Panasonic Digital Camera Dmc Ts5 Owners Manual For Advanced Features

							- 241 -
Others
Important!
Be sure to read the following before using the location names that are stored in this 
product.
Personal Use Only.
You agree to use this Data together with this digital camera for the solely personal, 
non-commercial purposes for which you were licensed, and not for service bureau, 
time-sharing or other similar purposes. Accordingly, but subject to the restrictions set forth in 
the following paragraphs, you agree not to otherwise reproduce, copy, modify, decompile, 
disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in 
any form, for any purpose, except to the extent permitted by mandatory laws. Multi-disc sets 
may only be transferred or sold as a complete  set as provided by Panasonic Corporation and 
not as a subset thereof.
Restrictions.
Except where you have been spec ifically licensed to do so by Panasonic Corporation, and 
without limiting the preceding paragraph, you may  not (a) use this Data with any products, 
systems, or applications installed or otherwise co nnected to or in communication with vehicles, 
capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet 
management or similar applications; or (b) wi th or in communication with any positioning 
devices or any mobile or wireless-connected el ectronic or computer devices, including without 
limitation cellular phones, palmtop and handheld computers, pagers, and personal digital 
assistants or PDAs.
Warning.
The Data may contain inaccurate or incomplete information due to the passage of time, 
changing circumstances, sources used and the  nature of collecting comprehensive geographic 
data, any of which may lead to incorrect results.
No Warranty.
This Data is provided to you “as is,” and you agree to use it at your own risk. Panasonic 
Corporation and its licensors (and their li censors and suppliers) make no guarantees, 
representations or warranties of any kind, express or implied,  arising by law or otherwise, 
including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, 
fitness for a particular purpose, usefulness, use or  results to be obtained from this Data, or that 
the Data or server will be uninterrupted or error-free.
User License Agreement for Location Name data 
						

							- 242 -
Others
Disclaimer of Warranty:
PANASONIC CORPORATION AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND 
SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, 
PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR 
NON-INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty 
exclusions, so to that extent the above exclusion may not apply to you.
Disclaimer of Liability:
PANASONIC CORPORATION AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND 
SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR 
ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR 
ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH 
MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY 
LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF 
YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE 
INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN 
ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF PANASONIC 
CORPORATION OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. Some States, Territories and Countries do not allow certain liability 
exclusions or damages limitations, so to t hat extent the above may not apply to you.
Export Control.
Panasonic Corporation shall not export from anywhere any part of the Data or any direct 
product thereof except in compliance with, and  with all licenses and approvals required under, 
applicable export laws, rules and regulations, incl uding but not limited to the laws, rules and 
regulations administered by the Office of Foreign Assets Control of the U.S. Department of 
Commerce and the Bureau of Industry and Security of the U.S. Department of Commerce. To 
the extent that any such export laws, rules or  regulations prohibit NT from complying with any 
of its obligations hereunder to deliver or distribute Data, such failure shall be excused and shall 
not constitute a breach of this Agreement.
Entire Agreement.
These terms and conditions constitute the ent ire agreement between Panasonic Corporation 
(and its licensors, including their licensors and  suppliers) and you pertaining to the subject 
matter hereof, and supersedes in their entirety any and all written or oral agreements 
previously existing between us with respect to such subject matter. 
						

							- 243 -
Others
About the geographical coordinate system
The latitude and longitude standard (geographical coordinate system) recorded with this 
camera is WGS84.
About copyright
According to copyright law, the map data stored in this camera may not be used for purposes 
other than personal use without the permission of the copyright holder.
About navigation functions
This camera is not equipped with a navigation function.
Notices related to licensed software copyright holders
About location information/place name information
© 2012 NAVTEQ. All rights reserved.
“MAPPLE” is a trademark of Shobunsha Publications, Inc.
This data includes information taken with permission from Canadian autho\
rities, 
including © Her Majesty the Queen in Right of Canada, 
© Queen’s Printer for Ontario, © Canada Post Corporation, GeoBase
®, 
© Department of Natural Resources Canada. All rights reserved.
© United States Postal Service
® 2012, USPS®, ZIP+4®
Fuente: INEGI (Instituto Nacional de Estadística y Geografía)
Traffic Codes for Belgium are provided by the Ministerie van de Vlaamse \
Gemeenschap and the Ministère de l’Equipement et des Transports. 
						

