of DynaComware Taiwan Inc.
•Other names of systems and products mentioned in these instructions are usually the registered 
trademarks or trademarks of the manufacturers  who developed the system or product concerned.
This product is licensed under the AVC patent portfolio license for the personal and 
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC 
Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and 
non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. 
No license is granted or shall be implied for any  other use. Additional information may be obtained 
from MPEG LA, LLC. See http://www.mpegla.com
 . 
						

							- 268 -
Others
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation and/or,
(3) open sourced software including the software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/
), and the software written by Eric Young 
([email protected]).
This product contains OpenSSL software developed by the OpenSSL Project, and can be used under 
the following licencing conditions.
LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and 
the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both 
licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL 
please contact [email protected].
OpenSSL License
Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and  the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. All advertising materials mentioning features or  use of this software must display the following 
acknowledgment:
This product includes software developed by the OpenSSL Project for use in the OpenSSL 
Toolkit. (http://www.openssl.org/)
4. The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote  products derived from this software without prior written permission. For written permission, 
please contact [email protected].
5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in  their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL 
Toolkit (http://www.openssl.org/)
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
						

							- 269 -
Others
This product includes cryptographic software written by Eric Young ([email protected]). This 
product includes software written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are 
adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, 
lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution 
is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be 
removed. If this package is used in a product, Eric Young should be given attribution as the author of 
the parts of the library used. This can be in the form of a textual message at program startup or in 
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the 
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. All advertising materials mentioning features or  use of this software must display the following 
acknowledgement:
This product includes cryptographic software  written by Eric Young ([email protected])
The word cryptographic can be left out if the routines from the library being used are not 
cryptographic related :-).
4. If you include any Windows specific code (or  a derivative thereof) from the apps directory 
(application code) you must include an acknowledgement:
This product includes software written by Tim Hudson ([email protected])
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT,STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publically available version or derivative of this code cannot 
be changed. i.e. this code cannot simply be copied and put under another distribution license 
[including the GNU Public License.] 
						

							- 270 -
Others
This product contains encryption software developed by Eric Young, and can be used under the 
following licencing conditions.
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are 
adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, 
lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution 
is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be 
removed. If this package is used in a product, Eric Young should be given attribution as the author of 
the parts of the library used. This can be in the form of a textual message at program startup or in 
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the  following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions 
and the following disclaimer in the documentation and/or other materials provided with the 
distribution.
3. All advertising materials mentioning features or  use of this software must display the following 
acknowledgement:
This product includes cryptographic software  written by Eric Young ([email protected])
The word cryptographic can be left out if the routines from the library being used are not 
cryptographic related :-).
4. If you include any Windows specific code (or  a derivative thereof) from the apps directory 
(application code) you must include an acknowledgement:
This product includes software written by Tim Hudson ([email protected])
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO 
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publically available version or derivative of this code cannot 
be changed. i.e. this code cannot simply be copied and put under another distribution license 
[including the GNU Public License.]