Panasonic Digital Camera Dmc Lc1 Operating Instructions

Playback (advanced)
91
4Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
resized picture.
 When resized pictures are 
overwritten, they cannot be 
restored.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the resizing.
¬Suggestions/Tips ¬
 The following pictures cannot be 
resized.
– Pictures not over 640k480 pixels
– Pictures recorded after setting the 
picture size to...

Playback (advanced)
92
Trimming the Pictures
Preparation
 Set the operational mode dial to playback mode [ ]. (P30)
1Select [TRIMMING].
2Select the picture to trim.
3Enlarge/decrease or shift the 
picture.
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
EXITSET SELECTMENU
MENU
REVIEWREVIEW
TRIMMING2560
100_
00011/19
EXITSETSELECTMENU
REVIEWREVIEW
REVIEWREVIEW
LC1PP.book  92 ページ  ２００４年１月２６日　月曜日　午後６時５０分 

Playback (advanced)
93
4Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
resized picture.
 When trimmed pictures are 
overwritten, they cannot be 
restored.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the trimming.¬Suggestions/Tips ¬
 The following pictures cannot be 
trimmed.
– Pictures smaller than 640k480 
pixels
– Pictures recorded after setting the 
picture size...

Playback (advanced)
94
Formatting the Card
Preparation
 Set the operational mode dial to playback mode [ ]. (P30)
1Select [FORMAT].
2Select [YES] to format.
¬Suggestions/Tips ¬
 Usually, it is not necessary to format 
the card (initializing). Format the card 
when the message [MEMORY CARD 
ERROR] appears.
 If the card has been formatted by a PC 
or other equipment, format the card on 
the camera again.
 After formatting, recorded pictures and 
any other data cannot be recovered.
 If the card is...

Playback (advanced)
95
Playing Back Pictures with a TV Screen
ªPlaying back pictures with AV cable (supplied)
 Turn the camera and the TV off.
1Connect the AV cable to the 
[AV OUT/REMOTE] socket of the 
camera.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
 Yellow: to the video input socket
 White: to the audio input socket
3Turn the TV on and select external 
input.
4Turn the camera on and then set 
to playback mode [ ].
ªViewing pictures in other 
countries
When...

Playback (advanced)
96
Before Connecting with USB Connection 
Cable
Select the USB communication system according to the OS of your PC or your 
printer before connecting them to the camera with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P26)
1Select [USB MODE].
(In the recording mode)2Select [Mass Storage] or [PTP].
MENU
RECSETUP3/3
ENGLANGUAGE
EXITSET SELECTMENU
RESETUSB MODE
REVIEW
REVIEW
REVIEW
Mass StoragePTP
USB MODE
USB
Direct-PrintPictBridge
SETSELECT...

Playback (advanced)
97
ªWhen using Windows 2000 Professional, Windows Me, Windows 98/98 SE 
or Mac OS 9.x
 When connecting the camera to a PC, do not set [USB MODE] to [PTP].
(When the camera is shipped, [Mass Storage] is selected.)
 When using [Mass Storage] on Windows 98/98 SE, install the USB driver before 
connecting. (When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you 
do not have to install the USB driver.)
 When connecting to a PC which includes the 
above-mentioned OS and when setting...

Playback (advanced)
98
Connecting to a PC (Mass Storage)
When you connect to the camera to a PC supporting USB 2.0 (High Speed), you 
can transfer the data with higher speed in a shorter period of time.
1Turn the camera on and then set 
[USB MODE] to [Mass Storage]. 
(P96)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The drive appears on the 
[My Computer] folder. If it is the first time that you are 
connecting the camera to a PC, the 
required driver is installed...

Playback (advanced)
99
Connecting to a PC (PTP)
Do not follow the setting below on the OS except for Windows XP and Mac OS X.
1Turn the camera on and then set 
[USB MODE] to [PTP]. (P96)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The camera icon appears on the 
[My Computer] folder. If it is the first time that you are 
connecting the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play,...

Playback (advanced)
100
¬Suggestions/Tips ¬
 Refer to P97 carefully when 
connecting to the OS except for 
Windows XP and Mac OS X while 
setting [USB MODE] to [PTP].
 When connecting to a PC, we 
recommend using the AC adaptor as 
the power source.
 If the remaining battery power 
becomes low during communication, 
the power indicator blinks and the 
alarm beeps. In this case, stop the 
communication. Then turn the camera 
off and charge the battery.
 When connecting to a PC, pictures 
and sounds...