							- 244 -
Others
TerritoryNotice
Austria C Bundesamt für Eich- und Vermessungswesen
Croatia C EuroGeographics
Belgium
(If using Traffic 
Codes for Belgium) Traffic Codes for Belgium are provided by the Ministerie van de Vlaamse 
Gemeenschap and the Ministèrie de l’Equipement et des Transports.
Cyprus
C EuroGeographics
Estonia C EuroGeographics
France source: C IGN 2009 – BD TOPO  R
Germany“Die Grundlagendaten wurden mit Genehmigung der zuständigen 
Behörden entnommen” 
or 
“Die Grundlagendaten wurden mit Genehmigung der zustaendigen 
Behoerden entnommen.”
Great BritainContains Ordnance Survey data  C Crown copyright and database right 
2010
Contains Royal Mail data C Royal Mail copyright and database right 2010
Greece ** Copyright Geomatics Ltd.
HungaryCopyright C 2003; Top-Map Ltd.
ItalyLa Banca Dati Italiana è stata prodotta usando quale riferimento anche 
cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana.
Latvia C EuroGeographics
Lithuania C EuroGeographics
Moldova C EuroGeographics
Norway Copyright C 2000; Norwegian Mapping Authority
Poland C EuroGeographics
Portugal Source: IgeoE – Portugal
SloveniaC EuroGeographics
Spain Información geográfica propiedad del CNIG
SwedenBased upon electronic data  C National Land Survey Sweden.
Switzerland Topografische Grundlage:  C Bundesamt für Landestopographie
UkraineC EuroGeographics
Canada “This data includes information taken with permission from 
Canadian authorities, including  C Her Majesty,  C Queen’s Printer 
for Ontario,  C Canada Post, GeoBase R, C  Department of Natural 
Resources Canada. All rights reserved.” 
						

							- 245 -
Others
TerritoryNotice
United States CUnited States Postal Service R 2012.  Prices are not established, 
controlled or approved by the  United States Postal ServiceR.  The 
following trademarks and registrations are owned by the USPS:  United 
States Postal Service, USPS, and ZIP+4.
Australia Copyright. Based on data provided under license from PSMA Australia 
Limited (www.psma.com.au).
Product incorporates data which is  C 2012 Telstra Corporation Limited, 
GM Holden Limited, Intelematics Australia Pty Ltd and Continental Pty 
Ltd.
Australia
(If using RDS-TMC 
Traffic Codes for 
Australia) Product incorporates traffic location codes which is 
C 2012 Telstra 
Corporation Limited and its licensors.
Australia
(If using Actual 
Address Range 
Content for 
Australia) Copyright. Based on data provided under license from PSMA Australia 
Limited (www.psma.com.au).
Nepal
Copyright C Survey Department, Government of Nepal.
Sri Lanka This product incorporates original  source digital data obtained from the 
Survey Department of Sri Lanka
C  2009 Survey Department of Sri Lanka
The data has been used with the permission of the Survey Department of 
Sri Lanka
Israel C Survey of Israel data source
Jordan “C Royal Jordanian Geographic Centre”. The foregoing notice 
requirement for Jordan Data is a material term of the Agreement. If Client 
or any of its permitted sublicensees (if any) fail to meet such requirement, 
NT shall have the right to terminate Client’s license with respect to the 
Jordan Data.
Mozambique Certain Data for Mozambique provided by Cenacarta  C 2012 by 
Cenacarta
Réunion source: C IGN 2009 - BD TOPO R
Ecuador INSTITUTO GEOGRAFICO MILITAR DEL ECUADRO AUTORIZACION 
N° IGM-2011-01- PCO-01 DEL 25 DE ENERO DE 2011
Guadeloupesource: C IGN 2009 - BD TOPO R
Guatemala Aprobado por el INSTITUTO GEOGRAFICO NACIONAL – Resolución 
del IGN No 186-2011
French Guianasource: C IGN 2009 - BD TOPO R
Martinique source: C IGN 2009 - BD TOPO R
Mexico Fuente: INEGI (Instituto Nacional de Estadística y Geografía) 
						

