Panasonic Digital Camera Dmc Gh4 Owners Manual

261
10. Using the Wi-Fi/NFC Function
When using an SSID and password to set up a connection
1 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
2 Select the SSID displayed on the screen of the 
camera.
3 Enter the password displayed on the screen of the 
camera. 
(Only when connecting for the first time)
4 Start “ Image App ”.  (P258)
•
The connection method differs according to your smartphone/tablet.
If you are using an Android device
When scanning the QR code to set up a...

10. Using the Wi-Fi/NFC Function
262
∫Changing the connection method
To change the connection method,  press [DISP.], and then select the connection method.
When connecting with [Via Network]:
1Select [Via Network].
•Follow the connection procedure described on  P293 to connect the camera to a wireless 
access point.
2Turn on the Wi-Fi function.3Connect the smartphone/tablet to the wireless access point to which the 
camera is connected.
4Start “ Image App ”.  (P258)
When connecting with [WPS...

263
10. Using the Wi-Fi/NFC Function
Using the NFC “ Near Field Communication ” function, you can easily transfer data 
necessary for a Wi-Fi connection between  this camera and the smartphone/tablet.
1Launch “ Image App ” on your smartphone/tablet.
2While  [ ]  is displayed on the screen of 
the smartphone, touch the smartphone to 
[ ] of  the camera.
3When the connection confirmation screen 
is displayed on the camera, select [Yes].
4Touch the smartphone to [ ] of the 
camera again.
•
St e ps  3...

10. Using the Wi-Fi/NFC Function
264
•You can register up to 20 smartphones. When the number exceeds 20, registrations will be 
deleted, starting from the oldest touched one.
•Performing [Reset Wi-Fi Settings] will  delete the smartphone registration.
•If the camera is not recognized even when touching the smartphone, change positions and try 
again.
•Do not touch the smartphone to this camera strongly.
•For information on the operation and settings of NFC-compatible smartphones, refer to the 
operating...

265
10. Using the Wi-Fi/NFC Function
1Connect to a smartphone.  (P259)2Operate the smartphone.
1Connect to a smartphone. (P259)2Operate the smartphone.
•
The function can be assigned to the top, bottom, 
left or right according to your preference.
•Pictures in RAW format and motion pictures of 
[AVCHD], [MP4] (only when the motion picture size is set to [4K] in [Rec Quality]), [MP4 
(LPCM)] and [MOV] cannot be saved.
•3D pictures (MPO format) will be saved as 2D pictures (JPEG format).
Playing back...

10. Using the Wi-Fi/NFC Function
266
A Wi-Fi connection using NFC function is possible by touching the smartphone to this unit, 
and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after  taking it, so you can easily send it to the 
smartphone
¢ of your family or friend.¢ Installing the “ Image App ” is required for use.
1Play back the picture in the camera.
2Launch “ Image App ” on the smartphone.3While  [ ]  is displayed on the connection 
screen of the...

267
10. Using the Wi-Fi/NFC Function
1Connect to a smartphone.  (P259)2Operate the smartphone.
•
The function can be assigned to the top, bottom, 
left or right according to your preference.
You can send location information acquired with a smartphone to the camera. After 
sending the information, you can also write it on images stored in the camera.
1 Start recording location information
2 Start recording images
3 Finish recording the location information
4 Sending and writing location information
•...

10. Using the Wi-Fi/NFC Function
268
∫Start recording location information
Operate the smartphone.
∫ Finish recording the location information
Operate the smartphone.
∫ Sending and writing location information
1Connect to a smartphone.  (P259)
2Operate the smartphone.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject 
when you use this function. Use at your own risk.
•On the smartphone, you can set the acquisition interval of location...

269
10. Using the Wi-Fi/NFC Function
∫Methods for sending and images that can be sent
¢ Excluding motion pictures recorded with their size set to [4K] in [Rec Quality]•Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P299.
Sending images to a smartphone/tablet by controlling the camera
JPEGRAWMP4AVCHDMP4 
(LPCM)MOV3D
Sending an image each...

10. Using the Wi-Fi/NFC Function
270
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P292)
3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P301)
4Take pictures.
•The pictures are sent automatically after taking them.•To change the setting or disconnect, press [Wi-Fi].  (P256)
You cannot change the settings while sending pictures. Wait until sending is complete.
Sending an image each time a...