Panasonic Digital Camera Dmc Ts5 Owners Manual For Advanced Features

							- 171 -
Playback/Editing
You can delete or change the information relating to Face Recognition for the selected picture.
1Select [Face Rec Edit] on the [Playback] menu. (P48)
•Cleared information regarding the [Face Recog.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorized using Face Recognition in [Category Selection] in [Filtering Play].
•You cannot edit the Face Recognition information of protected pictures.
[Face Rec Edit]
2Press 3/4 to select [REPLACE] or [DELETE] and then press [MENU/
SET].
3Press 2/ 1 to select the picture and then press [MENU/SET].
4Press 2/1 to select the person and then press [MENU/
SET].
5(When [REPLACE] is selected) Press  3/4/2/1 to 
select the person to replace and then press [MENU/
SET].
•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed. 
						

							- 172 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or from 
a card to the built-in memory.
1Select [Copy] on the [Playback] menu. (P48)
2Press 3/4 to select the copy destination and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
•If a picture exists with the same name (folder number/file number) as the picture to be copied in the 
copy destination when [ ] is selected, a new folder is created and the picture is copied. If a 
picture exists with the same name (folder number/file number) as the picture to be copied in the copy 
destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•[Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after copying 
is finished.
•Motion picture recorded in [AVCHD] cannot be copied.
[Copy]
[]:
([IN>SD]) All the picture data in the built-in memory are copied onto the card at one 
time.
[]:
([SD >IN]) One picture at a time is copied from the card to the built-in memory.
Press 
2/1 to select the picture and then press [MENU/SET]. 
						

							- 173 -
Wi-Fi
Wi-FiR function
∫Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than wireless 
LAN devices, ensure that the appr opriate measures are taken for safety designs and defects 
for the systems used. Panasonic will not take any  responsibility for any damage that arises 
when using the camera for any purpos e other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this camera is presumed to be in countries where this 
camera is sold
There is the risk that the camera violates the  radiowave regulations if used in countries other 
than those where this camera is sold, and Panasonic takes no responsibility for any violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity or interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as near 
microwave ovens. Radio waves may not reach the camera.
•Using the camera near devices such as microwave ovens or cordless telephones that use the 
2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function,  wireless networks will be searched automatically. 
When this happens, wireless networks that  you are not authorized to use (SSID
¢) may be 
displayed, however do not attempt to connect to  the network as it may be considered as 
unauthorized access.
¢ SSID refers to the name that is used to identi fy a network over a wireless LAN connection. If the 
SSID matches for both devices, transmission is possible.
∫ Before Use
•To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped with 
the wireless LAN function is required. 
						

							- 174 -
Wi-Fi
∫Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
•Some images may not be played back or sent depending on the device.
•Refer to the manual of the destination equipment or the WEB service for more information on how to 
playback pictures.
∫ About the Wi-Fi connection lamp
•
When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to  [ON], and 
turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with 
gauges.  (P53)
•The camera cannot be used to connect to a public wireless LAN connection.•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access 
point.
•We strongly recommend that you set an encryption to maintain information security.•It is recommended to use a fully charged battery when sending images.
•When the battery indicator is flashing red, the connection with other equipment may not start or the 
connection may be disrupted. (A message such as [Communication error] is displayed.)
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Pictures may not be completely sent depending on radio wave conditions. If the connection is 
terminated while sending pictures, pictures with missing sections may be sent.
•Do not remove the memory card or battery or move to an area without any reception while 
sending images.
•The LCD monitor display may become distorted for an instant while connected to the service, 
however this will not affect the image being sent.
Images to 
sendDestination
[Smart
phone][PC][Cloud Sync.  Service][Web 
service][AV device][Printer]¢ 1[Home][External]
JPEG ±± ± ± ± ± ±
MP4¢1±± ± ± —— —
AVCHD¢1, 2— ± —————
3D —±± ± ±± —
A Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi 
connection 
						

							- 175 -
Wi-Fi
What you can do with the Wi-Fi function
Linking with the Wi-Fi compatible equipment allows you to remotely operate the camera, or 
share pictures with people in distant places even during recording or playing back.
Remote Shooting (P176)Playback on TV (P188)
Linking with a smartphone/tablet enables the 
following:
•Remote recording  (P178)•Playing back the pictures in the camera  (P178)
•Saving the pictures in the camera to the 
smartphone/tablet, or sending them to WEB 
services.  (P178)
•Sending the acquired location information to the 
camera. (P178) By linking with the DLNA compatible TV, you 
can display pictures on TV right after taking 
them or display them on TV later by playing 
them back on the camera.
Send Images While Recording 
(P190)Send Images Stored in the Camera  (P198)
Every time you take a picture, the picture can 
be automatically sent to a specified location. 
You can play back the picture on the 
smartphone/tablet, or save and edit it on PC.
•Send to:
–[Smartphone]  (P190)/[PC] (P193) /[Cloud 
Sync. Service] (P195) /[Web service] (P196)/
[AV device] (P197) You can select and send recorded images.
•Send to:
–[Smartphone] 
(P198)/[PC] (P201) /[Cloud 
Sync. Service] (P202) /[Web service] (P203)/
[AV device]  (P204)/[Printer]  (P205) 
						