							- 246 -
Others
∫Landmark types
The following points of interest, such as tour ist spots and public facilities, are displayed as 
landmarks.
•
Although approx. 1,000,000 landmarks, are registered in the built-in memory, there are some 
unregistered landmarks. (The registered information is current as of October 2012 and will not be 
updated.)
•It differs from that registered on our GPS-equipped models before 2011.
Zoo Botanical gardenAquarium
Amusement park Golf courseCamp sites
Ski resorts Skating rinksOutdoor activity sites
Famous site, tourist attraction, 
beauty spot Castle, ruins
Shrine
Temple Church Tomb, monument, mound, 
historic site
Airport PortFerry terminal
Baseball park Athletics ground Gymnasium
Park StationPrefectural or state office
Lifts, cable cars Art museum History museum
Theater Cinemas, performing theatres Wineries, sake makers
Mountains, meadows, passes Canyons, mountain streams,  waterfalls, valleys, seashoresTower, high buildings 
						

							- 247 -
Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[GPS feature is not available in this region.]
•
The GPS may not operate in China or close to the Chinese border in neighbouring countries. (As of 
January 2013)
[This picture is protected]
>Delete the picture after canceling the protect setting.  (P170)
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•
Pictures not based on the DCF standard cannot be deleted.
> Format the card after saving necessary data on a PC etc.  (P61)
[Cannot be set on this picture]
•
[Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF standard.
[Built-in memory full]/[Memory card full]/[Not enough space on built-in memory]/[Not 
enough memory on the card]
•
There is no space left on the built-in memory or the card.•When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied 
until the capacity of the card becomes full.
[Some pictures cannot be copied]/[Copy could not be completed]
•
The following pictures cannot be copied.–When a picture with the same name as the picture to be copied exists in the copy destination. 
(Only when copying from a card to the built-in memory.)
–Files not based on the DCF standard.•Moreover, pictures recorded or edited by other equipment may not be copied.
[Built-In Memory Error]/[Format built-in memory?]
•
This message will be displayed when you formatted the built-in memory on a PC.
> Format the built-in memory on the camera again.  (P61) The data on the built-in memory will be 
deleted. 
						

							- 248 -
Others
[Memory card error. 
This card cannot be used in this camera. 
Format this card?]
•
It is a format that cannot be used with this unit.> Insert a different card.
> Format the card again with the camera after saving necessary data on a PC etc.  (P61) Data will 
be deleted.
[Please turn camera off and then on again]/[System Error]
•
This message will be displayed when the lens did not operate properly. > Turn the camera off and on. If the message persists, contact the dealer or Panasonic.
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be 
used]
>Use a card compatible with this unit.  (P24)–SD Memory Card (8 MB to 2 GB)
–SDHC Memory Card (4 GB to 32 GB)–SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error 
Please check the card]
•
It has failed to read or write data.
> Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to 
read or write the data again.
•The card may be broken.
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•In the event that it stops even after using a “Class 4” card or higher, the data writing speed has 
deteriorated so it is recommended to make a backup and then format  (P61).
•Depending on the type of the card, Motion Picture Recording may stop in the middle.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
>Format the card after saving necessary data on a PC etc.  (P61)
> Insert a different card. 
						

