Panasonic Digital Camera Dmc L10 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Camera Dmc L10 Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
Menu Settings
111VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫Rotate display (The picture is
automatically rotated and displayed.)
1Press 4 to select [ON] and then
press [MENU/SET].
The pictures are displayed without
being rotated when you select [OFF].
2Press [MENU/SET] to close the
menu.
Pictures...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-110.png "Page 111
Menu Settings
111VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫Rotate display (The picture is
automatically rotated and displayed.)
1Press 4 to select [ON] and then
press [MENU/SET].
The pictures are displayed without
being rotated when you select [OFF].
2Press [MENU/SET] to close the
menu.
Pictures...")
Menu Settings 111VQT1G28 Press [ ] to display the [PLAY] mode menu and select the item to set. (P108) This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90° steps. ∫Rotate display (The picture is automatically rotated and displayed.) 1Press 4 to select [ON] and then press [MENU/SET]. The pictures are displayed without being rotated when you select [OFF]. 2Press [MENU/SET] to close the menu. Pictures...
Page 112
![Page 112
Menu Settings
112VQT1G28
When [ROTATE DISP.] is set to [ON],
pictures recorded holding the camera
vertically are played back vertically
(rotated).
(You can only use this when using a lens
that supports the direction detection
function. (P13))
If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically. (P35)
The picture may be slightly blurred when
the camera is connected to the TV with
the video cable (supplied) and played
back...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-111.png "Page 112
Menu Settings
112VQT1G28
When [ROTATE DISP.] is set to [ON],
pictures recorded holding the camera
vertically are played back vertically
(rotated).
(You can only use this when using a lens
that supports the direction detection
function. (P13))
If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically. (P35)
The picture may be slightly blurred when
the camera is connected to the TV with
the video cable (supplied) and played
back...")
Menu Settings 112VQT1G28 When [ROTATE DISP.] is set to [ON], pictures recorded holding the camera vertically are played back vertically (rotated). (You can only use this when using a lens that supports the direction detection function. (P13)) If you take pictures when aiming the camera up or down, it may not be possible to display the pictures vertically. (P35) The picture may be slightly blurred when the camera is connected to the TV with the video cable (supplied) and played back...
Page 113
![Page 113
Menu Settings
113VQT1G28
The number of prints can be set from 0
to 999. The DPOF print setting is
canceled when the number of prints is
set to [0].
2Press [MENU/SET] twice to close
the menu.
∫Multi setting
1Press 2/1 to select the picture to
print and then press 3/4 to set
the number of prints.
The number of prints icon [ ] B
appears.
Repeat the above procedure. (You
cannot set all the pictures at one time.)
The number of prints can be set from 0
to 999. The DPOF print setting is
canceled when...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-112.png "Page 113
Menu Settings
113VQT1G28
The number of prints can be set from 0
to 999. The DPOF print setting is
canceled when the number of prints is
set to [0].
2Press [MENU/SET] twice to close
the menu.
∫Multi setting
1Press 2/1 to select the picture to
print and then press 3/4 to set
the number of prints.
The number of prints icon [ ] B
appears.
Repeat the above procedure. (You
cannot set all the pictures at one time.)
The number of prints can be set from 0
to 999. The DPOF print setting is
canceled when...")
Menu Settings 113VQT1G28 The number of prints can be set from 0 to 999. The DPOF print setting is canceled when the number of prints is set to [0]. 2Press [MENU/SET] twice to close the menu. ∫Multi setting 1Press 2/1 to select the picture to print and then press 3/4 to set the number of prints. The number of prints icon [ ] B appears. Repeat the above procedure. (You cannot set all the pictures at one time.) The number of prints can be set from 0 to 999. The DPOF print setting is canceled when...
Page 114
![Page 114
Menu Settings
114VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can set protection for pictures you do
not want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
∫Single setting
1Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2Press [MENU/SET] twice to close
the menu.
∫Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P112 to 113)
The protect...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-113.png "Page 114
Menu Settings
114VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can set protection for pictures you do
not want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
∫Single setting
1Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2Press [MENU/SET] twice to close
the menu.
∫Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P112 to 113)
The protect...")
