Panasonic Digital Camera Dmc Lc1 Operating Instructions

							Playback (advanced)
91
4Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
resized picture.
 When resized pictures are 
overwritten, they cannot be 
restored.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the resizing.
¬Suggestions/Tips ¬
 The following pictures cannot be 
resized.
– Pictures not over 640k480 pixels
– Pictures recorded after setting the 
picture size to [HDTV]
– Pictures taken after setting the 
quality to [ ]
– Motion images
– Flip animation
– Pictures with audio
– Rotated pictures (You can resize 
them if you turn them back.)
 It may not be possible to resize 
pictures recorded with other 
equipment.
DELETE ORIGINAL
PICTURE?
YESNO
RESIZE
SET SELECTCANCELMENU
REVIEWREVIEW
RAW
LC1PP.book  91 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
92
Trimming the Pictures
Preparation
 Set the operational mode dial to playback mode [ ]. (P30)
1Select [TRIMMING].
2Select the picture to trim.
3Enlarge/decrease or shift the 
picture.
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
EXITSET SELECTMENU
MENU
REVIEWREVIEW
TRIMMING2560
100_
00011/19
EXITSETSELECTMENU
REVIEWREVIEW
REVIEWREVIEW
LC1PP.book  92 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
93
4Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When the original picture is 
protected, you cannot overwrite the 
resized picture.
 When trimmed pictures are 
overwritten, they cannot be 
restored.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the trimming.¬Suggestions/Tips ¬
 The following pictures cannot be 
trimmed.
– Pictures smaller than 640k480 
pixels
– Pictures recorded after setting the 
picture size to [HDTV]
– Pictures taken after setting the 
quality to [ ]
– Motion images
– Flip animation
– Pictures with audio
– Rotated pictures (You can trim them 
if you rotate them back.)
 It may not be possible to trim pictures 
recorded with other equipment.
 The picture size of the trimmed 
pictures may become smaller than that 
of the original one depending on the 
cut size.
 The picture quality of the trimmed 
picture may be deteriorated.
 You cannot use the remote shutter 
when setting the trimming parts.
DELETE ORIGINAL
PICTURE?
YESNO
SET SELECTCANCELMENU
TRIMMING
REVIEWREVIEW
RAW
LC1PP.book  93 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
94
Formatting the Card
Preparation
 Set the operational mode dial to playback mode [ ]. (P30)
1Select [FORMAT].
2Select [YES] to format.
¬Suggestions/Tips ¬
 Usually, it is not necessary to format 
the card (initializing). Format the card 
when the message [MEMORY CARD 
ERROR] appears.
 If the card has been formatted by a PC 
or other equipment, format the card on 
the camera again.
 After formatting, recorded pictures and 
any other data cannot be recovered.
 If the card is formatted all images 
and data will be permanently 
erased. They cannot be reclaimed. 
If any important pictures are on the 
card, please copy them to your PC 
before proceeding.
 During formatting, do not turn the 
camera off.
 When the remaining battery power 
(P11) is low, use the AC adaptor.
 If the card is protected, you cannot 
format the card.
 If the card cannot be formatted, 
consult your nearest servicenter.
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
EXITSET SELECTMENU
MENU
REVIEWREVIEW
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
YESNO
SETSELECT
REVIEWREVIEW
For USA assistance, please call: 1-800-272-7033 
or send e-mail to : [email protected]
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
LC1PP.book  94 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
95
Playing Back Pictures with a TV Screen
ªPlaying back pictures with AV cable (supplied)
 Turn the camera and the TV off.
1Connect the AV cable to the 
[AV OUT/REMOTE] socket of the 
camera.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
 Yellow: to the video input socket
 White: to the audio input socket
3Turn the TV on and select external 
input.
4Turn the camera on and then set 
to playback mode [ ].
ªViewing pictures in other 
countries
When setting [VIDEO OUT] on the 
menu (P26), you can view pictures on a 
TV in other countries (regions) which 
use the NTSC or PAL system.
 Even if you set menu selection for 
[VIDEO OUT] to [PAL], the output 
signal is still NTSC in the recording 
mode.
ªPlayback pictures on TV with SD 
Memory Card slot
An SD Memory Card can be played 
back on TVs with an SD Memory Card 
slot.
If you play back pictures recorded using 
[HDTV] mode on a High-Definition TV, 
(HDTV has 16:9 aspect) the picture 
quality will be higher.
¬
Suggestions/Tips ¬
 When connecting to a TV, we 
recommend using the AC adaptor as 
the power source.
 Use the supplied AV cable only.
 The image is displayed on the TV only 
in playback mode.
 Read the TV operating instructions 
too.
 When you set the video output to 
[PAL], if connecting/disconnecting the 
AV cable in playback mode, the 
following occur.
–The screen becomes dark for a 
moment.
–During playing back of motion 
images, images and sounds are 
interrupted.
1 2
AV OUT/ 
REMOTE
DC IN USB
LC1PP.book  95 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
96
Before Connecting with USB Connection 
Cable
Select the USB communication system according to the OS of your PC or your 
printer before connecting them to the camera with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P26)
1Select [USB MODE].
