Panasonic Digital Camera Dmc L10 Operating Instructions

Connecting to other equipment
121VQT1G28
1Turn on the camera and the 
printer.
2Connect the camera to a printer 
via the USB connection cable 
(supplied).
Connect the USB connection cable with 
the [ ] mark facing the [2] mark on 
the [DIGITAL] socket.
Hold the USB connection cable at C 
and insert straight in or take straight 
out.
3Press 4 to select 
[PictBridge (PTP)] and then press 
[MENU/SET].
If you set [USB MODE] in the [SETUP] 
menu to [PictBridge (PTP)] in advance, 
it is not necessary to set...

Connecting to other equipment
122VQT1G28
∫Setting date printing, the number of 
prints, the paper size and the page 
layout
Select and set each item in step
3.
 Items not supported by the printer are 
displayed in gray and cannot be selected.
 When you want to print pictures in a paper 
size or a layout which is not supported by 
the camera, set [PAPER SIZE] or 
[PAGE LAYOUT] to [ ] and then set the 
paper size or the layout on the printer. (For 
details, refer to the operating instructions 
of the...

Connecting to other equipment
123VQT1G28
3Disconnect the USB connection 
cable after printing.
∫Setting the date printing with the 
DPOF print in advance
We recommend setting DPOF date printing 
with [DPOF PRINT] (P112) in advance 
when the printer supports it. If you select 
[DPOF PICTURE], printing starts and the 
recording date is printed.
∫Layout printing
 When printing a picture several times 
on 1 sheet of paper
For example, if you want to print a picture 
4 times on 1 sheet of paper, set 
[PAGE...

Connecting to other equipment
124VQT1G28
Playing Back Pictures 
on a TV Screen
∫Playing back pictures using the Video 
cable (supplied)
 Set the [TV ASPECT]. (P31)
 Turn the camera and the TV off.
1Connect the video cable A to the 
[V. OUT] socket on the camera.
Connect the video cable with the [ ] 
mark facing the [2] mark on the 
[DIGITAL] socket.
Hold the video cable at B and insert 
straight in or take straight out.
2Connect the video cable to the 
video input socket on the TV.
1 Yellow: to the video...

Others
125VQT1G28
Others
Using the External 
Flash
If you use an external flash, the available 
flash range increases compared to the 
camera’s built in flash.
∫Using the dedicated flash 
(DMW-FL500; optional)
1Attach the dedicated flash to the 
hot shoe A and then turn on the 
camera and the dedicated flash.
Be sure to firmly secure to the 
dedicated flash with the lock ring B.
2Press [MENU/SET] to display the 
menu.
3Press 3/4/2/1 to select 
[FLASH] in the [REC] menu [ ] 
and then press 1.
4Press 3/4...

Others
126VQT1G28
 If you use commercially available external 
flashes with communication functions 
other than the dedicated one, they may 
not operate normally or they may be 
damaged. Do not use them.
 Even if the external flash is turned off, 
the camera may enter the external flash 
mode when the external flash is 
attached. When you are not using the 
external flash, detach it.
 When attaching the external flash, the 
built-in flash cannot be activated.
 Do not open the built-in flash when an...

Others
127VQT1G28
 If the MC protector/PL filter are dropped, 
they may be destroyed. Be careful not to 
drop them when attaching them to the 
camera.
 You can attach the lens cap or the lens 
hood when the MC Protector and the PL 
Filter are attached.
 Read the operating instructions of the MC 
protector or the PL filter for details.
 Use the MC protector (DMW-LMCH67; 
optional) and the PL filter (DMW-LPL67; 
optional) with the supplied lens.
u“Multi-coated”
PLu“Polarizing lens filter”
Using the Remote...

Others
128VQT1G28
Using the AC Adaptor
You can use the camera without worrying 
about battery discharge when it is 
connected to a PC or a printer if you use 
the DC cable (DMW-DCC1; optional) to 
connect the camera to the battery charger/
AC adaptor (supplied) and connect the AC 
cable.
 Check that the camera is turned off.
 Close the flash.
1Connect the AC cable.
2Connect the DC cable A.
Pull open the DC cable cover 1 and 
then connect the DC cable to the 
camera body using the same steps as...

Others
129VQT1G28
Displaying the Time at 
the Travel Destination 
(World Time)
If you set your home area and the travel 
destination area when traveling abroad 
etc., the local time at the travel destination 
area can be displayed on the screen and 
recorded on the pictures taken.
 Select [CLOCK SET] to set the current 
date and time in advance. (P24) 
1Press [MENU/SET] to display the 
menu.
2Press 3/4/2/1 to select 
[WORLD TIME] in the [SETUP] 
menu [ ] and then press 1.
If you are setting the world...

Others
130VQT1G28
∫Setting the travel destination area
(Perform steps1, 2 .)
1Press 3 to select [DESTINATION] and 
then press [MENU/SET] to set.
ADepending on the setting, the time at 
the travel destination area or the home 
area is displayed.
If you are setting the travel destination 
area for the first time, the date and time 
are displayed as shown in the screen.
2Press 2/1 to select the area the travel 
destination is in and then press 
[MENU/SET] to set.
The current time at the selected travel...