Panasonic Digital Camera Dmc Sz7 Owners Manual For Advanced Features

- 21 -
Basic
BasicSelecting the Recording Mode
∫List of Recording Modes
Note
•
When the mode has been switched from Playback Mode to Recording Mode, the previously set 
Recording Mode will be set.
Slide the REC/PLAY switch to [ !].
Press [MODE].
Press  3/4/2/ 1 to select the Recording 
Mode.
Press [MENU/SET].
¦Intelligent Auto Mode  (P22)
The subjects are recorded using settings  automatically selected by the camera.
!Normal Picture Mode (P26)
The subjects are recorded  using your own settings.
Miniature...

Basic
- 22 -
Recording Mode: 
Taking pictures using the automatic function 
(Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording 
conditions so we recommend this mode for beginners or those who want to leave the 
settings to the camera and take pictures easily.
•
The following functions are activated automatically.–Scene Detection /Backlight Compensation/Intelligent ISO sensitivity control/Auto White 
Balance/ Face Detection/[Quick...

- 23 -
Basic
When the camera identifies the optimum scene, the icon of the scene concerned is 
displayed in blue for 2 seconds, after which its color changes to the usual red.
When taking pictures
When recording motion pictures
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.•When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s face, and it 
will adjust the focus and exposure. (Face Detection)
•If a tripod is used, for instance, and the camera...

Basic
- 24 -
Following menus can be set.
•
For the setting method of the menu, refer to P38.
¢ Settings may be different from other Recording Modes.
∫[Burst]  (P83)
[Burst] can be set in [ ]. In this setting, t he burst speed is automatically adjusted based 
on the movement of the subject.
∫ [Color Mode]
Color setting of [Happy] is available in [Color Mode]. It is possible to automatically take a 
picture with a higher level of brilliance for the color brightness and vividness.
∫ [Motion Deblur]
When...

- 25 -
Basic
∫[iHandheld Nite Shot]
When [iHandheld Nite Shot] is set to [ON] and [ ] is detected while taking handheld night 
shots, pictures of the night scenery will be taken at a high burst speed and composed into 
a single picture. This mode is useful if you want to take stunning night shots with minimal 
jitter and noise, without using a tripod. If the camera is mounted on a tripod or other type of 
stand, [ ] will not be detected.
∫ [iHDR] (Backlight Compensation)
When [iHDR] is set to [ON],...

Basic
- 26 -
Recording Mode: 
Taking pictures with your favorite settings 
(Normal Picture Mode)
The camera automatically sets the shutter speed and the aperture value according to the 
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec] 
menu.
Slide the REC/PLAY switch to [ !], 
and then press [MODE].
Press  3/4/2/ 1 to select [Normal Picture], 
and then press [MENU/SET].
Aim the AF area at the point you want to focus on.
Press the shutter...

- 27 -
Basic
Focusing
Aim the AF area at the subject, and then 
press the shutter button halfway.
•The AF area may be displayed larger for certain zoom magnifications and in dark places.
∫About focus range
The focus range is displayed when operating the zoom.
•
The focus range is displayed in red when it is not focused after pressing 
the shutter button halfway.
The focus range may change gradually depending on the zoom 
position.
e.g.: Range of focus during the Intelligent Auto Mode
FocusWhen the...

Basic
- 28 -
∫When the subject is not in focus (such as when it is not in the center of the 
composition of the picture you want to take)
1Aim the AF area at the subject, and press 
the shutter button halfway to fix the focus 
and exposure.
2Press and hold the shutter button 
halfway while moving the camera as you 
compose the picture.
•
You can repeatedly retry the actions in step 1 before pressing the shutter button fully.
∫ Subject and recording conditions which are difficult to focus in
•Fast-moving...

- 29 -
Basic
Applicable modes: 
Recording Motion Pictures
Start recording by pressing the motion picture 
button.
AAvailable recording time
B Elapsed recording time
•You can record motion pictures fitting each Recording Mode.•Release the motion picture button right after you press it.•The recording state indicator (red)  C will flash while recording 
motion pictures.
•For the setting of the [Rec Mode] and [Rec Quality], refer to 
P86 .
Stop the recording by pressing the motion picture button again....

Basic
- 30 -
Note
•When recording to the built-in memory, the [MP4] setting is fixed to [VGA].•The available recording time displayed on the screen may not decrease regularly.•Depending on the type of the card, the card access indication may appear for a while after 
recording motion pictures. This is not a malfunction.
•The screen may be blacked out momentarily, or the unit may record noise due to static 
electricity or electromagnetic waves, etc. depending on the environment of the motion picture...