Panasonic Digital Camera Dmc Gh4 Owners Manual

271
10. Using the Wi-Fi/NFC Function
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P292)
3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P301)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P256)
Select and send the images ([Send Images Stored in the Camera])
> [New Connection]  > [Send Images Stored in the Camera]  > 
[Smartphone]
On your...

10. Using the Wi-Fi/NFC Function
272
Displaying pictures on a TV
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P292)3Select a device you want to connect.
•When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.
•To change the setting or disconnect, press [Wi-Fi].  (P256)
•When a TV is connected to this unit, the TV screen may temporarily return to the status before 
the connection. Pictures are displayed again when you take or play back...

273
10. Using the Wi-Fi/NFC Function
Printing Wirelessly
∫Methods for sending and images that can be sent
•
Some images may not be sent depending on the device.•For details on how to send images, refer to  P299.
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P292)3Select a printer you want to connect.
4Select pictures, and then print.
•The procedure for selecting pictures is the same as the one for when the USB connection 
cable is connected.
For details, refer to  P339.
•To change...

10. Using the Wi-Fi/NFC Function
274
When sending images to AV device
You can send pictures and motion pictures  to AV devices in your house (home AV 
devices). You can also send them to the devices  (external AV devices) of your family or 
friends living away from you via “LUMIX CLUB”.
∫ Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.
•For information on the playback of images, check the operating instructions of the destination...

275
10. Using the Wi-Fi/NFC Function
1Select the menu.
2Select [Home] or [External].3Select [Via Network] or [Direct], and connect. (P292)
•When [External] is selected, [Direct] cannot be selected.
4Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P301)
5Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P256)
You cannot change the settings while sending pictures. Wait until sending is...

10. Using the Wi-Fi/NFC Function
276
When sending images to PC
∫Methods for sending and images that can be sent
¢ A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
•Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P299.
You can send pictures...

277
10. Using the Wi-Fi/NFC Function
•Create a PC user account [account name (up to 254 characters) and password (up to 32 
characters)] consisting of alphanumeric characters. An attempt to create a receive folder may 
fail if the account includes non-alphanumeric characters.
∫When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.
•For details on hardware requirements and installation, read “About the supplied software” 
(P330) .
2Create a folder that receives images with “ PHOTOfunSTUDIO...

10. Using the Wi-Fi/NFC Function
278
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P292)3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Manual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P301)
5Take pictures.
•To change the setting or disconnect,...

279
10. Using the Wi-Fi/NFC Function
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P292)3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Manual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P301)
5Select [Single Select] or [Multi Select].
•To change the...

10. Using the Wi-Fi/NFC Function
280
Using Web services
You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”.
By setting up automatic transfers of pictures and motion pictures to the Cloud Sync. 
Service, you can receive the transferred pi ctures or motion pictures on a PC or 
smartphone.
A Wireless access point BWeb service CCloud Sync. Service
Preparations:
To send images to a web service or a cloud folder, you need to register to “LUMIX 
CLUB”  (P286).
To send images to a web...