Menu Settings 114VQT1G28 Press [ ] to display the [PLAY] mode menu and select the item to set. (P108) You can set protection for pictures you do not want to be deleted by mistake. Press 3/4 to select [SINGLE], [MULTI] or [CANCEL] and then press [MENU/SET]. ∫Single setting 1Press 2/1 to select the picture and then press 4 to SET/ CANCEL. 2Press [MENU/SET] twice to close the menu. ∫Multi setting/To cancel all settings Perform the same operation as in “[DPOF PRINT]”. (P112 to 113) The protect...
Page 115
![Page 115
Menu Settings
115VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can reduce the size of a recorded
picture.
1Press 2/1 to select the picture
and then press 4.
2Press 2/1 to select the size and
then press 4.
Sizes smaller than the recorded picture
are displayed.
The message [DELETE ORIGINAL
PICTURE?] appears.
3Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
The picture is overwritten when you
select [YES]. Resized pictures cannot
be restored...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-114.png "Page 115
Menu Settings
115VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can reduce the size of a recorded
picture.
1Press 2/1 to select the picture
and then press 4.
2Press 2/1 to select the size and
then press 4.
Sizes smaller than the recorded picture
are displayed.
The message [DELETE ORIGINAL
PICTURE?] appears.
3Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
The picture is overwritten when you
select [YES]. Resized pictures cannot
be restored...")
Menu Settings 115VQT1G28 Press [ ] to display the [PLAY] mode menu and select the item to set. (P108) You can reduce the size of a recorded picture. 1Press 2/1 to select the picture and then press 4. 2Press 2/1 to select the size and then press 4. Sizes smaller than the recorded picture are displayed. The message [DELETE ORIGINAL PICTURE?] appears. 3Press 3/4 to select [YES] or [NO] and then press [MENU/SET]. The picture is overwritten when you select [YES]. Resized pictures cannot be restored...
Page 116
![Page 116
Menu Settings
116VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can enlarge and then clip the important
part of the recorded picture.
1Press 2/1 to select the picture
and then press 4.
2Enlarge or decrease the parts to
be trimmed with the rear dial.
3Press 3/4/2/1 to move the
position of the part to be trimmed.
4Press shutter button.
The message [DELETE ORIGINAL
PICTURE?] appears.
5Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
The picture is...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-115.png "Page 116
Menu Settings
116VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can enlarge and then clip the important
part of the recorded picture.
1Press 2/1 to select the picture
and then press 4.
2Enlarge or decrease the parts to
be trimmed with the rear dial.
3Press 3/4/2/1 to move the
position of the part to be trimmed.
4Press shutter button.
The message [DELETE ORIGINAL
PICTURE?] appears.
5Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
The picture is...")
Menu Settings 116VQT1G28 Press [ ] to display the [PLAY] mode menu and select the item to set. (P108) You can enlarge and then clip the important part of the recorded picture. 1Press 2/1 to select the picture and then press 4. 2Enlarge or decrease the parts to be trimmed with the rear dial. 3Press 3/4/2/1 to move the position of the part to be trimmed. 4Press shutter button. The message [DELETE ORIGINAL PICTURE?] appears. 5Press 3/4 to select [YES] or [NO] and then press [MENU/SET]. The picture is...
Page 117
![Page 117
Menu Settings
117VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can convert pictures taken with a
[ ] aspect ratio to a [ ] or a [ ]
aspect ratio for printing.
1Press 3/4 to select [ ] or
[ ] and then press [MENU/SET].
2Press 2/1 to select a picture and
then press 4.
If you select and set a picture with an
aspect ratio other than [ ], the
message [CANNOT BE SET ON THIS
PICTURE] is displayed on the screen.
3Press 2/1 to determine the
horizontal position...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-116.png "Page 117
Menu Settings
117VQT1G28
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P108)
You can convert pictures taken with a
[ ] aspect ratio to a [ ] or a [ ]
aspect ratio for printing.
1Press 3/4 to select [ ] or
[ ] and then press [MENU/SET].
2Press 2/1 to select a picture and
then press 4.
If you select and set a picture with an
aspect ratio other than [ ], the
message [CANNOT BE SET ON THIS
PICTURE] is displayed on the screen.