							- 249 -
Others
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.> Format the card after saving necessary data on a PC etc.  (P61) If you execute [No.Reset] in the 
[Setup] menu after formatting, the folder number is reset to 100.  (P58)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.  (P59)•This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P222, 226)
[Editing operation cannot proceed as information processing is ongoing.]
•
When a card with pictures deleted or file names changed using a PC or other device is inserted into 
this unit, it will automatically retrieve new info rmation and reconstruct the group pictures. The 
currently retrieving information icon [ ] may be displayed in the playback screen for long 
period of time when there are many image files, and deletion or [Playback] menu cannot be used 
during this time.
If you turn this unit off while information is being retrieved, only the still pictures for which data has 
been retrieved will be saved as the group. When you switch on again, the information retrieval will 
restart from the same point.
[Recording failed.]
•
You may not record when the recording location is too dark/too bright, or if the subject does not 
have enough contrast when recording in 3D.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message  is displayed even when a genuine Panasonic 
battery is used, contact the dealer or Panasonic.
•If the battery terminal is dirty, clean it and remove any objects.
[To prevent water leakage, ensure that the door is locked properly.]
•
Refer to “About the water leakage warning message” on  P23  for details.
[Failed to connect wireless access point]/[Connection failed]/[No destination found]
•
Check following regarding the wireless access point.
> The wireless access point information set on this unit is wrong. Check the authentication type, 
encryption type, and encryption key.  (P186)
> Power of the wireless access point is not turned on.
> Setting of the wireless access point is not supported by this unit.
•Check the network setting of the destination.
•Radio waves from other devices may block the connection to a wireless access point. Check other 
devices that are connected to the wireless access point and devices that use the 2.4 GHz band.
[No picture to send]
•
This is displayed when there is no image to transmit due to the restriction of the destination. Check 
the file type of the image to transmit.  (P174) 
						

							- 250 -
Others
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer 
stopped.]
•
Radio waves from the wireless access point are getting weak. Perform the connection closer to the 
wireless access point.
•There is no reply from the server or it has exceeded the communication processing time. Try again 
after a while.
•Depending on the wireless access point, connection may be automatically disconnected after 
specific time has passed. Reconnect the connection again.
[Upload to the Cloud Folder is available, after Cloud Sync setting has been done on 
downloadable devices such as PC or smartphone.]
•
Devices that download images from a cloud folder are not registered.
•Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” or on a 
smartphone/tablet with “ Image App ”. Refer to P195 for details on [Cloud Sync. Service].
[Connection failed]
•
Check following regarding the smartphones/tablet you intend to connect.
> The smartphone/tablet does not operate.
> Change the access point to connect to in the smartphone/tablet Wi-Fi settings to this camera.
> There is no free storage space on the smartphone/tablet.
[Login failed. Please check Login ID and Password]
•
Login ID or password for the “LUMIX CLUB” is not correct. Please enter it again. If you have 
forgotten the login ID or the password, there is in formation in the login screen of the “LUMIX CLUB” 
website.
[Some files cannot be sent because of destination limit]/[Transfer completed. Some 
files are left because of destination limit.]
•
Check the file format of the image to send.  (P174)•Sending motion pictures may fail if the file size is too large. Split the motion picture using [Video 
Divide]. (P163)
[Unavailable. Please set Login settings on LUMIX CLUB web site.]
•
Login to the “LUMIX CLUB” from your smartphone /tablet or PC, and set the login details of the 
destination WEB service.
[Both picture and video sharing service cannot be selected together]
•
WEB services designed only for pictures, and WEB services designed only for motion pictures 
cannot be selected at the same time. Deselect one of the services.
[Cannot get IP address. Please set wireless AP’s IP address setting to DHCP.]
•
Turn on DHCP settings of the IP address of the connected wireless access points.
[Cannot connect to server]
•
If a message is displaying asking to update the root certificate, agree to update the root certificate.