							- 176 -
Wi-Fi
Remote Shooting
You can remotely operate the camera using a smartphone/tablet.
You need to install “Panasonic Image App” (referred to as “ Image App ” from this point on )  on 
your smartphone/tablet.
The “ Image App ” is an application provided by Panasonic.
•
The service may not be able to be used properly depending on the type of smartphone/tablet being 
used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)
•When downloading the app on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
¢ Connecting to this unit with [Wi-Fi Direct] requi res  Android OS 4.0 or higher and Wi-Fi Direct
TM 
support.
Installing the smartphone/tablet app “ Image App ”
For AndroidTM appsFor iOS apps
Version 1.2 or higher
OS Android 2.2 ~ Android 4.2¢iOS 4.3~ iOS 6.0
Installation 
procedure
1Connect your Android device 
to a network.
2Select “Google PlayTM Store”.3Enter “ Image App ” into the 
search box.
4Select “ Image App ” and 
install it.
•
The icon will be added to the 
menu.
1Connect the iOS device to the 
network.
2Select “App StoreSM”.3Enter “ Image App ” into the search 
box.
4Select “ Image App ” and install it.
•
The icon will be added to the menu. 
						

							- 177 -
Wi-Fi
For details on how to connect easily using the NFC function, refer to P182.
1Press [Wi-Fi].
2Press  3/4 /2/ 1 to select [New Connection], and 
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the 
connection destination from [History Connection]  (P179) or [Favorite 
Connection]  (P180).
3Press  3/4 to select [Remote Shooting], and then press [MENU/
SET].
•
The information (SSID and password) required for directly connecting 
your smartphone/tablet to this unit is displayed.
•To change the connection method, press [DISP.], and then select the 
connection method. For details, refer to “Changing the connection 
method”.  (P178)
Connecting to a smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance.  (P176)
On your smartphone/tablet
(The default connection method is set to [Manual Connection].)
4On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.5Select the SSID that matches the one displayed on the screen of this unit, and then 
enter the password.
6Start “ Image App ” on your smartphone/tablet.  (P176)
•When the connection is complete, live images being captured by the camera are displayed on 
the smartphone/tablet. 
						

							- 178 -
Wi-Fi
∫Changing the connection method
•When connecting with [Via Network]
(On the camera)
1Press  3/4  to select [Via Network], and then press [MENU/SET].2Select the method for connecting to a wireless access point, and set.
•Refer to P185 for details.
(On your smartphone/tablet)
3On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.
4Select the wireless access point you want to connect to, and set.5Start “ Image App ” on your smartphone/tablet.  (P176)
•When connecting with [Wi-Fi Direct] or [WPS Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
•For details on the connection methods, refer to  P187.
(On your smartphone/tablet)2Start “ Image App ” on your smartphone/tablet.  (P176)
Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.•Motion pictures can also be recorded (excluding [FHD/60p/
]/ [FHD/60p]).
•Some settings are not available.•The screen differs dependi ng on the operating system.
Select [ ] on a smartphone/tablet.
•You can save pictures on the smartphone/tablet.
•Motion pictures cannot be played back.•You can send pictures to a WEB service, etc.•The screen differs dependi ng on the operating system.
You can acquire location information from a smartphone/
tablet, and write it on images afterwards. Refer to  P156 for 
how to write the location information on the images 
recorded by this unit.
Select [ ] on a smartphone/tablet.
•
The screen differs dependi ng on the operating system.
Taking pictures via a smartphone/tablet (remote recording)
Playing back pictures in the camera
Sending location information to the camera from a smartphone/tablet 
						

							- 179 -
Wi-Fi
•Read the [Help] in the “ Image App ” menu for further details on how to operate.•To quit [Remote Shooting], press [Q.MENU/ ].•Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when 
you use this function. Use at your own risk.
•If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync], perform 
[Time sync] again.
•On the smartphone/tablet, you can set the acquisition interval of location information and check the 
transfer status of location information. Refer to [Help] in the “ Image App ” menu for details.
•The smartphone/tablet may fail to acquire location information in China and the border area in the 
neighbouring countries of China. (As of January 2013)
•(When using “ Image App ” for iOS)
If you press the Home or On/Off button of a smartph one/tablet while [Rec. loc. Info] is working, 
location information recording is stopped.
If you want to make a Wi-Fi connection with the setting you used before, you can select it from 
the history, and connect.
•
The number of settings that can be saved in the history is limited. It is recommended that you save 
frequently used Wi-Fi connection settings in  [Favorite Connection].  (P180)
•Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Favorite Connection].
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [History Connection], and 
then press [MENU/SET].
3Select the desired connection setting with  3/4 , and then press 
[MENU/SET].
•
To display the connection detail, press [DISP.].•To  save the selected connection setting in [Favorite Connection], read  
steps 
3 and 4 of “Registering to favorites”. (P180)
History Connection 
						

							- 180 -
Wi-Fi
If you register a frequently used Wi-Fi connection, you can quickly call it and connect.
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [History Connection], and 
then press [MENU/SET].
3Select the item you want to register to favorites with 3 /4 , and 
then press  1.
•
To display the connection detail, press [DISP.].
4Enter a registration name.
•For details on how to enter characters, refer to “Entering Text” section 
on  P94 .
•A maximum of 30 characters can be entered.•Up to 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
1Press [Wi-Fi].
2Press  3/4/2 /1  to select [Favorite Connection], and 
then press [MENU/SET].
3Select the desired connection setting with  3/4 , and then press 
[MENU/SET].
•
To display the connection detail, press [DISP.].
•To edit the items saved in [Favorite Connection] , read steps 3 and 4 of 
“Editing the items registered to favorites”.  (P181)
Registering to favorites
Favorite Connection