Panasonic Digital Camera Dmc Gh4 Owners Manual
Here you can view all the pages of manual Panasonic Digital Camera Dmc Gh4 Owners Manual . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 111
111 4. Focus and Shutter (Drive Mode) Settings Highlighting/not highlighting in-focus portions • When [Peaking] is set, [ ] ([Detect Level]: [HIGH]) or [ ] ([Detect Level]: [LOW]) will be displayed. •Each time [ ] in [ ] is touched, the setting is switched in order of [ON] ([Detect Level]: [LOW]) > [ON] ([Detect Level]: [HIGH]) > [OFF].•Each time the set function button is pressed when [Peaking] is set to [Fn Button Set] (P317) in the [Custom] menu, the peaking setting switches in order of [ON]...
Page 112
4. Focus and Shutter (Drive Mode) Settings 112 Select a Drive Mode You can change what the camera will do when you press the shutter button. Rotating the drive mode dial. Applicable modes: [Single] When the shutter button is pressed, only one picture is recorded. [Burst] (P113) Recordings are made in succession while the shutter button is pressed. [Auto Bracket] (P116)Each time the shutter button is pressed, recordings are made with different exposure settings according to the Exposure...
Page 113
113 4. Focus and Shutter (Drive Mode) Settings Taking Pictures using Burst Mode Pictures are taken continuously while the shutter button is pressed. •Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P225). 1Set the drive mode dial to [ ] . 2Focus on the subject and take a picture. •Hold down the shutter button fully to activate the Burst Mode. ∫Changing the burst speed 1Select the menu. (P54) 2Press 3/4 to select the burst speed and then press [MENU/SET]. Applicable...
Page 114
4. Focus and Shutter (Drive Mode) Settings 114 •The Burst speed may become slower depending on the following settings.–[Picture Size] (P129) /[Quality] (P130)/[Sensitivity] (P132)/[Focus Mode] (P93)/[Focus/ Release Priority] (P307) •Refer to P130 for information about RAW files.•Exit the menu after it is set. ∫About the maximum number of pictures that can be taken continuously When you press the shutter button halfway, the maximum number of pictures you can take cont inuously will appear. You can...
Page 115
115 4. Focus and Shutter (Drive Mode) Settings •We recommend using the shutter remote control (DMW-RSL1: optional) when you want to keep the shutter button pressed fully while taking pictures in Burst Mode. Refer to P353 for information about the shutter remote control. •When the burst speed is set to [SH] or [H] (when focus mode is [AFS] or [MF]), the exposure and White Balance are fixed at the settings used for the first picture for the subsequent pictures as well. When the burst speed is set to...
Page 116
4. Focus and Shutter (Drive Mode) Settings 116 Taking Pictures using Auto Bracket Maximum of 7 pictures will be recorded with different exposure settings following the Exposure Compensation range every ti me the shutter button is pressed. With Auto Bracket [Step]: [3 •1/3], [Sequence]: [0/ s/r ] 1Set the drive mode dial to [ ] . 2Focus on the subject and take a picture. •If you press and hold the shutter button, the number of pictures that you set is taken. •The Auto Bracket indication blinks until the...
Page 117
117 4. Focus and Shutter (Drive Mode) Settings ∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto Bracket 1Select the menu. (P54) 2Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then press [MENU/SET]. 3Press 3/4 to select the setting and then press [MENU/SET]. • You can take one picture at a time when set to [ ].•You can continuously take pictures up to set numbers when set to [ ]. •Exit the menu after it is set. •When taking pictures using...
Page 118
4. Focus and Shutter (Drive Mode) Settings 118 Taking Pictures with the Self-timer 1Set the drive mode dial to [ ] . 2Press the shutter button halfway to focus and then press it fully to take the picture. •Focus and exposure will be set when the shutter button is pressed halfway. •After the self-timer indicator flashes, recording starts. Applicable modes:
Page 119
119 4. Focus and Shutter (Drive Mode) Settings ∫ Changing the time setting for the self-timer 1Select the menu. (P54) 2Press 3/4 to select the mode and then press [MENU/SET]. • Exit the menu after it is set. •The flash output may vary slightly when the [ ] is selected. Not available in these cases: • It cannot be set to [ ] in the following cases.–When White Balance Bracket is set –[Multi Exp.] > [Rec] > [Self Timer] Picture is taken 10 seconds after shutter is pressed. After 10 seconds the camera...
Page 120
4. Focus and Shutter (Drive Mode) Settings 120 Taking Pictures Automatically at Set Intervals ([Time Lapse Shot]) If you set the start time of recording, the recording interval and the number of pictures, the camera can automatically take pictures of s ubjects such as animals or plants as time elapses and create a motion picture. • Set the date and time settings in advance. (P36)•Pictures taken with Time Lapse Shot are displayed as a set of group pictures. (P225) •When [System Frequency] is set to...