(In the recording mode)2Select [Mass Storage] or [PTP].
MENU
RECSETUP3/3
ENGLANGUAGE
EXITSET SELECTMENU
RESETUSB MODE
REVIEW
REVIEW
REVIEW
Mass StoragePTP
USB MODE
USB
Direct-PrintPictBridge
SETSELECT
REVIEWREVIEW
USB modePC to be connectedPrinter to be 
connected
Mass Storage
(USB Direct-Print)Windows
® XP Home Edition, 
Windows XP Professional, Windows 
2000 Professional, Windows Me, 
Windows 98/98 SE or Mac OS X 
(10.1 or above), Mac OS 9.xPrinters supporting 
USB Direct-Print
PTP
(PictBridge)Windows XP Home Edition, Windows 
XP Professional or Mac OS XPrinters supporting 
PictBridge
LC1PP.book  96 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
97
ªWhen using Windows 2000 Professional, Windows Me, Windows 98/98 SE 
or Mac OS 9.x
 When connecting the camera to a PC, do not set [USB MODE] to [PTP].
(When the camera is shipped, [Mass Storage] is selected.)
 When using [Mass Storage] on Windows 98/98 SE, install the USB driver before 
connecting. (When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you 
do not have to install the USB driver.)
 When connecting to a PC which includes the 
above-mentioned OS and when setting the [USB MODE] to 
[PTP], the messages shown on the right appear on the LCD 
monitor of the camera.
The following messages appear for each OS on the display of the PC. Select 
[Cancel] to close the window and disconnect the USB connection cable.
PTP
USB MODE
OSMessage
Windows 2000 Professional [Welcome to the Found New Hardware 
Wizard]
Windows Me
Windows 98/98 SE[New Hardware Found]>
[Add New Hardware Wizard]
(When you connect to the PC more than 
2 times, only [Add New Hardware Wizard] 
appears.)
Mac OS 9.x [Software needed for the USB device 
“DMC-LC1” is not available. Would you like to 
look for the software on the Internet?]
LC1PP.book  97 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
98
Connecting to a PC (Mass Storage)
When you connect to the camera to a PC supporting USB 2.0 (High Speed), you 
can transfer the data with higher speed in a shorter period of time.
1Turn the camera on and then set 
[USB MODE] to [Mass Storage]. 
(P96)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The drive appears on the 
[My Computer] folder. If it is the first time that you are 
connecting the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play, then it appears on 
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
¬Suggestions/Tips ¬
 When connecting to a PC, we 
recommend using the AC adaptor as 
the power source.
 If the remaining battery power 
becomes low during communication, 
the power indicator blinks and the 
alarm beeps. In this case, stop the 
communication. Then turn the camera 
off and charge the battery.
 When connecting to a PC, pictures 
and sounds are not output from the 
[AV OUT/REMOTE] socket.
 Use the supplied USB connection 
cable only.
 When you connect the camera to a PC 
supporting USB 2.0 (High Speed), be 
careful of the followings.
 When you connect 2 or more USB 
devices to a PC, or you connect the 
camera with a USB hub or USB 
extension cables, normal operation 
is not guaranteed.
 When you connect the camera to 
the USB terminal on a key board, it 
may not be operated properly.
 Also refer to the operating instructions 
of a PC.AV OUT/ 
REMOTE
DC IN USB
ACCESS
LC1PP.book  98 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
99
Connecting to a PC (PTP)
Do not follow the setting below on the OS except for Windows XP and Mac OS X.
1Turn the camera on and then set 
[USB MODE] to [PTP]. (P96)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The camera icon appears on the 
[My Computer] folder. If it is the first time that you are 
connecting the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play, then the camera 
icon appears on the [My Computer] 
folder.
[Macintosh]
You can read pictures with image 
capture or iPhoto.
AV OUT/ 
REMOTE
DC IN USB
ACCESS
LC1PP.book  99 ページ  ２００４年１月２６日　月曜日　午後６時５０分 
						

							Playback (advanced)
100
¬Suggestions/Tips ¬
 Refer to P97 carefully when 
connecting to the OS except for 
Windows XP and Mac OS X while 
setting [USB MODE] to [PTP].
 When connecting to a PC, we 
recommend using the AC adaptor as 
the power source.
 If the remaining battery power 
becomes low during communication, 
the power indicator blinks and the 
alarm beeps. In this case, stop the 
communication. Then turn the camera 
off and charge the battery.
 When connecting to a PC, pictures 
and sounds are not output from the 
[AV OUT/REMOTE] socket.
 It may take time to display the 
communication screen depending on 
the PC.
 You can only load pictures from the 
camera and cannot write them on the 
card or delete them.
 Use the supplied USB connection 
cable only.
 When there are 1000 or more pictures 
on the card, the pictures may not be 
imported.
 When the PC recovers from the 
standby mode while connecting it to a 
camera with USB connection cables, 
they may not properly communicate 
with each other.
LC1PP.book  100 ページ  ２００４年１月２６日　月曜日　午後６時５０分