Panasonic Digital Camera Dmc Sz7 Owners Manual For Advanced Features

- 41 -
Basic
•The number of days that have passed since the departure date can be printed out using the 
“ PHOTOfunSTUDIO ” bundled software on the CD-ROM (supplied).
•The travel date is calculated using the date in the clock setting and the departure date you set. 
If you set [World Time] to the travel destination, the travel date is calculated using the date in 
the clock setting and the travel destination setting.
•The travel date setting is memorized even if the camera is turned off.•The number of...

Basic
- 42 -
•When you connect the camera to a TV, the volume of the TV speakers does not change. Also, 
when connected, no sound is output from the camera speakers.
•Some subjects may appear differently from actuality on the LCD monitor. However, this does 
not affect the recorded pictures.
•When [LCD Mode] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be 
adjusted.
r [Beep]
This allows you to set the beep and shutter sound.
r [Beep Level]:  [Shutter Vol.]:
[t ]
[u ] 
[s ]...

- 43 -
Basic
•High Angle Mode is also canceled if you turn the camera off or [Sleep Mode] is activated.•The brightness of the pictures displayed on the LCD monitor is increased so some subjects 
may appear different from real life on the LCD monitor. However, this does not affect the 
recorded pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording 
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•When [LCD Mode] is set, the usage...

Basic
- 44 -
•When you take pictures with the flash or in dark places, the Histogram is displayed in 
orange because the recorded picture and the Histogram do not match each other.
•The Histogram is an approximation in the Recording Mode.•The Histogram of a picture may not match in the Recording Mode and the Playback Mode.•The Histogram displayed in this camera does not match Histograms displayed by picture 
editing software used in PCs etc.
•Histograms are not displayed in the following...

- 45 -
Basic
•Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].•[Sleep Mode]  is set to  [5 MIN. ]  in the Intelligent Auto Mode.•Press any button to turn on the LCD monitor again.•[Sleep Mode] does not work in the following cases.–When connecting to the AC adaptor (supplied)–When connecting to a PC or a printer–When recording or playing back motion pictures–During a slide show–[Auto Demo]•The effect of the [LCD Power Save] is lower in the Digital Zoom range compared...

Basic
- 46 -
•The folder number is updated and the file number starts from 0001.•A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting 
the card (P48) after saving the data on a PC or elsewhere.
•To reset the folder number to 100, format the built-in memory or the card first and then use this 
function to reset the file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder...

- 47 -
Basic
•This will work when the HDMI mini cable (optional) is connected.•Refer to P 111 for details.
•This will work when the HDMI mini cable (optional) is connected.•Refer to P113  for the method to playback 3D pictures in 3D.
Set to match the type of TV.
| [Output]
[] ([TV Aspect]):
[W ]:
When connecting to a 16:9 screen TV.
[X ]:
When connecting to a 4:3 screen TV.
•
This will work when the AV cable (optional) is connected.
[VIERA Link]
Setup so this unit can be controlled by the remote control...

Basic
- 48 -
•Refer to P32 for information about how to play back pictures.•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif  is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•The...

- 49 -
Basic
•The Stabilizer function is switched between [On] and [Off] every time [MENU/SET] is pressed 
during the [Stabilizer Demo.].
•In Playback Mode, [Stabilizer Demo.] cannot be displayed.•[Stabilizer Demo.] is an approximation.•[Auto Demo] is not output to the television.
 [Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer 
Demo.])
The camera’s features are displayed as slide shows. 
([Auto Demo])
[Stabilizer Demo.]:
AAmount of jitter
B Amount of jitter after...

Recording
- 50 -
RecordingAbout the LCD Monitor
Press [DISP.] to change.
ALCD monitor•When the menu screen appears, the [DISP.] button is not 
activated. During Playback Zoom, while playing back 
motion pictures and during a slide show, you can only 
select 
“Normal display  H” or “No display J”.
¢1 If the [Histogram] in [Setup] menu is set to [ON], histogram will be displayed.
¢ 2 Name of the registered person in [Face Rec og.] is displayed when [DISP.] is pressed.
In Recording ModeBNormal display¢1
C...