Panasonic Digital Camera Dmc Lc1 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Camera Dmc Lc1 Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
Recording pictures (basic) 41 Taking Pictures with Manual Focus Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate the auto focus. Preparation Set the operational mode dial except for [ ]. (P30) 1Select [MF ASSIST] from the [SETUP] menu (in the recording mode) (P23) and then set it to [MF1] or [MF2]. Close the menu by pressing the [MENU] button after finishing the setting.2Rotate the focus ring to...
Page 42
Recording pictures (basic) 42 ªMF ASSIST When you rotate the focus ring while setting [MF ASSIST] to [MF1] or [MF2], the MF assistance is activated and the screen is enlarged. It allows you to focus on the subject more easily. [MF1]: The center of the screen is enlarged. You can adjust the focus while determining composition of the whole of the screen. [MF2]: The whole of the screen is enlarged. It is convenient for adjusting the focus in Wide. [OFF]: The screen is not enlarged. The MF...
Page 43
Recording pictures (basic) 43 Checking the Recorded Picture (Review) Preparation In Motion image mode, review function is not activated. 1Press 4/[REVIEW]. The last recorded picture appears for about 10 seconds. Press the shutter button halfway or 4/[REVIEW] to cancel the review. You can check the previous or following picture with 2/1. When the recorded pictures are too bright or dim, compensate the exposure. (P48)2Enlarge and shift the picture. A:1k >4k>8k B:8k>4k>1k C: It moves the...
Page 44
Recording pictures (basic) 44 Using the Optical Zoom You can record people and objects at a wide angle with 1k of optical zoom (35 mm-camera equivalent: 28 mm), or you can zoom in on landscapes up to 3.2k of optical zoom (35 mm-camera equivalent: 90 mm) by rotating the zoom ring. Preparation Set the operational mode dial except for [ ]. (P30) ªTo make subjects appear further away (Wide)ªTo make subjects appear closer (Tele) ¬ Suggestions/Tips ¬ The picture may be slightly distorted according to...
Page 45
Recording pictures (basic) 45 Taking Pictures Using the Built-in Flash Preparation Set the operational mode dial except for [ ]. (P30) ªTo open the flash Press the [ OPEN] button. ªTo close the flash Press the flash until it clicks. Be sure to close the flash when not in use. ªSwitching to the appropriate flash setting :AUTO The flash is automatically activated according to the recording condition. : AUTO/Red-eye reduction The flash is automatically activated according to the recording...
Page 46
Recording pictures (basic) 46 : Forced OFF Even in dark places, the flash is not activated. Use this when taking pictures in places where use of the flash is not allowed. Refer to P72 for setting the 1st and 2nd curtain. ªAvailable flash settings ¢When setting to the 2nd Curtain Synchro, flash setting is not available. ªThe available flash range to take pictures Refer to P37 for the focus range. ªAdjusting flash output Adjust the flash output when the subject is small or reflection ratio is...
Page 47
Recording pictures (basic) 47 on the subject or the skin color of the subject may be turned white. In this case, you can defuse the shadows and take pictures naturally by using bounce flash. You can slant the flash at a 65o angle. (Bounce flash lock) Aim the flash at the ceiling and take the picture. We recommend setting the white balance to [AUTO] (P62). ¬ Suggestions/Tips ¬ In Motion image mode or when the flash is closed, flash setting is fixed to the Forced OFF [ ]. Do not stare at the...
Page 48
Recording pictures (basic) 48 Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background. Preparation Set the operational mode dial except for [ ]. (P30) 1Press [ ] until [ EXPOSURE] appears on the screen to compensate the exposure. You can compensate from j2EV to i2 EV in steps of 1/3 EV.¬Suggestions/Tips ¬ EV is an abbreviation of Exposure Value, and it is the amount of light given to...
Page 49
Recording pictures (basic) 49 Taking Pictures Using Auto Bracket This mode allows you to take pictures automatically according to the compensation range of the exposure by pressing the shutter button only once. You can select the picture with the desired exposure among different exposures. Preparation Set the operational mode dial except for [ ]. (P30) 1Press [ ] until [ AUTO BRACKET] appears on the screen to set the compensation range of the exposure. You can select the auto bracket from 0...
Page 50
Recording pictures (basic) 50 Taking Pictures with the Self-timer Preparation Set the operational mode dial except for [ ]. (P30) 1Switch the self-timer setting. : Self-timer set to 10 seconds ; : Self-timer set to 2 seconds ; No display (canceled)2Focus on the subject to take the picture. If you press the [MENU] button when the self-timer is set, the self-timer setting is canceled. ¬Suggestions/Tips ¬ When using a tripod or in other cases, setting the self-timer to 2 seconds is a convenient...