Panasonic Digital Camera Dmc Gh4 Owners Manual

131
5. Picture Quality and Color Tone Settings
Not available in these cases:
•
The following effects are not reflected in RAW images:–Intelligent Auto Mode–Intelligent Auto Plus Mode
–Creative Control Mode–White Balance¢ 1
–[Photo Style]¢1/[Highlight Shadow]¢1/[i.Dynamic]¢1/[Red-Eye Removal]¢ 2/[i.Resolution]¢1/
[Color Space]¢ 1 ([Rec] menu)
¢ 1 If you perform [RAW Processing] in the [Playback] menu on a picture, you can process it into 
a picture in JPEG format with the settings at the time of...

5. Picture Quality and Color Tone Settings
132
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sens itivity) to be set. Setting to a higher figure 
enables pictures to be taken even in dark plac es without the resulting pictures coming out 
dark.
1Press [ ].
2Select the ISO sensitivity by rotating the rear 
dial or the front dial.
3Press [ ] to set.
•You can also press the shutter button halfway to set.
¢ 1 When the [ISO Limit Set]  (P133) of [Rec] menu is set to anything except...

133
5. Picture Quality and Color Tone Settings
Characteristics of the ISO sensitivity
•
For the focus range of flash when [AUTO] is set, refer to  P181.•[ ] is not available in Shutter-Priority AE Mode and Manual Exposure Mode.•When [Multi Exp.] is set, the maximum setting is [ISO3200].
•Setting items below will be selectable in Creative Video Mode.
[AUTO]/[200] to [6400]
•When [Electronic Shutter] is set to [ON], the lSO sensitivity can be set up to [ISO3200].
It will select optimal ISO sensitivity with...

5. Picture Quality and Color Tone Settings
134
You can adjust the ISO sensitivity settings for every 1/3 EV.
¢ Only available when [Extended ISO] is set.
•When the setting is changed from [1/3 EV] to [1 EV ], [Sensitivity] will be set to value closest to 
the value set during the [1/3 EV].
ISO sensitivity can be set up to minimum [ISO100].
Settings: [ON]/[OFF]
Setting the step increment of ISO sensitivity
Applicable modes: 
> [Rec] > [ISO Increments]
[1/3 EV] [L.100]
¢/[L.125]¢/[L.160]¢/[200 ]/[250...

135
5. Picture Quality and Color Tone Settings
Adjusting the White Balance
In sunlight, under incandescent lights or in ot her such conditions where the color of white 
takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to 
what is seen by the eye in ac cordance with the light source.
1Press [ ].
2Rotate the rear dial or front dial to select the 
White Balance.
•Setting can also be performed by rotating the control dial.
3Press [ ] to set.
•You can also press the...

5. Picture Quality and Color Tone Settings
136
•The White Balance is only calculated for subjects within the range of the camera’s flash.  (P181)
∫Auto White Balance
Depending on the conditions prevailing when pictur es are taken, the pictures may take on 
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being 
used or there is nothing with a color close to white, Auto White Balance may not function 
properly. In a case like this, set the White Balance to a mode other...

137
5. Picture Quality and Color Tone Settings
Set the White Balance value. Use to match the condition when taking photographs.
1Press [ ].
2Rotate the rear dial or front dial to select [ ], [ ], [ ], or  [ ], and then 
press  3.
3Aim the camera at a sheet of white paper etc. so that 
the frame in the center is filled by the white object 
only and then press [MENU/SET].
•
The same operation can be performed by pressing the 
shutter button.
•White Balance may not be set when the subject is too bright or...

5. Picture Quality and Color Tone Settings
138
You can finely adjust the White Balance when you cannot acquire the desired hue by 
setting the White Balance.
1Press [ ].
2Rotate the rear dial or front dial to select the White Balance, and then press  4.3Press  3/4 /2 /1  to fine-adjust the White Balance.
•
You can also make fine adjustments by touching the White 
Balance graph.
•Pressing [DISP.] resets the position back to the center.
4Press [MENU/SET].
•
If you finely adjust the White Balance to [A]...

139
5. Picture Quality and Color Tone Settings
Bracket setting is performed based on the adju stment values for the White Balance fine 
adjustment, and 3 pictures with different co lors are automatically recorded when the 
shutter button is pressed once.
1Press [ ].2Rotate the rear dial or front dial to select the White 
Balance, and then press  4.
3Rotate the control dial to set the bracket.
Rotating the control dial to the right: Horizontal ([A] to [B])
Rotating the control dial to the left: Vertical...

5. Picture Quality and Color Tone Settings
140
Adjusting the Picture Quality by Adding an 
Effect 
([Photo Style])
6 effects can be selected to match the image you wish to record. It is possible to adjust the 
items such as color or picture quality of the effect to your desire.
¢1 This is disabled when Intelligen t Auto Plus Mode is selected.
¢ 2 These can be set only in Creative Video Mode.
¢ 3 When the actual brightness and the brightness to be captured are adjusted at each 
brightness level, the...