3Press 2/1 to determine the
horizontal position...")
Menu Settings 117VQT1G28 Press [ ] to display the [PLAY] mode menu and select the item to set. (P108) You can convert pictures taken with a [ ] aspect ratio to a [ ] or a [ ] aspect ratio for printing. 1Press 3/4 to select [ ] or [ ] and then press [MENU/SET]. 2Press 2/1 to select a picture and then press 4. If you select and set a picture with an aspect ratio other than [ ], the message [CANNOT BE SET ON THIS PICTURE] is displayed on the screen. 3Press 2/1 to determine the horizontal position...
Page 118
![Page 118
Connecting to other equipment
118VQT1G28
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-]
(for Windows
®) on the CD-ROM (supplied)
allows you to easily acquire pictures
recorded with the camera to a PC, print
them and send them by e-mail.
If you use “Windows 98/98SE”, install
the USB driver and then connect it to
the computer.
Read the separate operating...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-117.png "Page 118
Connecting to other equipment
118VQT1G28
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-]
(for Windows
®) on the CD-ROM (supplied)
allows you to easily acquire pictures
recorded with the camera to a PC, print
them and send them by e-mail.
If you use “Windows 98/98SE”, install
the USB driver and then connect it to
the computer.
Read the separate operating...")
Connecting to other equipment 118VQT1G28 Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] (for Windows ®) on the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail. If you use “Windows 98/98SE”, install the USB driver and then connect it to the computer. Read the separate operating...
Page 119
![Page 119
Connecting to other equipment
119VQT1G28
[Windows]
The drive appears in the [My Computer]
folder.
If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by “Windows Plug and
Play”. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
The drive is displayed as [NO_NAME] or
[Untitled].
∫Folder Composition
Folders are displayed as shown in the
following...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-118.png "Page 119
Connecting to other equipment
119VQT1G28
[Windows]
The drive appears in the [My Computer]
folder.
If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by “Windows Plug and
Play”. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
The drive is displayed as [NO_NAME] or
[Untitled].
∫Folder Composition
Folders are displayed as shown in the
following...")
Connecting to other equipment 119VQT1G28 [Windows] The drive appears in the [My Computer] folder. If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by “Windows Plug and Play”. The drive then appears on the [My Computer] folder. [Macintosh] The drive is displayed on the screen. The drive is displayed as [NO_NAME] or [Untitled]. ∫Folder Composition Folders are displayed as shown in the following...
Page 120
![Page 120
Connecting to other equipment
120VQT1G28
∫PictBridge (PTP) setting
Even if you set [USB MODE] to
[PictBridge (PTP)], you can connect to your
PC if the OS is “Windows XP”,
“Windows Vista” or “Mac OS X”.
Pictures can only be read on the camera.
They cannot be written to a card or
deleted.
When there are 1000 or more pictures on
a card, the pictures may not be imported.
Do not use any other USB connection
cables except the supplied one.
Do not disconnect the USB connection
cable while [ACCESS] is...](http://img.usermanuals.tech/thumb/58/64945/w300_dmc-l10_en_om_d-119.png "Page 120
Connecting to other equipment
120VQT1G28
∫PictBridge (PTP) setting
Even if you set [USB MODE] to
[PictBridge (PTP)], you can connect to your
PC if the OS is “Windows XP”,
“Windows Vista” or “Mac OS X”.
Pictures can only be read on the camera.
They cannot be written to a card or
deleted.
When there are 1000 or more pictures on
a card, the pictures may not be imported.
Do not use any other USB connection
cables except the supplied one.
Do not disconnect the USB connection
cable while [ACCESS] is...")
Connecting to other equipment 120VQT1G28 ∫PictBridge (PTP) setting Even if you set [USB MODE] to [PictBridge (PTP)], you can connect to your PC if the OS is “Windows XP”, “Windows Vista” or “Mac OS X”. Pictures can only be read on the camera. They cannot be written to a card or deleted. When there are 1000 or more pictures on a card, the pictures may not be imported. Do not use any other USB connection cables except the supplied one. Do not disconnect the USB connection cable while [ACCESS] is...